Re: [PATCH 4/4] regulator: rpmh-regulator: Add RPMH regulator support for Glymur

[Dmitry Baryshkov]

On Tue, Sep 16, 2025 at 01:28:18PM +0530, Kamal Wadhwa wrote:
> Add support for PMH0101/PMCX0102/PMH0110/PMH0104 PMIC voltage
> regulators which are present on Glymur boards.
> 
> Introduce new LDOs & SMPSs under them (PMIC5 subtype 530 for
> both).
> 
> For these new LDOs support a new optimum power mode(OPM). In
> this mode LDO will automatically switch between high power mode
> (HPM) and low power mode (LPM) based on the real-time LDO load
> current. Its operation is analogous to SMPS AUTO mode.
> 
> Co-developed-by: Jishnu Prakash <jishnu.prakash@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jishnu Prakash <jishnu.prakash@xxxxxxxxxxxxxxxx>
> Signed-off-by: Kamal Wadhwa <kamal.wadhwa@xxxxxxxxxxxxxxxx>
> ---
>  drivers/regulator/qcom-rpmh-regulator.c | 188 +++++++++++++++++++++++++++++++-
>  1 file changed, 187 insertions(+), 1 deletion(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>


-- 
With best wishes
Dmitry