[PATCH 2/4] arm64: dts: qcom: pm8005: Add temp alarm node

[Jishnu Prakash]

Add temperature alarm node, used for PMIC thermal mitigation.

Co-developed-by: Rakesh Kota <rakesh.kota@xxxxxxxxxxxxxxxx>
Signed-off-by: Rakesh Kota <rakesh.kota@xxxxxxxxxxxxxxxx>
Signed-off-by: Jishnu Prakash <jishnu.prakash@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pm8005.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
index 0f0ab2da8305..180809a0ee73 100644
--- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
@@ -11,6 +11,14 @@ pm8005_lsid0: pmic@4 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8005_tz: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
 		pm8005_gpios: gpio@c000 {
 			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;

-- 
2.43.0