[PATCH 2/4] iio: adc: add ti-ads112c14 driver
From: David Lechner (TI)
Date: Mon Jun 15 2026 - 18:04:17 EST
Add a new driver for the TI ADS112C14/ADS122C14 ADC chips.
This first step is adding a very basic driver that only supports power
on/reset and reading the system monitor channels.
ADS112C14_SYS_MON_CHANNEL_SHORT is the last channel rather than being in
logical order by address to keep the voltage channels together and in
case we find we need to add variants of this channel with different
voltage reference later.
Signed-off-by: David Lechner (TI) <dlechner@xxxxxxxxxxxx>
---
A few other notes for review that didn't seem worth putting in the
commit message:
* I intentionally did not use bulk regmap because later we may need to
get the voltage of the avdd supply.
* I left some comments in the code where the code might look funny (e.g.
to reduce future diff) or does not exactly match the datasheet, in
which case later changes will address that.
---
MAINTAINERS | 1 +
drivers/iio/adc/Kconfig | 12 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ti-ads112c14.c | 536 +++++++++++++++++++++++++++++++++++++++++
4 files changed, 550 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9ce7c61b0c14..084146a0f01e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -26916,6 +26916,7 @@ M: David Lechner <dlechner@xxxxxxxxxxxx>
L: linux-iio@xxxxxxxxxxxxxxx
S: Maintained
F: Documentation/devicetree/bindings/iio/adc/ti,ads112c14.yaml
+F: drivers/iio/adc/ti-ads112c14.c
F: include/dt-bindings/iio/adc/ti,ads112c14.h
TI ADS1018 ADC DRIVER
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 6fb0766ca27a..bfcaecc85f24 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1787,6 +1787,18 @@ config TI_ADS1119
This driver can also be built as a module. If so, the module will be
called ti-ads1119.
+config TI_ADS112C14
+ tristate "Texas Instruments ADS112C14/ADS122C14"
+ depends on I2C
+ select REGMAP
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for Texas Instruments ADS112C14,
+ ADS122C14 ADC chips.
+
+ This driver can also be built as a module. If so, the module will be
+ called ti-ads112c14.
+
config TI_ADS124S08
tristate "Texas Instruments ADS124S08"
depends on SPI
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 707dd708912f..72f4c6b33ca8 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -153,6 +153,7 @@ obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
obj-$(CONFIG_TI_ADS1018) += ti-ads1018.o
obj-$(CONFIG_TI_ADS1100) += ti-ads1100.o
obj-$(CONFIG_TI_ADS1119) += ti-ads1119.o
+obj-$(CONFIG_TI_ADS112C14) += ti-ads112c14.o
obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
obj-$(CONFIG_TI_ADS1298) += ti-ads1298.o
obj-$(CONFIG_TI_ADS131E08) += ti-ads131e08.o
diff --git a/drivers/iio/adc/ti-ads112c14.c b/drivers/iio/adc/ti-ads112c14.c
new file mode 100644
index 000000000000..97097ae2a487
--- /dev/null
+++ b/drivers/iio/adc/ti-ads112c14.c
@@ -0,0 +1,536 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * IIO driver for Texas Instruments ADS112C14 and similar ADCs.
+ *
+ * Copyright (C) 2026 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2026 Baylibre Inc.
