Re: [PATCH v1 1/2] arm64: dts: qcom: eliza: Add LPASS macro and SoundWire support

[Ravi Hothi]

On 7/7/2026 2:12 PM, Konrad Dybcio wrote:
> On 7/3/26 10:34 AM, Ravi Hothi wrote:
> > Add SoC-level LPASS WSA macro, VA macro, SoundWire controller and LPASS
> > LPI pin controller nodes. DMIC and WSA SoundWire pinctrl states are
> > defined inside the LPASS LPI pin controller node. The hardware is similar
> > to the SM8750 platform.
> >
> > The WSA macro, VA macro and SoundWire controller are kept disabled so
> > board DTS files can selectively enable and configure them.
> >
> > Signed-off-by: Ravi Hothi <ravi.hothi@xxxxxxxxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/qcom/eliza.dtsi | 193 ++++++++++++++++++++++++++++
> >   1 file changed, 193 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi
> > index 8dbfd0504598..142f43a1e6a3 100644
> > --- a/arch/arm64/boot/dts/qcom/eliza.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/eliza.dtsi
> > @@ -19,6 +19,7 @@
> >   #include <dt-bindings/power/qcom,rpmhpd.h>
> >   #include <dt-bindings/soc/qcom,gpr.h>
> >   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> > +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
> >   
> >   / {
> >   	interrupt-parent = <&intc>;
> > @@ -2072,6 +2073,198 @@ lpass_lpicx_noc: interconnect@7420000 {
> >   			#interconnect-cells = <2>;
> >   		};
> >   
> > +		lpass_wsamacro: codec@6b00000 {
> > +			compatible = "qcom,eliza-lpass-wsa-macro",
> > +				     "qcom,sm8550-lpass-wsa-macro";
> > +			reg = <0x0 0x06b00000 0x0 0x1000>;
>
> Nodes with a unit address must be ordered by it - the diff hunk
> above shows you that this one is out-of-order

ACK, Will update in next version.

Thanks,
Ravi Hothi

> Konrad