[PATCH 12/12] arm64: dts: imx95: Use undeprecated reset-gpios

[Krzysztof Kozlowski]

Freescale i.MX6 PCIe host controller bindings through referenced
snps,dw-pcie-common.yaml schema already document "reset-gpios", just
like Linux kernel did for a long time.  Use the preferred form over
"reset-gpio" deprecated since commit 42694f9f6407 ("dt-bindings: PCI:
add snps,dw-pcie.yaml") in 2021.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts        | 2 +-
 arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts       | 2 +-
 arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts        | 4 ++--
 arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts | 4 ++--
 arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts   | 4 ++--
 5 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
index d4184fb8b28c..d0f2d3beb72b 100644
--- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
@@ -554,7 +554,7 @@ &netcmix_blk_ctrl {
 &pcie0 {
 	pinctrl-0 = <&pinctrl_pcie0>;
 	pinctrl-names = "default";
-	reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_m2_pwr>;
 	vpcie3v3aux-supply = <&reg_m2_pwr>;
 	supports-clkreq;
diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts
index 0f43e3be7058..7a615b1f6199 100644
--- a/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts
@@ -549,7 +549,7 @@ &netcmix_blk_ctrl {
 &pcie0 {
 	pinctrl-0 = <&pinctrl_pcie0>;
 	pinctrl-names = "default";
-	reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	supports-clkreq;
 	vpcie-supply = <&reg_m2_mkey_pwr>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 041fd838fabb..4439658681f0 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -540,7 +540,7 @@ &netc_timer {
 &pcie0 {
 	pinctrl-0 = <&pinctrl_pcie0>;
 	pinctrl-names = "default";
-	reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcie0>;
 	vpcie3v3aux-supply = <&reg_pcie0>;
 	supports-clkreq;
@@ -557,7 +557,7 @@ &pcie0_ep {
 &pcie1 {
 	pinctrl-0 = <&pinctrl_pcie1>;
 	pinctrl-names = "default";
-	reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_slot_pwr>;
 	vpcie3v3aux-supply = <&reg_slot_pwr>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts
index 2b0ff232f680..1f2240bd21f8 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts
@@ -305,7 +305,7 @@ ethphy0: ethernet-phy@1 {
 &pcie0 {
 	pinctrl-0 = <&pinctrl_pcie0>;
 	pinctrl-names = "default";
-	reset-gpio = <&i2c7_pcal6524 17 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&i2c7_pcal6524 17 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_pcie0>;
 	status = "okay";
 };
@@ -313,7 +313,7 @@ &pcie0 {
 &pcie1 {
 	pinctrl-0 = <&pinctrl_pcie1>;
 	pinctrl-names = "default";
-	reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts b/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts
index 26c2df9b1b60..99ce38df4538 100644
--- a/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-libra-rdk-fpsc.dts
@@ -243,13 +243,13 @@ ethphy2: ethernet-phy@8 {
 };
 
 &pcie0 {
-	reset-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_vdd_3v3>;
 	status = "okay";
 };
 
 &pcie1 {
-	reset-gpio = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 	vpcie-supply = <&reg_vdd_3v3>;
 	status = "okay";
 };

-- 
2.51.0