Re: [net-next v6 0/3] Add motorcomm 8531s set ds func and 8522 driver

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:

On Fri,  5 Jun 2026 14:02:09 +0800 you wrote:
> This patch is for Starfive JHB100 EVB board. JHB100  contain
> 1 RGMII/RMII and 1 RMII synopsys GMAC cores. In the EVB board, RGMII
> interface connect with YT8531s Ethernet PHY. RMII interface connect
> with YT8522 ethernet PHY. So patch 1-2 is for RGMII interface
> patch 3 is RMII is for RMII interface.
> 
> JHB100 is a Starfive new RISC-V SoC for datacenter BMC (BaseBoard
> Managent Controller). Similar with Aspeed 27x0.
> 
> [...]

Here is the summary with links:
  - [net-next,v6,1/3] net: phy: motorcomm: move mdio lock out from yt8531_set_ds()
    https://git.kernel.org/netdev/net-next/c/0bfd6c8c959d
  - [net-next,v6,2/3] net: motorcomm: phy: set drive strength in YT8531s RGMII
    https://git.kernel.org/netdev/net-next/c/284975d609d0
  - [net-next,v6,3/3] net: phy: motorcomm: Add YT8522 100M RMII PHY support
    https://git.kernel.org/netdev/net-next/c/554cfeb72e09

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html