Re: [PATCH v2 3/4] arm64: dts: rockchip: Add crypto node to rk356x-base

[Heiko Stübner]

Am Donnerstag, 9. Juli 2026, 01:56:10 Mitteleuropäische Sommerzeit schrieb Sebastian Reichel:
> Hi,
> 
> On Wed, Jul 08, 2026 at 06:58:24PM +0100, Dawid Olesinski wrote:
> > Add the device tree node for the V2 cryptographic hardware accelerator
> > on RK356x SoCs (RK3566, RK3568).
> > 
> > The IP block sits in the non-secure peripheral domain. Its three clocks
> > (core, aclk, hclk) and reset line are accessible directly through the
> > main non-secure CRU, so no firmware intermediary is required.
> > 
> > The node is disabled by default; board files that wish to use hardware
> > crypto offload must enable it.
> 
> Why is it disabled by default? It doesn't seem to be board specific
> at all to me (the same question applies to the RK3588 DT).

You're definitly right about that ... there are no board specific resources
needed, so Dawid please drop the status from both nodes.


Heiko

> > 
> > Signed-off-by: Dawid Olesinski <dawidro@xxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/rockchip/rk356x-base.dtsi | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
> > index a5832895bd39..9de7e7487ca1 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
> > @@ -1112,6 +1112,18 @@ sdhci: mmc@fe310000 {
> >  		status = "disabled";
> >  	};
> >  
> > +	crypto: crypto@fe380000 {
> > +		compatible = "rockchip,rk3568-crypto";
> > +		reg = <0x0 0xfe380000 0x0 0x2000>;
> > +		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&cru CLK_CRYPTO_NS_CORE>, <&cru ACLK_CRYPTO_NS>,
> > +			 <&cru HCLK_CRYPTO_NS>;
> > +		clock-names = "core", "aclk", "hclk";
> > +		resets = <&cru SRST_CRYPTO_NS_CORE>;
> > +		reset-names = "core";
> > +		status = "disabled";
> > +	};
> > +
> >  	/*
> >  	 * Testing showed that the HWRNG found in RK3566 produces unacceptably
> >  	 * low quality of random data, so the HWRNG isn't enabled for all RK356x
>