+ *
+ * Datasheet: https://www.ti.com/lit/ds/symlink/ads122c14.pdf
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/dev_printk.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/types.h>
+#include <linux/math64.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sysfs.h>
+#include <linux/time64.h>
+#include <linux/types.h>
+#include <linux/unaligned.h>
+#include <linux/units.h>
+
+/* Datasheet t_d(RST) - time to wait after reset before next I2C use. */
+#define ADS112C14_DELAY_RESET_us 500
+
+#define ADS112C14_CMD_RDATA 0x00
+#define ADS112C14_CMD_RREG 0x40
+#define ADS112C14_CMD_WREG 0x80
+
+#define ADS112C14_REG_DEVICE_ID 0x00
+#define ADS112C14_DEVICE_ID_BITS GENMASK(3, 0)
+
+#define ADS112C14_REG_REVISION_ID 0x01
+
+#define ADS112C14_REG_STATUS_MSB 0x02
+#define ADS112C14_STATUS_MSB_RESETN BIT(7)
+#define ADS112C14_STATUS_MSB_AVDD_UVN BIT(6)
+#define ADS112C14_STATUS_MSB_REF_UVN BIT(5)
+#define ADS112C14_STATUS_MSB_REG_MAP_CRC_FAULTN BIT(3)
+#define ADS112C14_STATUS_MSB_MEM_FAULTN BIT(2)
+#define ADS112C14_STATUS_MSB_REG_WRITE_FAULTN BIT(1)
+#define ADS112C14_STATUS_MSB_DRDY BIT(0)
+
+#define ADS112C14_REG_STATUS_LSB 0x03
+#define ADS112C14_STATUS_LSB_CONV_COUNT GENMASK(7, 4)
+#define ADS112C14_STATUS_LSB_GPIO3_DAT_IN BIT(3)
+#define ADS112C14_STATUS_LSB_GPIO2_DAT_IN BIT(2)
+#define ADS112C14_STATUS_LSB_GPIO1_DAT_IN BIT(1)
+#define ADS112C14_STATUS_LSB_GPIO0_DAT_IN BIT(0)
+
+#define ADS112C14_REG_CONVERSION_CTRL 0x04
+#define ADS112C14_CONVERSION_CTRL_RESET GENMASK(7, 2)
+#define ADS112C14_CONVERSION_CTRL_START BIT(1)
+#define ADS112C14_CONVERSION_CTRL_STOP BIT(0)
+
+#define ADS112C14_REG_DEVICE_CFG 0x05
+#define ADS112C14_DEVICE_CFG_PWDN BIT(7)
+#define ADS112C14_DEVICE_CFG_STBY_MODE BIT(6)
+#define ADS112C14_DEVICE_CFG_BOCS GENMASK(5, 4)
+#define ADS112C14_DEVICE_CFG_CLK_SEL BIT(3)
+#define ADS112C14_DEVICE_CFG_CONV_MODE BIT(2)
+#define ADS112C14_DEVICE_CFG_SPEED_MODE GENMASK(1, 0)
+
+#define ADS112C14_REG_DATA_RATE_CFG 0x06
+#define ADS112C14_DATA_RATE_CFG_DELAY GENMASK(7, 4)
+#define ADS112C14_DATA_RATE_CFG_GC_EN BIT(3)
+#define ADS112C14_DATA_RATE_CFG_FLTR_OSR GENMASK(2, 0)
+
+#define ADS112C14_REG_MUX_CFG 0x07
+#define ADS112C14_MUX_CFG_AINP GENMASK(7, 4)
+#define ADS112C14_MUX_CFG_AINN GENMASK(3, 0)
+
+#define ADS112C14_REG_GAIN_CFG 0x08
+#define ADS112C14_GAIN_CFG_SPARE BIT(7)
+#define ADS112C14_GAIN_CFG_SYS_MON GENMASK(6, 4)
+#define ADS112C14_GAIN_CFG_GAIN GENMASK(3, 0)
+
+#define ADS112C14_REG_REFERENCE_CFG 0x09
+#define ADS112C14_REFERENCE_CFG_REF_UV_EN BIT(7)
+#define ADS112C14_REFERENCE_CFG_REFP_BUF_EN BIT(5)
+#define ADS112C14_REFERENCE_CFG_REFN_BUF_EN BIT(4)
+#define ADS112C14_REFERENCE_CFG_REF_VAL BIT(2)
+#define ADS112C14_REFERENCE_CFG_REF_VAL_1_25V 0
+#define ADS112C14_REFERENCE_CFG_REF_VAL_2_5V 1
