[PATCH] EDAC/altera: use SDMMC compatibles to select A10/S10 IRQ layout

[AZ9tumas]

The SDMMC ECC IRQ layout selection uses CONFIG_64BIT to distinguish
between Arria10 and Stratix10 paths. This is architecture-based,
while the interrupt layout is a hardware property described by DT
compatible strings.

Select the SDMMC IRQ layout via of_device_is_compatible() checks
for altr,socfpga-s10-sdmmc-ecc in both altr_portb_setup() and
altr_edac_a10_device_add().

This keeps the existing behavior for both SoCs while making the
selection mechanism hardware-descriptive.

Signed-off-by: AZ9tumas <rounakdas2025@xxxxxxxxx>
---
 drivers/edac/altera_edac.c | 105 +++++++++++++++++++------------------
 1 file changed, 53 insertions(+), 52 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 4edd2088c2db6..161331ef57c01 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1548,15 +1548,16 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 
 	/*
 	 * Update the PortB IRQs - A10 has 4, S10 has 2, Index accordingly
-	 *
-	 * FIXME: Instead of ifdefs with different architectures the driver
-	 *        should properly use compatibles.
 	 */
-#ifdef CONFIG_64BIT
-	altdev->sb_irq = irq_of_parse_and_map(np, 1);
-#else
-	altdev->sb_irq = irq_of_parse_and_map(np, 2);
-#endif
+
+	/* Using compatibles to determine the IRQ Index */
+	bool is_s10_sdmmc = of_device_is_compatible(np, "altr,socfpga-s10-sdmmc-ecc");
+
+	if (is_s10_sdmmc)
+		altdev->sb_irq = irq_of_parse_and_map(np, 1);
+	else
+		altdev->sb_irq = irq_of_parse_and_map(np, 2);
+
 	if (!altdev->sb_irq) {
 		edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB SBIRQ alloc\n");
 		rc = -ENODEV;
@@ -1570,29 +1571,29 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 		goto err_release_group_1;
 	}
 
-#ifdef CONFIG_64BIT
-	/* Use IRQ to determine SError origin instead of assigning IRQ */
-	rc = of_property_read_u32_index(np, "interrupts", 1, &altdev->db_irq);
-	if (rc) {
-		edac_printk(KERN_ERR, EDAC_DEVICE,
-			    "Error PortB DBIRQ alloc\n");
-		goto err_release_group_1;
-	}
-#else
-	altdev->db_irq = irq_of_parse_and_map(np, 3);
-	if (!altdev->db_irq) {
-		edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
-		rc = -ENODEV;
-		goto err_release_group_1;
-	}
-	rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
-			      prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
-			      ecc_name, altdev);
-	if (rc) {
-		edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
-		goto err_release_group_1;
+	if (is_s10_sdmmc) {
+		/* Use IRQ to determine SError origin instead of assigning IRQ */
+		rc = of_property_read_u32_index(np, "interrupts", 1, &altdev->db_irq);
+		if (rc) {
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+					"Error PortB DBIRQ alloc\n");
+			goto err_release_group_1;
+		}
+	} else {
+		altdev->db_irq = irq_of_parse_and_map(np, 3);
+		if (!altdev->db_irq) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
+			rc = -ENODEV;
+			goto err_release_group_1;
+		}
+		rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
+					prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
+					ecc_name, altdev);
+		if (rc) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
+			goto err_release_group_1;
+		}
 	}
-#endif
 
 	rc = edac_device_add_device(dci);
 	if (rc) {
@@ -1974,29 +1975,29 @@ static int altr_edac_a10_device_add(struct altr_arria10_edac *edac,
 		goto err_release_group1;
 	}
 
-#ifdef CONFIG_64BIT
-	/* Use IRQ to determine SError origin instead of assigning IRQ */
-	rc = of_property_read_u32_index(np, "interrupts", 0, &altdev->db_irq);
-	if (rc) {
-		edac_printk(KERN_ERR, EDAC_DEVICE,
-			    "Unable to parse DB IRQ index\n");
-		goto err_release_group1;
-	}
-#else
-	altdev->db_irq = irq_of_parse_and_map(np, 1);
-	if (!altdev->db_irq) {
-		edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n");
-		rc = -ENODEV;
-		goto err_release_group1;
-	}
-	rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler,
-			      IRQF_TRIGGER_HIGH,
-			      ecc_name, altdev);
-	if (rc) {
-		edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n");
-		goto err_release_group1;
+	if (of_device_is_compatible(np, "altr,socfpga-s10-sdmmc-ecc")) {
+		/* Use IRQ to determine SError origin instead of assigning IRQ */
+		rc = of_property_read_u32_index(np, "interrupts", 0, &altdev->db_irq);
+		if (rc) {
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+					"Unable to parse DB IRQ index\n");
+			goto err_release_group1;
+		}
+	} else {
+		altdev->db_irq = irq_of_parse_and_map(np, 1);
+		if (!altdev->db_irq) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n");
+			rc = -ENODEV;
+			goto err_release_group1;
+		}
+		rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler,
+					IRQF_TRIGGER_HIGH,
+					ecc_name, altdev);
+		if (rc) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n");
+			goto err_release_group1;
+		}
 	}
-#endif
 
 	rc = edac_device_add_device(dci);
 	if (rc) {
-- 
2.50.1 (Apple Git-155)