[PATCH v5 06/14] arm64: dts: imx8mp-var-som-symphony: enable PCIe

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@xxxxxxxxxxxxx>

Add the PCIe reference clock and enable the PCIe controller and PHY on
the Symphony carrier board.

Describe the PERST# reset GPIO and configure the PHY to use an external
reference clock input.

Signed-off-by: Stefano Radaelli <stefano.r@xxxxxxxxxxxxx>
---
v4->v5:
 - 

v3->v4:
 - Add pcie reset-gpios instead of deprecated one

v2->v3:
 - 

v1->v2:
 - Adjust PCIe controller configuration

 .../dts/freescale/imx8mp-var-som-symphony.dts  | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
index fdac4ceb4c19..698f02fc39a5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som-symphony.dts
@@ -48,6 +48,12 @@ led-0 {
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "VSD_3V3";
@@ -146,6 +152,18 @@ rtc@68 {
 	};
 };
 
+&pcie {
+	reset-gpios = <&pcal6408 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
-- 
2.47.3