+#define ADS112C14_REFERENCE_CFG_REF_SEL GENMASK(1, 0)
+
+#define ADS112C14_REG_DIGITAL_CFG 0x0A
+#define ADS112C14_DIGITAL_CFG_REG_MAP_CRC_EN BIT(6)
+#define ADS112C14_DIGITAL_CFG_I2C_CRC_EN BIT(5)
+#define ADS112C14_DIGITAL_CFG_STATUS_EN BIT(4)
+#define ADS112C14_DIGITAL_CFG_FAULT_PIN_BEHAVIOR BIT(3)
+#define ADS112C14_DIGITAL_CFG_CODING BIT(1)
+
+#define ADS112C14_REG_GPIO_CFG 0x0B
+#define ADS112C14_GPIO_CFG_GPIO3_CFG GENMASK(7, 6)
+#define ADS112C14_GPIO_CFG_GPIO2_CFG GENMASK(5, 4)
+#define ADS112C14_GPIO_CFG_GPIO1_CFG GENMASK(3, 2)
+#define ADS112C14_GPIO_CFG_GPIO0_CFG GENMASK(1, 0)
+
+#define ADS112C14_REG_GPIO_DATA_OUTPUT 0x0C
+#define ADS112C14_GPIO_DATA_OUTPUT_GPIO3_SRC BIT(7)
+#define ADS112C14_GPIO_DATA_OUTPUT_GPIO2_SRC BIT(6)
+#define ADS112C14_GPIO_DATA_OUTPUT_GPIO3_DAT_OUT BIT(3)
+#define ADS112C14_GPIO_DATA_OUTPUT_GPIO2_DAT_OUT BIT(2)
+#define ADS112C14_GPIO_DATA_OUTPUT_GPIO1_DAT_OUT BIT(1)
+#define ADS112C14_GPIO_DATA_OUTPUT_GPIO0_DAT_OUT BIT(0)
+
+#define ADS112C14_REG_IDAC_MAG_CFG 0x0D
+#define ADS112C14_IDAC_MAG_CFG_I2MAG GENMASK(7, 4)
+#define ADS112C14_IDAC_MAG_CFG_I1MAG GENMASK(3, 0)
+
+#define ADS112C14_REG_IDAC_MUX_CFG 0x0E
+#define ADS112C14_IDAC_MUX_CFG_IUNIT BIT(7)
+#define ADS112C14_IDAC_MUX_CFG_I2MUX GENMASK(6, 4)
+#define ADS112C14_IDAC_MUX_CFG_I1MUX GENMASK(2, 0)
+
+#define ADS112C14_REG_REG_MAP_CRC 0x0F
+
+static bool ads112c14_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ADS112C14_REG_DEVICE_ID:
+ case ADS112C14_REG_REVISION_ID:
+ case ADS112C14_REG_STATUS_LSB:
+ return false;
+ default:
+ return true;
+ }
+}
+
+static bool ads112c14_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case ADS112C14_REG_STATUS_MSB:
+ case ADS112C14_REG_STATUS_LSB:
+ case ADS112C14_REG_CONVERSION_CTRL:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct reg_default ads112c14_reg_defaults[] = {
+ { ADS112C14_REG_DEVICE_CFG, 0x00 },
+ { ADS112C14_REG_DATA_RATE_CFG, 0x00 },
+ { ADS112C14_REG_MUX_CFG, 0x00 },
+ { ADS112C14_REG_GAIN_CFG, 0x01 },
+ { ADS112C14_REG_REFERENCE_CFG, 0x00 },
+ { ADS112C14_REG_DIGITAL_CFG, 0x00 },
+ { ADS112C14_REG_GPIO_CFG, 0x00 },
+ { ADS112C14_REG_GPIO_DATA_OUTPUT, 0x00 },
+ { ADS112C14_REG_IDAC_MAG_CFG, 0x00 },
+ { ADS112C14_REG_IDAC_MUX_CFG, 0x10 },
+};
+
+static const struct regmap_config ads112c14_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .read_flag_mask = ADS112C14_CMD_RREG,
+ .write_flag_mask = ADS112C14_CMD_WREG,
+ .max_register = ADS112C14_REG_REG_MAP_CRC,
+ .writeable_reg = ads112c14_writeable_reg,
+ .volatile_reg = ads112c14_volatile_reg,
+ .reg_defaults = ads112c14_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(ads112c14_reg_defaults),
+ .cache_type = REGCACHE_MAPLE,
+};
+
+struct ads112c14_chip_info {
+ const char *name;
+ u32 resolution_bits;
+};
+
+struct ads112c14_data {
+ const struct ads112c14_chip_info *chip_info;
