Re: [PATCH 1/3] iio: common: st_sensors: honour channel endianness in read_axis_data
From: Jonathan Cameron
Date: Sun Jun 14 2026 - 14:39:30 EST
On Fri, 5 Jun 2026 12:08:41 +0200
Herman van Hazendonk <github.com@xxxxxxxxxx> wrote:
> st_sensors_read_axis_data() unconditionally decoded multi-byte
> results with get_unaligned_le16() / get_unaligned_le24() regardless
> of the channel's declared scan_type.endianness.
>
> For every ST sensor that has used this helper since it was introduced
> this happened to be fine because the ST IMU/accel/gyro/pressure
> families publish their data registers as little-endian and the
> channel specs in those drivers declare IIO_LE accordingly.
>
> The LSM303DLH magnetometer however publishes its X/Y/Z output as a
> pair of big-endian bytes (the H register sits at the lower address,
> 0x03/0x05/0x07, and the L register immediately after), and its
> channel specs in st_magn_core.c correctly declare IIO_BE -- but
> read_axis_data() ignored that and decoded as little-endian, swapping
> the high and low bytes of every magnetometer sample.
>
> The bug is most visible on a stationary chip: in earth's field the
> true X reading is small and the high byte sits at 0x00, so swapping
> the bytes pins sysfs X at exactly the low byte's pattern (e.g. 0x00F0
> = 240). Y and Z still appear "to vary" because their magnitudes are
> larger and the noise in the low byte produces big swings in the
> swapped high byte:
>
> before (chip flat, sysfs in_magn_*_raw):
> X=240 (stuck), Y= 12032..23296, Z=-16128..-9728
>
> after (direct i2c-dev big-endian decode, same chip same orientation):
> X≈-4096, Y≈210, Z≈80 (sensible values reflecting earth's
> ambient field at low gauss range)
>
> Fix read_axis_data() to dispatch on ch->scan_type.endianness and
> call get_unaligned_be16() / get_unaligned_be24() when the channel
> declares IIO_BE. Existing IIO_LE consumers (st_accel, st_gyro,
> st_pressure, st_lsm6dsx and others) are unaffected because their
> channel specs already declare IIO_LE and the LE path is unchanged.
>
Hi Herman,
Fixes tag please. We want to know how far to backport and provide
info to those trying to work out if the bug affects their kernel
trees.
Thanks
Jonathan
> Signed-off-by: Herman van Hazendonk <github.com@xxxxxxxxxx>