Re: [PATCH v3 8/8] arm64: dts: freescale: imx95: Add NXP neoisp device tree node

[Francesco Dolcini]

Hello Antoine,
thanks for your patch.

On Fri, Jun 12, 2026 at 03:20:39PM +0200, Antoine Bouyer wrote:
> Add neoisp device tree node to imx95.dtsi and enable it by default in
> 19x19 evk board.
> 
> Signed-off-by: Antoine Bouyer <antoine.bouyer@xxxxxxx>

...

> diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
> index d6c549c16047..5543a6cb1250 100644
> --- a/arch/arm64/boot/dts/freescale/imx95.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
> @@ -1867,6 +1867,17 @@ pmu@49252000 {
>  			};
>  		};
>  
> +		neoisp0: isp@4ae00000 {
> +			compatible = "nxp,imx95-neoisp";
> +			reg = <0x0 0x4ae00000 0x0 0x8000>,
> +			      <0x0 0x4afe0000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&scmi_clk IMX95_CLK_CAMCM0>;
> +			clock-names = "camcm0";
> +			power-domains = <&scmi_devpd IMX95_PD_CAMERA>;
> +			status = "disabled";
> +		};

Why the node is disabled?  If the node is wholly described in
imx95.dtsi, it should be enabled.

Francesco