+ struct i2c_client *client;
+ struct regmap *regmap;
+};
+
+/* Maps REF_VAL to microvolts. */
+static const u32 ads112c14_internal_ref_uV[] = {
+ [ADS112C14_REFERENCE_CFG_REF_VAL_1_25V] = 1.25 * MICRO,
+ [ADS112C14_REFERENCE_CFG_REF_VAL_2_5V] = 2.5 * MICRO,
+};
+
+/* Fixed channels for system monitor measurements. */
+#define ADS112C14_SYS_MON_CHANNEL_TEMP 100
+#define ADS112C14_SYS_MON_CHANNEL_EXT_REF 101
+#define ADS112C14_SYS_MON_CHANNEL_AVDD 102
+#define ADS112C14_SYS_MON_CHANNEL_DVDD 103
+#define ADS112C14_SYS_MON_CHANNEL_SHORT 104
+
+static const struct iio_chan_spec ads112c14_sys_mon_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .indexed = 1,
+ .channel = ADS112C14_SYS_MON_CHANNEL_TEMP,
+ .address = 2,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
+ | BIT(IIO_CHAN_INFO_SCALE)
+ | BIT(IIO_CHAN_INFO_OFFSET),
+ },
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = ADS112C14_SYS_MON_CHANNEL_EXT_REF,
+ .address = 3,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
+ | BIT(IIO_CHAN_INFO_SCALE),
+ },
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = ADS112C14_SYS_MON_CHANNEL_AVDD,
+ .address = 4,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
+ | BIT(IIO_CHAN_INFO_SCALE),
+ },
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = ADS112C14_SYS_MON_CHANNEL_DVDD,
+ .address = 5,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
+ | BIT(IIO_CHAN_INFO_SCALE),
+ },
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = ADS112C14_SYS_MON_CHANNEL_SHORT,
+ .channel2 = ADS112C14_SYS_MON_CHANNEL_SHORT,
+ .differential = 1,
+ .address = 1,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
+ | BIT(IIO_CHAN_INFO_SCALE),
+ },
+};
+
+static int ads112c14_prepare_sys_mon_channel(struct ads112c14_data *data,
+ const struct iio_chan_spec *chan)
+{
+ int ret;
+
+ /* TODO: GAIN is useful for shorted PGA inputs. */
+ /* All SYS_MON channels use GAIN of 1 to keep it simple. */
+ ret = regmap_update_bits(data->regmap, ADS112C14_REG_GAIN_CFG,
+ ADS112C14_GAIN_CFG_SYS_MON |
+ ADS112C14_GAIN_CFG_GAIN,
+ FIELD_PREP(ADS112C14_GAIN_CFG_SYS_MON, chan->address) |
+ FIELD_PREP(ADS112C14_GAIN_CFG_GAIN, 1));
+ if (ret)
+ return ret;
+
+ /* All SYS_MON channels use signed data to keep it simple. */
+ ret = regmap_clear_bits(data->regmap, ADS112C14_REG_DIGITAL_CFG,
+ ADS112C14_DIGITAL_CFG_CODING);
+ if (ret)
+ return ret;
+
+ /* TODO: REF_SEL does matter for shorted PGA inputs. */
+ /*
+ * REVISIT: if we implement regulator support for the REFOUT pin, we
+ * might need to make this voltage match what is required by that. In
+ * that case, we could also adjust GAIN so that we still get the same
+ * range.
+ */
+ /*
+ * Setting REF_SEL for SYS_MON doesn't matter (always uses internal
+ * reference), but we do need to set REF_VAL.
