[PATCH v2 3/4] Documentation/local_ops.txt: convert to ReST markup

From: Silvio Fricke
Date: Fri Nov 25 2016 - 05:06:10 EST


... and move to core-api folder.

Signed-off-by: Silvio Fricke <silvio.fricke@xxxxxxxxx>
---
Documentation/core-api/index.rst | 1 +-
Documentation/local_ops.txt => Documentation/core-api/local_ops.rst | 275 +++----
2 files changed, 147 insertions(+), 129 deletions(-)

diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index f3e5f5e..25b4e4a 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -9,6 +9,7 @@ Kernel and driver related documentation.

assoc_array
atomic_ops
+ local_ops
workqueue

.. only:: subproject
diff --git a/Documentation/local_ops.txt b/Documentation/core-api/local_ops.rst
similarity index 55%
rename from Documentation/local_ops.txt
rename to Documentation/core-api/local_ops.rst
index 407576a..01f1880 100644
--- a/Documentation/local_ops.txt
+++ b/Documentation/core-api/local_ops.rst
@@ -1,191 +1,208 @@
- Semantics and Behavior of Local Atomic Operations

- Mathieu Desnoyers
+.. _local_ops:

+=================================================
+Semantics and Behavior of Local Atomic Operations
+=================================================

- This document explains the purpose of the local atomic operations, how
+:Author: Mathieu Desnoyers
+
+
+This document explains the purpose of the local atomic operations, how
to implement them for any given architecture and shows how they can be used
properly. It also stresses on the precautions that must be taken when reading
those local variables across CPUs when the order of memory writes matters.

-Note that local_t based operations are not recommended for general kernel use.
-Please use the this_cpu operations instead unless there is really a special purpose.
-Most uses of local_t in the kernel have been replaced by this_cpu operations.
-this_cpu operations combine the relocation with the local_t like semantics in
-a single instruction and yield more compact and faster executing code.
+.. note::

+ Note that ``local_t`` based operations are not recommended for general
+ kernel use. Please use the ``this_cpu`` operations instead unless there is
+ really a special purpose. Most uses of ``local_t`` in the kernel have been
+ replaced by ``this_cpu`` operations. ``this_cpu`` operations combine the
+ relocation with the ``local_t`` like semantics in a single instruction and
+ yield more compact and faster executing code.

-* Purpose of local atomic operations
+
+Purpose of local atomic operations
+==================================

Local atomic operations are meant to provide fast and highly reentrant per CPU
counters. They minimize the performance cost of standard atomic operations by
removing the LOCK prefix and memory barriers normally required to synchronize
across CPUs.

-Having fast per CPU atomic counters is interesting in many cases : it does not
+Having fast per CPU atomic counters is interesting in many cases: it does not
require disabling interrupts to protect from interrupt handlers and it permits
coherent counters in NMI handlers. It is especially useful for tracing purposes
and for various performance monitoring counters.

Local atomic operations only guarantee variable modification atomicity wrt the
CPU which owns the data. Therefore, care must taken to make sure that only one
-CPU writes to the local_t data. This is done by using per cpu data and making
-sure that we modify it from within a preemption safe context. It is however
-permitted to read local_t data from any CPU : it will then appear to be written
-out of order wrt other memory writes by the owner CPU.
+CPU writes to the ``local_t`` data. This is done by using per cpu data and
+making sure that we modify it from within a preemption safe context. It is
+however permitted to read ``local_t`` data from any CPU: it will then appear to
+be written out of order wrt other memory writes by the owner CPU.


-* Implementation for a given architecture
+Implementation for a given architecture
+=======================================

-It can be done by slightly modifying the standard atomic operations : only
+It can be done by slightly modifying the standard atomic operations: only
their UP variant must be kept. It typically means removing LOCK prefix (on
i386 and x86_64) and any SMP synchronization barrier. If the architecture does
-not have a different behavior between SMP and UP, including asm-generic/local.h
-in your architecture's local.h is sufficient.
+not have a different behavior between SMP and UP, including
+``asm-generic/local.h`` in your architecture's ``local.h`` is sufficient.

