[PATCH v2 2/3] soc: qcom: spm: Add MSM8960 SAW2 CPU support

[Rudraksha Gupta via B4 Relay]

From: Rudraksha Gupta <guptarud@xxxxxxxxx>

The MSM8960 uses SAW2 v1.1, the same hardware version as the APQ8064.
Add SPM register data so that the SAW2 driver can program the correct
SPM sequences and PMIC parameters for MSM8960 CPUs.

Link: https://github.com/CyanogenMod/android_kernel_samsung_d2/blob/0dbe2b56847b304d30b809dfd08ba3b4a61d9af8/arch/arm/mach-msm/board-express.c#L3265-L3285
Link: https://github.com/CyanogenMod/android_kernel_samsung_d2/blob/0dbe2b56847b304d30b809dfd08ba3b4a61d9af8/arch/arm/mach-msm/board-express.c#L3353-L3381
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Rudraksha Gupta <guptarud@xxxxxxxxx>
---
 drivers/soc/qcom/spm.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
index f75659fff287..fb3ec8aa42b0 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -233,7 +233,7 @@ static const u16 spm_reg_offset_v1_1[SPM_REG_NR] = {
 
 static void smp_set_vdd_v1_1(void *data);
 
-/* SPM register data for 8064 */
+/* SPM register data for 8064, 8960 */
 static struct linear_range spm_v1_1_regulator_range =
 	REGULATOR_LINEAR_RANGE(700000, 0, 56, 12500);
 
@@ -253,6 +253,22 @@ static const struct spm_reg_data spm_reg_8064_cpu = {
 	.ramp_delay = 1250,
 };
 
+static const struct spm_reg_data spm_reg_8960_cpu = {
+	.reg_offset = spm_reg_offset_v1_1,
+	.spm_cfg = 0x1f,
+	.pmic_dly = 0x03020004,
+	.pmic_data[0] = 0x0084009c,
+	.pmic_data[1] = 0x00a4001c,
+	.seq = { 0x03, 0x0f, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01,
+		0x10, 0x54, 0x30, 0x0c, 0x24, 0x30, 0x0f },
+	.start_index[PM_SLEEP_MODE_STBY] = 0,
+	.start_index[PM_SLEEP_MODE_SPC] = 2,
+	.set_vdd = smp_set_vdd_v1_1,
+	.range = &spm_v1_1_regulator_range,
+	.init_uV = 1300000,
+	.ramp_delay = 1250,
+};
+
 static inline void spm_register_write(struct spm_driver_data *drv,
 					enum spm_reg reg, u32 val)
 {
@@ -501,6 +517,8 @@ static const struct of_device_id spm_match_table[] = {
 	  .data = &spm_reg_8974_8084_cpu },
 	{ .compatible = "qcom,apq8064-saw2-v1.1-cpu",
 	  .data = &spm_reg_8064_cpu },
+	{ .compatible = "qcom,msm8960-saw2-cpu",
+	  .data = &spm_reg_8960_cpu },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, spm_match_table);

-- 
2.54.0