+ */
+ ret = regmap_update_bits(data->regmap, ADS112C14_REG_REFERENCE_CFG,
+ ADS112C14_REFERENCE_CFG_REF_VAL,
+ FIELD_PREP(ADS112C14_REFERENCE_CFG_REF_VAL,
+ ADS112C14_REFERENCE_CFG_REF_VAL_2_5V));
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ads112c14_single_conversion(struct ads112c14_data *data,
+ const struct iio_chan_spec *chan,
+ u8 *buf)
+{
+ u32 reg_val;
+ int ret;
+
+ if (chan->channel >= 100) {
+ ret = ads112c14_prepare_sys_mon_channel(data, chan);
+ if (ret)
+ return ret;
+ } else {
+ /* Not implemented yet. */
+ return -EINVAL;
+ }
+
+ ret = regmap_write(data->regmap, ADS112C14_REG_CONVERSION_CTRL,
+ ADS112C14_CONVERSION_CTRL_START);
+ if (ret)
+ return ret;
+
+ ret = regmap_read_poll_timeout(data->regmap,
+ ADS112C14_REG_STATUS_MSB, reg_val,
+ FIELD_GET(ADS112C14_STATUS_MSB_DRDY, reg_val),
+ 1 * USEC_PER_MSEC, 10 * USEC_PER_MSEC);
+ if (ret)
+ return ret;
+
+ return i2c_smbus_read_i2c_block_data(data->client, ADS112C14_CMD_RDATA,
+ BITS_TO_BYTES(data->chip_info->resolution_bits),
+ buf);
+}
+
+static int ads112c14_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct ads112c14_data *data = iio_priv(indio_dev);
+ u32 vref_uV, fsr_bits;
+
+ /* Selecting V_REF source is not implemented yet. */
+ vref_uV = ads112c14_internal_ref_uV[ADS112C14_REFERENCE_CFG_REF_VAL_2_5V];
+
+ /* Currently, everything is using signed data. */
+ fsr_bits = data->chip_info->resolution_bits - 1;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW: {
+ u8 buf[3];
+ int ret;
+
+ if (!iio_device_claim_direct(indio_dev))
+ return -EBUSY;
+
+ ret = ads112c14_single_conversion(data, chan, buf);
+ iio_device_release_direct(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ switch (data->chip_info->resolution_bits) {
+ case 16:
+ *val = get_unaligned_be16(buf);
+ break;
+ case 24:
+ *val = get_unaligned_be24(buf);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ *val = sign_extend32(*val, fsr_bits);
+
+ return IIO_VAL_INT;
+ }
+ case IIO_CHAN_INFO_SCALE:
+ if (chan->type == IIO_TEMP) {
+ /* TS_TC (typical) = 405 uV/°C */
+ *val = MILLI * vref_uV / 405;
+ *val2 = fsr_bits;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ }
+
+ *val = vref_uV / (MICRO / MILLI);
+ /*
+ * Last 3 SYS_MON channels (ext ref, AVDD, DVDD) need to be
+ * multiplied by 8 to account for internal attenuation of / 8.
+ */
+ *val2 = fsr_bits - (chan->address >= 3 ? 3 : 0);
+ return IIO_VAL_FRACTIONAL_LOG2;
+ case IIO_CHAN_INFO_OFFSET:
+ /* Only the temperature channel has an offset. */
+ if (chan->type != IIO_TEMP)
+ return -EINVAL;
+ /* Die temperature [°C] = 25°C + (Measured voltage – TS_Offset) / TS_TC */
+ /* TS_TC (typical) = 405 uV/°C */
+ /* TS_Offset (typical) = 119.5 mV */
+ *val = div_s64((s64)(25 * 405 - 119500) * BIT(fsr_bits), vref_uV);
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ads112c14_read_label(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, char *label)
+{
+ const char *label_source;
+
+ /* System monitor channels. */
+ switch (chan->channel) {
+ case ADS112C14_SYS_MON_CHANNEL_TEMP:
+ label_source = "Internal temperature sensor";
+ break;
+ case ADS112C14_SYS_MON_CHANNEL_EXT_REF:
+ label_source = "External reference";
+ break;
+ case ADS112C14_SYS_MON_CHANNEL_AVDD:
+ label_source = "AVDD";
+ break;
+ case ADS112C14_SYS_MON_CHANNEL_DVDD:
+ label_source = "DVDD";
+ break;
+ case ADS112C14_SYS_MON_CHANNEL_SHORT:
+ label_source = "Internal short";
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return sysfs_emit(label, "%s\n", label_source);
