[PATCH v3] media: bcm2835-unicam: Fix log status runtime access

[Eugen Hristev]

When requesting log status, the block might be powered off, but registers
are being read.
Avoid reading the registers if the device is not resumed, thus also avoid
powering up the device just for log status.

Fixes: 392cd78d495f ("media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface")
Signed-off-by: Eugen Hristev <ehristev@xxxxxxxxxx>
---
Changes in v3:
- Changed to check return value of pm_runtime_get_if_active() and only call
  pm_runtime_put() if the device is active.
- Link to v2: https://patch.msgid.link/20260522-bcmpipm-v2-1-a3da66cbc9f0@xxxxxxxxxx

Changes in v2:
- changed to use pm_runtime_get_if_active()
- add corresponding put()
- Link to v1: https://patch.msgid.link/20260521-bcmpipm-v1-1-3eba88d88045@xxxxxxxxxx

To: Raspberry Pi Kernel Maintenance <kernel-list@xxxxxxxxxxxxxxx>
To: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
To: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
To: Ray Jui <rjui@xxxxxxxxxxxx>
To: Scott Branden <sbranden@xxxxxxxxxxxx>
To: Broadcom internal kernel review list <bcm-kernel-feedback-list@xxxxxxxxxxxx>
To: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
To: Jean-Michel Hautbois <jeanmichel.hautbois@xxxxxxxxxx>
To: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
To: Hans Verkuil <hverkuil@xxxxxxxxxx>
To: Naushir Patuck <naush@xxxxxxxxxxxxxxx>
Cc: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Cc: linux-media@xxxxxxxxxxxxxxx
Cc: linux-rpi-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
 drivers/media/platform/broadcom/bcm2835-unicam.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/media/platform/broadcom/bcm2835-unicam.c b/drivers/media/platform/broadcom/bcm2835-unicam.c
index 8d28ba0b59a3..96b51e29bba4 100644
--- a/drivers/media/platform/broadcom/bcm2835-unicam.c
+++ b/drivers/media/platform/broadcom/bcm2835-unicam.c
@@ -2043,6 +2043,7 @@ static int unicam_log_status(struct file *file, void *fh)
 	struct unicam_node *node = video_drvdata(file);
 	struct unicam_device *unicam = node->dev;
 	u32 reg;
+	int pm_active;
 
 	/* status for sub devices */
 	v4l2_device_call_all(&unicam->v4l2_dev, 0, core, log_status);
@@ -2052,6 +2053,14 @@ static int unicam_log_status(struct file *file, void *fh)
 		 node->fmt.fmt.pix.width, node->fmt.fmt.pix.height);
 	dev_info(unicam->dev, "V4L2 format:         %08x\n",
 		 node->fmt.fmt.pix.pixelformat);
+
+	pm_active = pm_runtime_get_if_active(unicam->dev);
+	if (!pm_active) {
+		dev_info(unicam->dev,
+			 "Live data N/A due to device inactive\n");
+		return 0;
+	}
+
 	reg = unicam_reg_read(unicam, UNICAM_IPIPE);
 	dev_info(unicam->dev, "Unpacking/packing:   %u / %u\n",
 		 unicam_get_field(reg, UNICAM_PUM_MASK),
@@ -2065,6 +2074,9 @@ static int unicam_log_status(struct file *file, void *fh)
 	dev_info(unicam->dev, "Write pointer:       %08x\n",
 		 unicam_reg_read(unicam, UNICAM_IBWP));
 
+	if (pm_active == 1)
+		pm_runtime_put(unicam->dev);
+
 	return 0;
 }
 

---
base-commit: e98d21c170b01ddef366f023bbfcf6b31509fa83
change-id: 20260521-bcmpipm-6c578e73239c

Best regards,
--  
Eugen Hristev <ehristev@xxxxxxxxxx>