Re: [PATCH v2 2/2] pinctrl: upboard: add device id INTC1055 based UP boards support

[Thomas Richard]

On 6/15/26 1:23 PM, GaryWang wrote:
> On Mon, 15 Jun 2026 at 17:37, Thomas Richard <thomas.richard@xxxxxxxxxxx> wrote:
>>
>> Gary,
>>
>> On 6/15/26 10:01 AM, Thomas Richard wrote:
>>> Hello Gary,
>>>
>>> On 6/12/26 12:13 PM, GaryWang wrote:
>>>> Add support "UP Xtreme i12", "UP Squared Pro 7000", "UP Squared i12",
>>>>  "UP 7000" boards and I2C/PWM/UART/SPI pins mapping data.
>>>>
>>> Reviewed-by: Thomas Richard <thomas.richard@xxxxxxxxxxx>
>>>
>>> Best Regards,
>>> Thomas
>>
>> I did test your series on UP Squared Pro 7000 and pinctrl driver does
>> not probe. Pinctrl device INTC1055:00 does not exist on this board.
>>
>> [   12.818773] upboard-pinctrl upboard-pinctrl: unknown pinctrl device
>> INTC1055:00 in map entry, deferring probe
>> [   12.818795] upboard-pinctrl upboard-pinctrl: error -EPROBE_DEFER:
>> Failed to select pinctrl
>> [   12.818801] upboard-pinctrl upboard-pinctrl: Driver upboard-pinctrl
>> requests probe deferral
>> [   12.818834] platform upboard-pinctrl: Added to deferred list
>> [   12.818894] platform upboard-pinctrl: deferred probe pending:
>> upboard-pinctrl: Failed to select pinctrl
>>
>> Did you test your series on all boards?
>>
> Let me know your BIOS version, we;ll check internally, thanks.
So I tested all boards of the series. It is okay for "UP Xtreme i12" and
"UP Squared i12".

For "UP 7000" and "UP Squared Pro 7000" I have the same error,
INTC1055:00 does not exist. Pinctrl device is INTC1057:00.
Please find BIOS version for both boards below.

UP 7000:
# cat /sys/devices/virtual/dmi/id/bios_version
UPASAM10
# cat /sys/devices/virtual/dmi/id/bios_release
5.26
# cat /sys/devices/virtual/dmi/id/bios_date
04/23/2024

UP Squared Pro 7000:
# cat /sys/devices/virtual/dmi/id/bios_version
UNADAM21
# cat /sys/devices/virtual/dmi/id/bios_release
5.26
# cat /sys/devices/virtual/dmi/id/bios_date
04/18/2023

Best Regards,
Thomas