Re: [PATCH v3 1/2] dt-bindings: iio: dac: Add AD5529R

[Conor Dooley]

On Fri, May 22, 2026 at 06:02:07PM +0100, Jonathan Cameron wrote:
> On Tue, 19 May 2026 17:42:58 +0200
> Janani Sunil <janani.sunil@xxxxxxxxxx> wrote:
> 
> > Devicetree bindings for AD5529R 16 channel 12/16 bit high voltage,
> > buffered voltage output digital-to-analog converter (DAC) with an
> > integrated precision reference.
> 
> Note that I'm seeing this as Changes Requested in the DT-binding patchwork
> but didn't see any replies.
> 
> Seems I didn't get the sashiko reply - nor did the IIO patchwork.
> Hopefully Janani did!
> https://patchwork.kernel.org/project/devicetree/patch/20260519-ad5529r-driver-v3-1-267c0731aa68@xxxxxxxxxx/

The sashiko stuff is per subsystem or something, so dt stuff only goes
to us and the submitters. I think that's kinda stupid but also probably
required to avoid pissing people off. There's quite a bit of noise
generated by it, especially with it repeating the same incorrect stuff
on every version.

> 
> > 
> > Signed-off-by: Janani Sunil <janani.sunil@xxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/iio/dac/adi,ad5529r.yaml   | 217 +++++++++++++++++++++
> >  MAINTAINERS                                        |   7 +
> >  2 files changed, 224 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5529r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5529r.yaml
> > new file mode 100644
> > index 000000000000..eb66f6ca063d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5529r.yaml
> > @@ -0,0 +1,217 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/dac/adi,ad5529r.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Analog Devices AD5529R 16-Channel 12/16-bit High Voltage DAC
> > +
> > +maintainers:
> > +  - Janani Sunil <janani.sunil@xxxxxxxxxx>
> > +
> > +description: |
> > +  The AD5529R is a 16-channel, 12-bit or 16-bit, high voltage, buffered voltage output
> 
> Long line. Check the wrap.
> 
> > +  digital-to-analog converter (DAC) with an integrated precision reference.
> > +  The device operates from unipolar and bipolar supplies. It is guaranteed
> > +  monotonic and has built-in rail-to-rail output buffers that can source or
> > +  sink up to 25mA.
> > +
> > +  Specifications:
> > +  * 16 independent 12-bit or 16-bit DAC channels
> > +  * Independently programmable output ranges: 0V to 5V, 0V to 10V, 0V to 20V,
> > +    0V to 40V, ±5V, ±10V, ±15V, and ±20V
> > +  * The device supports SPI communication with Mode 0 and Mode 3.
> > +  * 4.096V precision reference, 12ppm/°C maximum
> > +  * Built-in function generation: Toggle, Sinusoidal Dither, and Ramp waveforms
> > +  * Multiplexer for output voltage, load current sense and die temperature
> > +
> > +  Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad5529r.pdf
> > +
> 
> > +patternProperties:
> > +  "^channel@([0-9]|1[0-5])$":
> 
> Sashiko commented that this should be hex.  Why the forcing to decimal?
>

Attachment: signature.asc
Description: PGP signature