Re: [PATCH net-next 1/4] net: dsa: move up phy enabling in core

From: Florian Fainelli
Date: Fri Sep 22 2017 - 12:52:48 EST


On 09/22/2017 09:17 AM, Vivien Didelot wrote:
> bcm_sf2 is currently the only driver using the phy argument passed to
> .port_enable. It resets the state machine if the phy has been hard
> reset. This check is generic and can be moved to DSA core.

This is completely specific to bcm_sf2 because it does call
bcm_sf2_gphy_enable_set() which performs a HW reset of the PHY, you
can't move this to the generic portion of net/dsa/slave.c. NACK.

>
> Signed-off-by: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx>
> ---
> drivers/net/dsa/bcm_sf2.c | 16 +---------------
> net/dsa/slave.c | 15 +++++++++++++--
> 2 files changed, 14 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
> index 898d5642b516..ad96b9725a2c 100644
> --- a/drivers/net/dsa/bcm_sf2.c
> +++ b/drivers/net/dsa/bcm_sf2.c
> @@ -184,22 +184,8 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
> core_writel(priv, reg, CORE_PORT_TC2_QOS_MAP_PORT(port));
>
> /* Re-enable the GPHY and re-apply workarounds */
> - if (priv->int_phy_mask & 1 << port && priv->hw_params.num_gphy == 1) {
> + if (priv->int_phy_mask & 1 << port && priv->hw_params.num_gphy == 1)
> bcm_sf2_gphy_enable_set(ds, true);
> - if (phy) {
> - /* if phy_stop() has been called before, phy
> - * will be in halted state, and phy_start()
> - * will call resume.
> - *
> - * the resume path does not configure back
> - * autoneg settings, and since we hard reset
> - * the phy manually here, we need to reset the
> - * state machine also.
> - */
> - phy->state = PHY_READY;
> - phy_init_hw(phy);
> - }
> - }
>
> /* Enable MoCA port interrupts to get notified */
> if (port == priv->moca_port)
> diff --git a/net/dsa/slave.c b/net/dsa/slave.c
> index 02ace7d462c4..606812160fd5 100644
> --- a/net/dsa/slave.c
> +++ b/net/dsa/slave.c
> @@ -72,6 +72,7 @@ static int dsa_slave_get_iflink(const struct net_device *dev)
> static int dsa_slave_open(struct net_device *dev)
> {
> struct dsa_slave_priv *p = netdev_priv(dev);
> + struct phy_device *phy = p->phy;
> struct dsa_port *dp = p->dp;
> struct dsa_switch *ds = dp->ds;
> struct net_device *master = dsa_master_netdev(p);
> @@ -106,8 +107,18 @@ static int dsa_slave_open(struct net_device *dev)
>
> dsa_port_set_state_now(p->dp, stp_state);
>
> - if (p->phy)
> - phy_start(p->phy);
> + if (phy) {
> + /* If phy_stop() has been called before, phy will be in
> + * halted state, and phy_start() will call resume.
> + *
> + * The resume path does not configure back autoneg
> + * settings, and since the internal phy may have been
> + * hard reset, we need to reset the state machine also.
> + */
> + phy->state = PHY_READY;
> + phy_init_hw(phy);
> + phy_start(phy);
> + }
>
> return 0;
>
>


--
Florian