[PATCH 2/5] clk: qcom: dispcc-kaanapali: Fix DSI byte clock rate setting

[Konrad Dybcio]

From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

The clock tree for byte_clk_src is as follows:

   ┌──────byte0_clk_src─────┐
   │                        │
byte0_clk            byte0_div_clk_src
                            │
                     byte0_intf_clk

If both of its direct children have CLK_SET_RATE_PARENT with different
requests, byte0_clk_src (and its parent) will be reconfigured. In this
case, byte0_intf should strictly follow the rate of byte0_clk (with
some adjustments based on PHY mode).

Remove CLK_SET_RATE_PARENT from byte0_div_clk_src to avoid this issue.

Fixes: 6c6750b7061c ("clk: qcom: dispcc: Add support for display clock controller Kaanapali")
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
---
 drivers/clk/qcom/dispcc-kaanapali.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/clk/qcom/dispcc-kaanapali.c b/drivers/clk/qcom/dispcc-kaanapali.c
index baae2ec1f72a..c1578cd07041 100644
--- a/drivers/clk/qcom/dispcc-kaanapali.c
+++ b/drivers/clk/qcom/dispcc-kaanapali.c
@@ -800,7 +800,6 @@ static struct clk_regmap_div disp_cc_mdss_byte0_div_clk_src = {
 			&disp_cc_mdss_byte0_clk_src.clkr.hw,
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT,
 		.ops = &clk_regmap_div_ops,
 	},
 };
@@ -815,7 +814,6 @@ static struct clk_regmap_div disp_cc_mdss_byte1_div_clk_src = {
 			&disp_cc_mdss_byte1_clk_src.clkr.hw,
 		},
 		.num_parents = 1,
-		.flags = CLK_SET_RATE_PARENT,
 		.ops = &clk_regmap_div_ops,
 	},
 };

-- 
2.53.0