[PATCH 05/12] ARM: dts: imx6xp: Use undeprecated reset-gpios

[Krzysztof Kozlowski]

Freescale i.MX6 PCIe host controller bindings through referenced
snps,dw-pcie-common.yaml schema already document "reset-gpios", just
like Linux kernel did for a long time.  Use the preferred form over
"reset-gpio" deprecated since commit 42694f9f6407 ("dt-bindings: PCI:
add snps,dw-pcie.yaml") in 2021.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts         | 2 +-
 arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi                | 2 +-
 arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts
index 1c1515a854c8..6dd382cffa3d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-nitrogen6sx.dts
@@ -224,7 +224,7 @@ &i2c3 {
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
index 3e238d8118fa..11e8efcc1fce 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
@@ -282,7 +282,7 @@ codec: wm8962@1a {
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcie_gpio>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts
index 2ffbe2df4776..6dd626f15a9e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-softing-vining-2000.dts
@@ -499,7 +499,7 @@ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7	0x170f9
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
 	reset-gpio-active-high;
 	status = "okay";
 };

-- 
2.51.0