+}
+
+static const struct iio_info ads112c14_info = {
+ .read_raw = ads112c14_read_raw,
+ .read_label = ads112c14_read_label,
+};
+
+static int ads112c14_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ const struct ads112c14_chip_info *info;
+ struct iio_dev *indio_dev;
+ struct ads112c14_data *data;
+ u32 reg_val;
+ int ret;
+
+ info = i2c_get_match_data(client);
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ data->chip_info = info;
+ data->client = client;
+
+ ret = devm_regulator_get_enable(&client->dev, "dvdd");
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get dvdd regulator\n");
+
+ ret = devm_regulator_get_enable(&client->dev, "avdd");
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get avdd regulator\n");
+
+ data->regmap = devm_regmap_init_i2c(client, &ads112c14_regmap_config);
+ if (IS_ERR(data->regmap))
+ return dev_err_probe(dev, PTR_ERR(data->regmap),
+ "failed to init regmap\n");
+
+ /* Write magic reset value (0x16) to ensure known state.*/
+ ret = regmap_write(data->regmap, ADS112C14_REG_CONVERSION_CTRL,
+ FIELD_PREP(ADS112C14_CONVERSION_CTRL_RESET, 0x16));
+ /*
+ * The reset may cause an -EREMOTEIO error because of failing to get the
+ * I2C ACK at the end of the message. The device still gets reset.
+ */
+ if (ret != -EREMOTEIO)
+ return ret;
+
+ fsleep(ADS112C14_DELAY_RESET_us);
+
+ ret = regmap_read(data->regmap, ADS112C14_REG_STATUS_MSB, ®_val);
+ if (ret)
+ return ret;
+
+ if (FIELD_GET(ADS112C14_STATUS_MSB_RESETN, reg_val))
+ return dev_err_probe(dev, -EIO, "reset failed\n");
+
+ /*
+ * Clear reset bit to prepare for next probe. And clear AVDD fault since
+ * that happens on every reset.
+ */
+ ret = regmap_write(data->regmap, ADS112C14_REG_STATUS_MSB,
+ ADS112C14_STATUS_MSB_RESETN |
+ ADS112C14_STATUS_MSB_AVDD_UVN);
+ if (ret)
+ return ret;
+
+ /* Place in single-shot conversion mode to make ready for raw read. */
+ ret = regmap_set_bits(data->regmap, ADS112C14_REG_DEVICE_CFG,
+ ADS112C14_DEVICE_CFG_CONV_MODE);
+ if (ret)
+ return ret;
+
+ indio_dev->name = info->name;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = ads112c14_sys_mon_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ads112c14_sys_mon_channels);
+ indio_dev->info = &ads112c14_info;
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct ads112c14_chip_info ads112c14_chip_info = {
+ .name = "ads112c14",
+ .resolution_bits = 16,
+};
+
+static const struct ads112c14_chip_info ads122c14_chip_info = {
+ .name = "ads122c14",
+ .resolution_bits = 24,
+};
+
+static const struct of_device_id ads112c14_of_match[] = {
+ { .compatible = "ti,ads112c14", .data = &ads112c14_chip_info },
+ { .compatible = "ti,ads122c14", .data = &ads122c14_chip_info },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ads112c14_of_match);
+
+static const struct i2c_device_id ads112c14_id[] = {
+ { .name = "ads112c14", .driver_data = (kernel_ulong_t)&ads112c14_chip_info },
+ { .name = "ads122c14", .driver_data = (kernel_ulong_t)&ads122c14_chip_info },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ads112c14_id);
+
+static struct i2c_driver ads112c14_driver = {
+ .driver = {
+ .name = "ads112c14",
+ .of_match_table = ads112c14_of_match,
+ },
+ .probe = ads112c14_probe,
+ .id_table = ads112c14_id,
+};
+module_i2c_driver(ads112c14_driver);
+
+MODULE_AUTHOR("David Lechner (TI) <dlechner@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("TI ADS112C14 I2C ADC driver");
+MODULE_LICENSE("GPL");
--
2.43.0