[PATCH v2 04/10] arm64: dts: qcom: shikra: Add DDR BWMON support

[Komal Bajaj]

From: Sayantan Chakraborty <sayantan.chakraborty@xxxxxxxxxxxxxxxx>

Add CPU-to-DDR BWMON nodes and their corresponding opp tables for
Shikra SoC. This is necessary to enable power management and optimize
system performance from the perspective of dynamically changing DDR
frequencies.

Signed-off-by: Sayantan Chakraborty <sayantan.chakraborty@xxxxxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
Signed-off-by: Komal Bajaj <komal.bajaj@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/shikra.dtsi | 40 ++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index 2751b4f89678..3cdabe718714 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -661,6 +661,46 @@ rclk-pins {
 			};
 		};
 
+		pmu@c91000 {
+			compatible = "qcom,shikra-cpu-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0x0 0x00c91000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			interconnects = <&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+					 &mc_virt SLAVE_EBI_CH0 RPM_ACTIVE_TAG>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <1200000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2188000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <3072000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <4068000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <6220000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <7216000>;
+				};
+			};
+		};
+
 		mem_noc: interconnect@d00000 {
 			compatible = "qcom,shikra-mem-noc-core";
 			reg = <0x0 0x00d00000 0x0 0x43080>;

-- 
2.34.1