Re: [PATCH RFC v3 1/6] arm64: dts: qcom: add PMIC5 Gen3 macros for channel numbers

[Dmitry Baryshkov]

On Mon, Jun 15, 2026 at 07:00:07PM +0200, Neil Armstrong wrote:
> Add the PMIC5 Gen3 macros to calculate the channel numbers which
> is a combination of SPMI bus number and a constant for the sensor
> type and configuration.
> 
> The macros definitions were taken out of [1] where it was initially
> in the dt-bindings include directory but since those are not hardware
> bindings but logical numbers, they can be moved to local includes
> instead to make the DT source more readable.
> 
> [1] https://lore.kernel.org/all/20250826083657.4005727-4-jishnu.prakash@xxxxxxxxxxxxxxxx/
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcom,adc5-gen3-channels.h | 88 ++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qcom,pm8550-adc5-gen3.h   | 46 +++++++++++
>  arch/arm64/boot/dts/qcom/qcom,pm8550b-adc5-gen3.h  | 85 +++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qcom,pm8550vx-adc5-gen3.h | 22 ++++++
>  arch/arm64/boot/dts/qcom/qcom,pmk8550-adc5-gen3.h  | 52 +++++++++++++
>  5 files changed, 293 insertions(+)
> 

After 's/ACD5/ADC5/':


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>



-- 
With best wishes
Dmitry