[PATCH 07/10] arm64: dts: st: Add OMM node on stm32mp231

[Marek Vasut]

Add Octo Memory Manager (OMM) entry on stm32mp231 and its two
OSPI instance.

Signed-off-by: Marek Vasut <marex@xxxxxxxxxxxx>
---
Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
Cc: Bartosz Golaszewski <brgl@xxxxxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Linus Walleij <linusw@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: kernel@xxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-gpio@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
---
 arch/arm64/boot/dts/st/stm32mp231.dtsi | 54 ++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp231.dtsi b/arch/arm64/boot/dts/st/stm32mp231.dtsi
index d70812f094142..4505fc0e3b537 100644
--- a/arch/arm64/boot/dts/st/stm32mp231.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp231.dtsi
@@ -222,6 +222,60 @@ hpdma3: dma-controller@40420000 {
 			#dma-cells = <3>;
 		};
 
+		ommanager: ommanager@40500000 {
+			compatible = "st,stm32mp25-omm";
+			reg = <0x40500000 0x400>, <0x60000000 0x10000000>;
+			reg-names = "regs", "memory_map";
+			ranges = <0 0 0x40430000 0x400>,
+				 <1 0 0x40440000 0x400>;
+			clocks = <&rcc CK_BUS_OSPIIOM>,
+				 <&scmi_clk CK_SCMI_OSPI1>,
+				 <&scmi_clk CK_SCMI_OSPI2>;
+			clock-names = "omm", "ospi1", "ospi2";
+			resets = <&rcc OSPIIOM_R>,
+				 <&scmi_reset RST_SCMI_OSPI1>,
+				 <&scmi_reset RST_SCMI_OSPI2>;
+			reset-names = "omm", "ospi1", "ospi2";
+			access-controllers = <&rifsc 111>;
+			power-domains = <&cluster_pd>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			st,syscfg-amcr = <&syscfg 0x2c00 0x7>;
+			status = "disabled";
+
+			ospi1: spi@0 {
+				compatible = "st,stm32mp25-ospi";
+				reg = <0 0 0x400>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&hpdma 2 0x62 0x3121>,
+				       <&hpdma 2 0x42 0x3112>;
+				dma-names = "tx", "rx";
+				clocks = <&scmi_clk CK_SCMI_OSPI1>;
+				resets = <&scmi_reset RST_SCMI_OSPI1>,
+					 <&scmi_reset RST_SCMI_OSPI1DLL>;
+				access-controllers = <&rifsc 74>;
+				power-domains = <&cluster_pd>;
+				st,syscfg-dlyb = <&syscfg 0x1000>;
+				status = "disabled";
+			};
+
+			ospi2: spi@1 {
+				compatible = "st,stm32mp25-ospi";
+				reg = <1 0 0x400>;
+				interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&hpdma 3 0x62 0x3121>,
+				       <&hpdma 3 0x42 0x3112>;
+				dma-names = "tx", "rx";
+				clocks = <&scmi_clk CK_SCMI_OSPI2>;
+				resets = <&scmi_reset RST_SCMI_OSPI2>,
+					 <&scmi_reset RST_SCMI_OSPI2DLL>;
+				access-controllers = <&rifsc 75>;
+				power-domains = <&cluster_pd>;
+				st,syscfg-dlyb = <&syscfg 0x1400>;
+				status = "disabled";
+			};
+		};
+
 		rifsc: bus@42080000 {
 			compatible = "st,stm32mp25-rifsc", "simple-bus";
 			reg = <0x42080000 0x1000>;
-- 
2.53.0