Re: [PATCH v2 01/11] dt-bindings: crypto: qcom,ice: Allow power-domain and iface clk

[Konrad Dybcio]

On 3/10/26 9:06 AM, Harshal Dev wrote:
> Update the inline-crypto engine DT binding to allow specifying up to two
> clocks along with their names and associated power-domain. When the
> 'clk_ignore_unused' flag is not passed on the kernel command line
> occasional unclocked ICE hardware register access are observed during ICE
> driver probe based on the relative timing between the probe and the kernel
> disabling the unused clocks. On the other hand, when the 'pd_ignore_unused'
> flag is not passed on the command line, clock 'stuck' issues are
> observed if the power-domain required by ICE hardware is unused and thus
> disabled before ICE probe. To avoid these scenarios, the 'iface' clock and
> the associated power-domain should be specified in the ICE device tree node
> and the 'iface' clock should be voted on by the ICE driver during probe.
> 
> Fixes: f6ff91a47ac57 ("dt-bindings: crypto: Add Qualcomm Inline Crypto Engine")
> Signed-off-by: Harshal Dev <harshal.dev@xxxxxxxxxxxxxxxx>
> ---
>  .../bindings/crypto/qcom,inline-crypto-engine.yaml       | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
> index c3408dcf5d20..d9a0a8adf645 100644
> --- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
> +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
> @@ -28,6 +28,16 @@ properties:
>      maxItems: 1
>  
>    clocks:
> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    minItems: 1
> +    items:
> +      - const: ice_core_clk
> +      - const: iface_clk

Trim the "_clk", we know they're clocks, because they come under.. you
know.. the 'clocks' property! :D

Konrad