Re: [PATCH v2] HID: nintendo: add support for HORI Wireless Switch Pad

[Jiri Kosina]

On Wed, 27 May 2026, Hector Zelaya wrote:

> Add support for the HORI Wireless Switch Pad (vendor 0x0f0d, product
> 0x00f6), a licensed third-party Nintendo Switch Pro Controller.
> 
> The controller reports controller type 0x06 (vs 0x03 for first-party
> Pro Controllers) and has the following quirks:
> 
>  - SPI flash calibration data is incompatible; use default stick
>    calibration values instead.
>  - X and Y button bits are swapped compared to first-party controllers;
>    add a dedicated button mapping table.
>  - Rumble and IMU enable may timeout (no vibration motor in hardware);
>    treat as non-fatal for licensed controllers.
> 
> Tested over Bluetooth on NixOS with kernel 7.0.5 and 7.0.10:
>  - All 14 buttons map correctly
>  - Player LED sets on connect
>  - Sticks report correctly with default calibration
>  - IMU/gyro data streams at 60Hz
>  - D-pad reports on ABS_HAT0X/HAT0Y
> 
> Device information:
>   Bluetooth name: Lic Pro Controller
>   Bluetooth HID:  0005:0F0D:00F6
> 
> Assisted-by: Kiro:Auto [Amazon Kiro IDE]
> Signed-off-by: Hector Zelaya <hector@xxxxxxxxxxxxxxxx>
> Reviewed-by: Joshua Peisach <jpeisach@xxxxxxxxxx>

Applied, thanks.

-- 
Jiri Kosina
SUSE Labs