[PATCH v7 4/6] scsi: add BLIST_NO_LUN_1F blacklist flag

[Phil Pemberton]

Some multi-LUN devices respond to INQUIRY on unpopulated LUNs with
PQ=0 / PDT=0x1f instead of the standard PQ=3.  The SCSI scan layer
normally adds such devices (PQ=0 means "connected"), producing
spurious "No Device" entries.

The scsi_target field pdt_1f_for_no_lun already exists to suppress
this, but was previously only set by the USB UFI driver.

Add BLIST_NO_LUN_1F so the flag can be set per-device from
scsi_devinfo, and wire it up in scsi_probe_and_add_lun() to set
starget->pdt_1f_for_no_lun from the blacklist flags.  This is placed
immediately before the PDT=0x1f check so it takes effect for all LUNs,
including LUN 0, without waiting for scsi_add_lun() to run.

Reviewed-by: Hannes Reinecke <hare@xxxxxxxxxx>
Signed-off-by: Phil Pemberton <philpem@xxxxxxxxxxxxx>
---
 drivers/scsi/scsi_scan.c    | 3 +++
 include/scsi/scsi_devinfo.h | 6 +++---
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index ef22a4228b85..ef0f5ee6be87 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1285,6 +1285,9 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
 	 * PDT=00h Direct-access device (floppy)
 	 * PDT=1Fh none (no FDD connected to the requested logical unit)
 	 */
+	if (bflags & BLIST_NO_LUN_1F)
+		starget->pdt_1f_for_no_lun = 1;
+
 	if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
 	    (result[0] & 0x1f) == 0x1f &&
 	    !scsi_is_wlun(lun)) {
diff --git a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h
index 1d79a3b536ce..6957b0705510 100644
--- a/include/scsi/scsi_devinfo.h
+++ b/include/scsi/scsi_devinfo.h
@@ -34,7 +34,8 @@
 #define BLIST_NOSTARTONADD	((__force blist_flags_t)(1ULL << 12))
 /* do not ask for VPD page size first on some broken targets */
 #define BLIST_NO_VPD_SIZE	((__force blist_flags_t)(1ULL << 13))
-#define __BLIST_UNUSED_14	((__force blist_flags_t)(1ULL << 14))
+/* PDT 0x1f with PQ 0 means no LUN present (e.g. some ATAPI multi-LUN) */
+#define BLIST_NO_LUN_1F		((__force blist_flags_t)(1ULL << 14))
 #define __BLIST_UNUSED_15	((__force blist_flags_t)(1ULL << 15))
 #define __BLIST_UNUSED_16	((__force blist_flags_t)(1ULL << 16))
 /* try REPORT_LUNS even for SCSI-2 devs (if HBA supports more than 8 LUNs) */
@@ -77,8 +78,7 @@
 #define __BLIST_HIGH_UNUSED (~(__BLIST_LAST_USED | \
 			       (__force blist_flags_t) \
 			       ((__force __u64)__BLIST_LAST_USED - 1ULL)))
-#define __BLIST_UNUSED_MASK (__BLIST_UNUSED_14 | \
-			     __BLIST_UNUSED_15 | \
+#define __BLIST_UNUSED_MASK (__BLIST_UNUSED_15 | \
 			     __BLIST_UNUSED_16 | \
 			     __BLIST_UNUSED_24 | \
 			     __BLIST_UNUSED_27 | \
-- 
2.43.0