[PATCH] arm64: dts: qcom: shikra: Add BAM-DMUX support

[Vishnu Santhosh]

Add required nodes to enable the upstream BAM-DMUX WWAN driver on
Qualcomm Shikra SoC.

The SMSM (Shared Memory State Machine) node provides the power
control signaling between the AP and modem for BAM-DMUX. The
BAM DMA controller node describes the A2 modem BAM hardware as a
standard DMA controller. The BAM-DMUX node references the DMA
channels and the pc/pc-ack interrupt lines from the modem SMSM
entry for power control signaling.

Signed-off-by: Vishnu Santhosh <vishnu.santhosh@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/shikra.dtsi | 51 ++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index a4334d99c1f35ee851ca8266ec37d4a200a07ee5..3e59d5f6323c0d857f376316faa26c503e67f6bc 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -17,6 +17,23 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	bam_dmux: bam-dmux {
+		compatible = "qcom,bam-dmux";
+
+		interrupts-extended = <&modem_smsm 1 IRQ_TYPE_EDGE_BOTH>,
+				      <&modem_smsm 11 IRQ_TYPE_EDGE_BOTH>;
+		interrupt-names = "pc",
+				  "pc-ack";
+
+		qcom,smem-states = <&apps_smsm 1>,
+				   <&apps_smsm 11>;
+		qcom,smem-state-names = "pc",
+					"pc-ack";
+
+		dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+		dma-names = "tx", "rx";
+	};
+
 	clocks {
 		xo_board: xo-board {
 			compatible = "fixed-clock";
@@ -314,6 +331,28 @@ lmcu_dtb_mem: lmcu-dtb@b4702000 {
 		};
 	};
 
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mboxes = <0>, <&apcs_glb 13>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_EDGE_RISING 0>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 
@@ -640,6 +679,18 @@ &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
 			};
 		};
 
+		bam_dmux_dma: dma-controller@6044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x06044000 0x0 0x19000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING 0>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+		};
+
 		sram@c11e000 {
 			compatible = "qcom,shikra-imem", "mmio-sram";
 			reg = <0x0 0x0c11e000 0x0 0x1000>;

---
base-commit: ba3e43a9e601636f5edb54e259a74f96ca3b8fd8
change-id: 20260603-qcom-shikra-dts-bam-dmux-7fdcbb6fb662
prerequisite-message-id: <20260527-shikra-dt-v4-0-b5ca1fa0b392@xxxxxxxxxxxxxxxx>
prerequisite-patch-id: 3a689e8dda5fd2755b689d94d095806b3f2e6eed
prerequisite-patch-id: 2acc300a68ed8c5364fb5f2f7d28fc0d56ab07bf
prerequisite-patch-id: 2357cac636e019eaf14d6a493a1c72bca56fe405
prerequisite-patch-id: 2885f299e711582da312ca9d13983d296a3dd5dc
prerequisite-patch-id: 91af5f3c01e766a53ce8de69aa21847a2d6bbbf8

Best regards,
-- 
Vishnu Santhosh <vishnu.santhosh@xxxxxxxxxxxxxxxx>