Re: Re: [PATCH v11 2/2] PCI: eic7700: Add Eswin PCIe host controller driver

[zhangsenchuan]

> > > > > On Fri, Feb 27, 2026 at 07:18:08PM +0800, zhangsenchuan@xxxxxxxxxxxxxxxxxx wrote:
> > > > > > From: Senchuan Zhang <zhangsenchuan@xxxxxxxxxxxxxxxxxx>
> > > > > > 
> > > > > > Add driver for the Eswin EIC7700 PCIe host controller, which is based on
> > > > > > the DesignWare PCIe core, IP revision 5.96a. The PCIe Gen.3 controller
> > > > > > supports a data rate of 8 GT/s and 4 channels, support INTx and MSI
> > > > > > interrupts.
> > > > > > 
> > > > > 
> > > > > Is the driver going to work only for the PCIe RC IP in EIC7700 SoC or for the
> > > > > upcoming Eswin SoCs as well? Just curious because, we don't name drivers based
> > > > > on one SoC name, but by the vendor so that the driver (if compatible) can be
> > > > > used across other SoCs from the vendor.
> > > > > 
> > > > > If it can work across other SoCs, then I can change 'eic7700' to 'eswin', where
> > > > > applicable while applying.
> > > > > 
> > > > 
> > > > This PCIe RC IP in EIC7700 will only be used for EIC7700 SoC. One thing for sure
> > > > is our next SoC will use a higher IP revision of the DesignWare PCIe core.
> > > > In the future, there is no doubt that the use of IP from other manufacturers may
> > > > be considered.
> > > > 
> > > > Based on this, may I ask which name do you think is better, eic7700' or 'eswin'?
> > > > 
> > > 
> > > I'd suggest going with just 'eswin'. If the future revisions come up with
> > > non-dwc based IPs, we can name them appropriately.
> > > 
> > > > I found there is a commit on drivers/pci/controller/dwc/pcie-tegra194.c
> > > > It added Tegra234 PCIe support in pcie-tegra194.c
> > > > Is this naming approach no longer recommended?
> > > > 
> > > 
> > > Yes, that predates my time with host controller drivers. I strongly suggest
> > > naming the drivers based on vendors or family to avoid creating an impression
> > > that the driver only supports one SoC version.
> > > 
> > > Since you agreed for renaming, I took the liberty to do the change myself and
> > > applied the patches. I also added the maintainers entry. Please take a look at
> > > the commits and confirm if everything is OK:
> > > https://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git/log/?h=controller/dwc-eswin
> > 
> > Hi Mani,
> > 
> > Thank you very much for helping me change 'eic7700' to 'eswin'.
> > 
> > I have verified that the code functions are intact. However, there are a few areas
> > that require your assistance to incorporate and make necessary modifications. 
> > After the modifications, I believe you can incorporate it.
> > 
> 
> Done:
> https://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git/commit/?h=controller/dwc-eswin&id=cbbe59fa04b5d9f8e11138df4591653f7d2f8351
> 
> I also removed PROBE_PREFER_ASYNCHRONOUS flag since there appears to be a
> possibility of a race condition with some endpoint drivers. We will add it in
> some other form later.

Okey,thanks!

I have checked the code and everything is fine. I'm looking forward to your merge.

Kind regards,
Senchuan