Re: Synopsys Ethernet QoS Driver

From: Giuseppe CAVALLARO
Date: Fri Nov 25 2016 - 05:06:50 EST

On 11/23/2016 12:43 PM, Joao Pinto wrote:
> Rabin Vincent can review and test that the port works properly on our Artpec-chips that use dwc_eth_qos.c today.
> The main porting step is to implement the device tree binding in bindings/net/snps,dwc-qos-ethernet.txt. Also our chip has a strict requirement that the phy is enabled when the SWR reset bit is set (it needs a tx clock to complete the reset).
> - Lars
Ok, I will do the task.

@Peppe: Agree with the plan?