Re: [PATCH 1/2] arm64: dts: qcom: monaco: add lt8713sx bridge with displayport

[Dmitry Baryshkov]

On Tue, Mar 17, 2026 at 07:40:09PM +0530, Vishnu Saini wrote:
> On Tue, Mar 17, 2026 at 12:42:24PM +0100, Krzysztof Kozlowski wrote:
> > On 17/03/2026 07:03, Vishnu Saini wrote:
> > > Monaco-evk has LT8713sx which act as DP to 3 DP output
> > > converter. Edp PHY from monaco soc is connected to lt8713sx
> > > as input and output of lt8713sx is connected to 3 mini DP ports.
> > > 
> > > Two ports are available in mainboard and one port
> > > is available on Mezz board.
> > > 
> > > lt8713sx is connected to soc over i2c0 and with reset gpio
> > > connected to pin6 of ioexpander5.
> > > 
> > > Enable the edp nodes from monaco and enable lontium lt8713sx
> > > bridge node.
> > > 
> > > Co-developed-by: Prahlad Valluru <vvalluru@xxxxxxxxxxxxxxxx>
> > > Signed-off-by: Prahlad Valluru <vvalluru@xxxxxxxxxxxxxxxx>
> > > Signed-off-by: Vishnu Saini <vishnu.saini@xxxxxxxxxxxxxxxx>
> > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
> > 
> > How v1 could be reviewed already? v1 is the first posting.
> This series was reviewed previously, https://lore.kernel.org/all/20251228-lt8713sx-bridge-linux-for-next-v3-0-3f77ad84d7d1@xxxxxxxxxxxxxxxx/
> Maintainer asked to submit a new series once dependent patches are merged.

The patches were already sent, so this should be v4 at least.


-- 
With best wishes
Dmitry