[PATCH 12/18] arm64: dts: qcom: kaanapali: Fix PCIe wake GPIO polarity

[Krishna Chaitanya Chundru]

The PCIe WAKE# signal is active-low as defined in the PCIe Base
Specification. Fix the wake-gpios polarity by using GPIO_ACTIVE_LOW
instead of GPIO_ACTIVE_HIGH.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/kaanapali-mtp.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
index 07247dc98b70..dc773da863c0 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
@@ -933,7 +933,7 @@ &pcie0_phy {
 };
 
 &pcie_port0 {
-	wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 104 GPIO_ACTIVE_LOW>;
 	reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
 
 	wifi@0 {

-- 
2.34.1