[PATCH RFC v2 03/14] drivers: irqchip: pdc: Do not toggle IRQ_ENABLE during mask/unmask

From: Lina Iyer
Date: Fri Sep 13 2019 - 18:00:29 EST

When an interrupt is to be serviced, the convention is to mask the
interrupt at the chip and unmask after servicing the interrupt. Enabling
and disabling the interrupt at the PDC irqchip causes an interrupt storm
due to the way dual edge interrupts are handled in hardware.

Skip configuring the PDC when the IRQ is masked and unmasked, instead
use the irq_enable/irq_disable callbacks to toggle the IRQ_ENABLE
register at the PDC. The PDC's IRQ_ENABLE register is only used during
the monitoring mode when the system is asleep and is not needed for
active mode detection.

Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx>
drivers/irqchip/qcom-pdc.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
index b230794..5eef5ea 100644
--- a/drivers/irqchip/qcom-pdc.c
+++ b/drivers/irqchip/qcom-pdc.c
@@ -63,15 +63,25 @@ static void pdc_enable_intr(struct irq_data *d, bool on)

-static void qcom_pdc_gic_mask(struct irq_data *d)
+static void qcom_pdc_gic_disable(struct irq_data *d)
pdc_enable_intr(d, false);
+ irq_chip_disable_parent(d);
+static void qcom_pdc_gic_enable(struct irq_data *d)
+ pdc_enable_intr(d, true);
+ irq_chip_enable_parent(d);
+static void qcom_pdc_gic_mask(struct irq_data *d)

static void qcom_pdc_gic_unmask(struct irq_data *d)
- pdc_enable_intr(d, true);

@@ -148,6 +158,8 @@ static struct irq_chip qcom_pdc_gic_chip = {
.irq_eoi = irq_chip_eoi_parent,
.irq_mask = qcom_pdc_gic_mask,
.irq_unmask = qcom_pdc_gic_unmask,
+ .irq_disable = qcom_pdc_gic_disable,
+ .irq_enable = qcom_pdc_gic_enable,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_set_type = qcom_pdc_gic_set_type,
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project