Re: [PATCH net-next v8 01/10] enic: verify firmware supports V2 SR-IOV at probe time

[Breno Leitao]

On Tue, Jun 09, 2026 at 09:32:27AM -0700, Satish Kharat wrote:
> During PF probe, query the firmware get-supported-feature interface
> to verify that the running firmware supports V2 SR-IOV. Firmware
> version 5.3(4.72) and later report VIC_FEATURE_SRIOV via
> CMD_GET_SUPP_FEATURE_VER. If the firmware does not support the
> feature, set vf_type to ENIC_VF_TYPE_NONE and log a warning so the
> admin knows a firmware upgrade is needed.
> 
> VIC_FEATURE_SRIOV is assigned the explicit value 4 to match the
> firmware ABI.  Slot 3 (firmware's VIC_FEATURE_PTP) is reserved with
> a comment rather than a placeholder enum entry, since PTP is not
> used by the upstream driver.
> 
> Suggested-by: Breno Leitao <leitao@xxxxxxxxxx>
> Signed-off-by: Satish Kharat <satishkh@xxxxxxxxx>
> ---
>  drivers/net/ethernet/cisco/enic/enic_main.c   | 21 ++++++++++++++++++++-
>  drivers/net/ethernet/cisco/enic/vnic_devcmd.h |  2 ++
>  2 files changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
> index e7125b818087..53d68272d06a 100644
> --- a/drivers/net/ethernet/cisco/enic/enic_main.c
> +++ b/drivers/net/ethernet/cisco/enic/enic_main.c
> @@ -2641,8 +2641,10 @@ static void enic_iounmap(struct enic *enic)
>  static void enic_sriov_detect_vf_type(struct enic *enic)
>  {
>  	struct pci_dev *pdev = enic->pdev;
> -	int pos;
> +	u64 supported_versions, a1 = 0;
>  	u16 vf_dev_id;
> +	int pos;
> +	int err;
>  
>  	if (enic_is_sriov_vf(enic) || enic_is_dynamic(enic))
>  		return;
> @@ -2669,6 +2671,23 @@ static void enic_sriov_detect_vf_type(struct enic *enic)
>  		enic->vf_type = ENIC_VF_TYPE_NONE;
>  		break;
>  	}
> +
> +	if (enic->vf_type != ENIC_VF_TYPE_V2)

Can we get here with SR-IOV enabled? Then we want to disable it on
failure.