-The local_t type is defined as an opaque signed long by embedding an
-atomic_long_t inside a structure. This is made so a cast from this type to a
-long fails. The definition looks like :
+The ``local_t`` type is defined as an opaque ``signed long`` by embedding an
+``atomic_long_t`` inside a structure. This is made so a cast from this type to
+a ``long`` fails. The definition looks like::

-typedef struct { atomic_long_t a; } local_t;
+ typedef struct { atomic_long_t a; } local_t;


-* Rules to follow when using local atomic operations
+Rules to follow when using local atomic operations
+==================================================

-- Variables touched by local ops must be per cpu variables.
-- _Only_ the CPU owner of these variables must write to them.
-- This CPU can use local ops from any context (process, irq, softirq, nmi, ...)
- to update its local_t variables.
-- Preemption (or interrupts) must be disabled when using local ops in
- process context to make sure the process won't be migrated to a
+* Variables touched by local ops must be per cpu variables.
+* *Only* the CPU owner of these variables must write to them.
+* This CPU can use local ops from any context (process, irq, softirq, nmi, ...)
+ to update its ``local_t`` variables.
+* Preemption (or interrupts) must be disabled when using local ops in
+ process context to make sure the process won't be migrated to a
different CPU between getting the per-cpu variable and doing the
actual local op.
-- When using local ops in interrupt context, no special care must be
+* When using local ops in interrupt context, no special care must be
taken on a mainline kernel, since they will run on the local CPU with
preemption already disabled. I suggest, however, to explicitly
disable preemption anyway to make sure it will still work correctly on
-rt kernels.
-- Reading the local cpu variable will provide the current copy of the
+* Reading the local cpu variable will provide the current copy of the
variable.
-- Reads of these variables can be done from any CPU, because updates to
- "long", aligned, variables are always atomic. Since no memory
+* Reads of these variables can be done from any CPU, because updates to
+ "``long``", aligned, variables are always atomic. Since no memory
synchronization is done by the writer CPU, an outdated copy of the
- variable can be read when reading some _other_ cpu's variables.
+ variable can be read when reading some *other* cpu's variables.
+

+How to use local atomic operations
+==================================

-* How to use local atomic operations
+.. code-block:: c

-#include <linux/percpu.h>
-#include <asm/local.h>
+ #include <linux/percpu.h>
+ #include <asm/local.h>

-static DEFINE_PER_CPU(local_t, counters) = LOCAL_INIT(0);
+ static DEFINE_PER_CPU(local_t, counters) = LOCAL_INIT(0);


-* Counting
+Counting
+========

Counting is done on all the bits of a signed long.

-In preemptible context, use get_cpu_var() and put_cpu_var() around local atomic
-operations : it makes sure that preemption is disabled around write access to
-the per cpu variable. For instance :
+In preemptible context, use ``get_cpu_var()`` and ``put_cpu_var()`` around
+local atomic operations: it makes sure that preemption is disabled around write
+access to the per cpu variable. For instance::

- local_inc(&get_cpu_var(counters));
- put_cpu_var(counters);
+ local_inc(&get_cpu_var(counters));
+ put_cpu_var(counters);

If you are already in a preemption-safe context, you can use
-this_cpu_ptr() instead.
+``this_cpu_ptr()`` instead. ::

- local_inc(this_cpu_ptr(&counters));
+ local_inc(this_cpu_ptr(&counters));



-* Reading the counters
+Reading the counters
+====================

Those local counters can be read from foreign CPUs to sum the count. Note that
the data seen by local_read across CPUs must be considered to be out of order
-relatively to other memory writes happening on the CPU that owns the data.
+relatively to other memory writes happening on the CPU that owns the data. ::

- long sum = 0;
- for_each_online_cpu(cpu)
- sum += local_read(&per_cpu(counters, cpu));
+ long sum = 0;
+ for_each_online_cpu(cpu)
+ sum += local_read(&per_cpu(counters, cpu));

