Re: [PATCH] Input: goodix - clamp the device-reported contact count

From: Dmitry Torokhov

Date: Sun Jun 14 2026 - 17:03:13 EST


On Sun, Jun 14, 2026 at 01:44:07PM +0200, Hans de Goede wrote:
> Hi,
>
> On 13-Jun-26 04:10, Bryam Vargas via B4 Relay wrote:
> > From: Bryam Vargas <hexlabsecurity@xxxxxxxxx>
> >
> > goodix_ts_read_input_report() copies the number of touch points reported
> > by the device into an on-stack buffer
> >
> > u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
> >
> > which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only
> > runtime check bounds the per-interrupt count against ts->max_touch_num,
> > but that value is taken verbatim from a 4-bit field of the device
> > configuration block and is never clamped:
> >
> > ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
> >
> > The nibble can be 0..15, so a malfunctioning, malicious or counterfeit
> > controller (or an attacker tampering with the I2C bus) can advertise up
> > to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num
> > of up to 15 and the second goodix_i2c_read() writes
> > ts->contact_size * (touch_num - 1) bytes past the one-contact header into
> > point_data - up to 30 bytes (45 with the 9-byte report format) beyond the
> > 92-byte buffer: a stack out-of-bounds write.
> >
> > Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts
> > point_data[] is sized for, when reading it from the configuration.
> >
> > Fixes: a7ac7c95d468 ("Input: goodix - use max touch number from device config")
> > Cc: stable@xxxxxxxxxxxxxxx
> > Signed-off-by: Bryam Vargas <hexlabsecurity@xxxxxxxxx>
>
> Thanks, patch looks good to me:
>
> Reviewed-by: Hans de Goede <johannes.goede@xxxxxxxxxxxxxxxx>
>
> Regards,
>
> Hans
>
>
> > ---
> > drivers/input/touchscreen/goodix.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
> > index f8798d11ec03..17fcfe45988c 100644
> > --- a/drivers/input/touchscreen/goodix.c
> > +++ b/drivers/input/touchscreen/goodix.c
> > @@ -1057,7 +1057,8 @@ static void goodix_read_config(struct goodix_ts_data *ts)
> > }
> >
> > ts->int_trigger_type = ts->config[TRIGGER_LOC] & 0x03;
> > - ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
> > + ts->max_touch_num = min(ts->config[MAX_CONTACTS_LOC] & 0x0f,
> > + GOODIX_MAX_CONTACTS);

Should we drop the report if is has bogus data in it?

Thanks.

--
Dmitry