Re: [PATCH 1/2] arm64: dts: qcom: monaco: add lt8713sx bridge with displayport

[Vishnu Saini]

On Tue, Mar 17, 2026 at 04:40:51PM +0200, Dmitry Baryshkov wrote:
> On Tue, Mar 17, 2026 at 07:40:09PM +0530, Vishnu Saini wrote:
> > On Tue, Mar 17, 2026 at 12:42:24PM +0100, Krzysztof Kozlowski wrote:
> > > On 17/03/2026 07:03, Vishnu Saini wrote:
> > > > Monaco-evk has LT8713sx which act as DP to 3 DP output
> > > > converter. Edp PHY from monaco soc is connected to lt8713sx
> > > > as input and output of lt8713sx is connected to 3 mini DP ports.
> > > > 
> > > > Two ports are available in mainboard and one port
> > > > is available on Mezz board.
> > > > 
> > > > lt8713sx is connected to soc over i2c0 and with reset gpio
> > > > connected to pin6 of ioexpander5.
> > > > 
> > > > Enable the edp nodes from monaco and enable lontium lt8713sx
> > > > bridge node.
> > > > 
> > > > Co-developed-by: Prahlad Valluru <vvalluru@xxxxxxxxxxxxxxxx>
> > > > Signed-off-by: Prahlad Valluru <vvalluru@xxxxxxxxxxxxxxxx>
> > > > Signed-off-by: Vishnu Saini <vishnu.saini@xxxxxxxxxxxxxxxx>
> > > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
> > > 
> > > How v1 could be reviewed already? v1 is the first posting.
> > This series was reviewed previously, https://lore.kernel.org/all/20251228-lt8713sx-bridge-linux-for-next-v3-0-3f77ad84d7d1@xxxxxxxxxxxxxxxx/
> > Maintainer asked to submit a new series once dependent patches are merged.
> 
> The patches were already sent, so this should be v4 at least.
Sorry for the misunderstanding, i will rebase and submit v4 to previous series.
I will address review comments from this series in v4. 
> 
> -- 
> With best wishes
> Dmitry