If you want to use a remote local_read to synchronize access to a resource
-between CPUs, explicit smp_wmb() and smp_rmb() memory barriers must be used
+between CPUs, explicit ``smp_wmb()`` and ``smp_rmb()`` memory barriers must be used
respectively on the writer and the reader CPUs. It would be the case if you use
-the local_t variable as a counter of bytes written in a buffer : there should
-be a smp_wmb() between the buffer write and the counter increment and also a
-smp_rmb() between the counter read and the buffer read.
-
-
-Here is a sample module which implements a basic per cpu counter using local.h.
-
---- BEGIN ---
-/* test-local.c
- *
- * Sample module for local.h usage.
- */
-
-
-#include <asm/local.h>
-#include <linux/module.h>
-#include <linux/timer.h>
-
-static DEFINE_PER_CPU(local_t, counters) = LOCAL_INIT(0);
-
-static struct timer_list test_timer;
-
-/* IPI called on each CPU. */
-static void test_each(void *info)
-{
- /* Increment the counter from a non preemptible context */
- printk("Increment on cpu %d\n", smp_processor_id());
- local_inc(this_cpu_ptr(&counters));
-
- /* This is what incrementing the variable would look like within a
- * preemptible context (it disables preemption) :
- *
- * local_inc(&get_cpu_var(counters));
- * put_cpu_var(counters);
- */
-}
-
-static void do_test_timer(unsigned long data)
-{
- int cpu;
-
- /* Increment the counters */
- on_each_cpu(test_each, NULL, 1);
- /* Read all the counters */
- printk("Counters read from CPU %d\n", smp_processor_id());
- for_each_online_cpu(cpu) {
- printk("Read : CPU %d, count %ld\n", cpu,
- local_read(&per_cpu(counters, cpu)));
- }
- del_timer(&test_timer);
- test_timer.expires = jiffies + 1000;
- add_timer(&test_timer);
-}
-
-static int __init test_init(void)
-{
- /* initialize the timer that will increment the counter */
- init_timer(&test_timer);
- test_timer.function = do_test_timer;
- test_timer.expires = jiffies + 1;
- add_timer(&test_timer);
-
- return 0;
-}
-
-static void __exit test_exit(void)
-{
- del_timer_sync(&test_timer);
-}
-
-module_init(test_init);
-module_exit(test_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mathieu Desnoyers");
-MODULE_DESCRIPTION("Local Atomic Ops");
---- END ---
+the ``local_t`` variable as a counter of bytes written in a buffer: there should
+be a ``smp_wmb()`` between the buffer write and the counter increment and also a
+``smp_rmb()`` between the counter read and the buffer read.
+
+
+Here is a sample module which implements a basic per cpu counter using
+``local.h``.
+
+.. code-block:: c
+
+ /* test-local.c
+ *
+ * Sample module for local.h usage.
+ */
+
+
+ #include <asm/local.h>
+ #include <linux/module.h>
+ #include <linux/timer.h>
+
+ static DEFINE_PER_CPU(local_t, counters) = LOCAL_INIT(0);
+
+ static struct timer_list test_timer;
+
+ /* IPI called on each CPU. */
+ static void test_each(void *info)
+ {
+ /* Increment the counter from a non preemptible context */
+ printk("Increment on cpu %d\n", smp_processor_id());
+ local_inc(this_cpu_ptr(&counters));
+
+ /* This is what incrementing the variable would look like within a
+ * preemptible context (it disables preemption) :
+ *
+ * local_inc(&get_cpu_var(counters));
+ * put_cpu_var(counters);
+ */
+ }
+
+ static void do_test_timer(unsigned long data)
+ {
+ int cpu;
+
+ /* Increment the counters */
+ on_each_cpu(test_each, NULL, 1);
+ /* Read all the counters */
+ printk("Counters read from CPU %d\n", smp_processor_id());
+ for_each_online_cpu(cpu) {
+ printk("Read : CPU %d, count %ld\n", cpu,
+ local_read(&per_cpu(counters, cpu)));
+ }
+ del_timer(&test_timer);
+ test_timer.expires = jiffies + 1000;
+ add_timer(&test_timer);
+ }
+
+ static int __init test_init(void)
+ {
+ /* initialize the timer that will increment the counter */
+ init_timer(&test_timer);
+ test_timer.function = do_test_timer;
+ test_timer.expires = jiffies + 1;
+ add_timer(&test_timer);
+
+ return 0;
+ }
+
+ static void __exit test_exit(void)
+ {
+ del_timer_sync(&test_timer);
+ }
+
+ module_init(test_init);
+ module_exit(test_exit);
+
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Mathieu Desnoyers");
+ MODULE_DESCRIPTION("Local Atomic Ops");
--
git-series 0.9.1