[PATCH v4 2/2] usb: dwc3: qcom: Modify interrupt handling for eUSB2 Phy targets

[Krishna Kurapati]

eUSB2 targets handle wakeup interrupts differently depending on device
speed when operating in host mode.

According to the eUSB2 specification, remote wakeup signaling in host
mode is detected via different data-line assertions based on the
connected device speed.

When a low-speed device is connected, the host repeater drives eD+ to
logic '1' upon detecting a K-state on the USB lines during remote wakeup
(eUSB2 specification, Section 5.5.14).

When a full-speed or high-speed device is connected, the host repeater
drives eD- to logic '1' upon detecting a K-state on the USB line during
remote wakeup (eUSB2 specification, Sections 5.5.15 and 5.5.18).

Since the eUSB2 PHY's "DP" and "DM" interrupt lines monitor the eD+ and
eD- line states, configure the wakeup interrupts accordingly

Signed-off-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-qcom.c | 40 ++++++++++++++++++++++++++++++----------
 1 file changed, 30 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index f43f73ac36ff..65996d47da1f 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -85,6 +85,7 @@ struct dwc3_qcom {
 	struct icc_path		*icc_path_apps;
 
 	enum usb_role		current_role;
+	bool			has_eusb2_phy;
 };
 
 #define to_dwc3_qcom(d) container_of((d), struct dwc3_qcom, dwc)
@@ -272,15 +273,23 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
 	disable_irq_nosync(irq);
 }
 
-static void dwc3_qcom_disable_port_interrupts(struct dwc3_qcom_port *port)
+static void dwc3_qcom_disable_port_interrupts(struct dwc3_qcom *qcom, int port_index)
 {
+	struct dwc3_qcom_port *port = &qcom->ports[port_index];
+
 	dwc3_qcom_disable_wakeup_irq(port->qusb2_phy_irq);
 
 	if (port->usb2_speed == USB_SPEED_LOW) {
-		dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
+		if (qcom->has_eusb2_phy)
+			dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
+		else
+			dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
 	} else if ((port->usb2_speed == USB_SPEED_HIGH) ||
 			(port->usb2_speed == USB_SPEED_FULL)) {
-		dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
+		if (qcom->has_eusb2_phy)
+			dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
+		else
+			dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
 	} else {
 		dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq);
 		dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq);
@@ -289,8 +298,10 @@ static void dwc3_qcom_disable_port_interrupts(struct dwc3_qcom_port *port)
 	dwc3_qcom_disable_wakeup_irq(port->ss_phy_irq);
 }
 
-static void dwc3_qcom_enable_port_interrupts(struct dwc3_qcom_port *port)
+static void dwc3_qcom_enable_port_interrupts(struct dwc3_qcom *qcom, int port_index)
 {
+	struct dwc3_qcom_port *port = &qcom->ports[port_index];
+
 	dwc3_qcom_enable_wakeup_irq(port->qusb2_phy_irq, 0);
 
 	/*
@@ -303,12 +314,20 @@ static void dwc3_qcom_enable_port_interrupts(struct dwc3_qcom_port *port)
 	 */
 
 	if (port->usb2_speed == USB_SPEED_LOW) {
-		dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
-					    IRQ_TYPE_EDGE_FALLING);
+		if (qcom->has_eusb2_phy)
+			dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
+						    IRQ_TYPE_EDGE_RISING);
+		else
+			dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
+						    IRQ_TYPE_EDGE_FALLING);
 	} else if ((port->usb2_speed == USB_SPEED_HIGH) ||
 			(port->usb2_speed == USB_SPEED_FULL)) {
-		dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
-					    IRQ_TYPE_EDGE_FALLING);
+		if (qcom->has_eusb2_phy)
+			dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq,
+						    IRQ_TYPE_EDGE_RISING);
+		else
+			dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
+						    IRQ_TYPE_EDGE_FALLING);
 	} else {
 		dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq,
 					    IRQ_TYPE_EDGE_RISING);
@@ -324,7 +343,7 @@ static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
 	int i;
 
 	for (i = 0; i < qcom->num_ports; i++)
-		dwc3_qcom_disable_port_interrupts(&qcom->ports[i]);
+		dwc3_qcom_disable_port_interrupts(qcom, i);
 }
 
 static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
@@ -332,7 +351,7 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
 	int i;
 
 	for (i = 0; i < qcom->num_ports; i++)
-		dwc3_qcom_enable_port_interrupts(&qcom->ports[i]);
+		dwc3_qcom_enable_port_interrupts(qcom, i);
 }
 
 static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
@@ -683,6 +702,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
 	if (ignore_pipe_clk)
 		dwc3_qcom_select_utmi_clk(qcom);
 
+	qcom->has_eusb2_phy = device_property_read_bool(dev, "qcom,has-eusb2-phy");
 	qcom->mode = usb_get_dr_mode(dev);
 
 	if (qcom->mode == USB_DR_MODE_HOST) {

-- 
2.34.1