[PATCH v2 2/3] clk: qcom: dispcc-sm8450: Migrate to qcom_cc_driver_data

[Esteban Urrutia via B4 Relay]

From: Esteban Urrutia <esteuwu@xxxxxxxxx>

Migrate to qcom_cc_driver_data, which is used by other clock controller
drivers.

Signed-off-by: Esteban Urrutia <esteuwu@xxxxxxxxx>
---
 drivers/clk/qcom/dispcc-sm8450.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/qcom/dispcc-sm8450.c b/drivers/clk/qcom/dispcc-sm8450.c
index c7e04bd315d5..07f22b5b5ee5 100644
--- a/drivers/clk/qcom/dispcc-sm8450.c
+++ b/drivers/clk/qcom/dispcc-sm8450.c
@@ -1778,6 +1778,22 @@ static const struct regmap_config disp_cc_sm8450_regmap_config = {
 	.fast_io = true,
 };
 
+static struct clk_alpha_pll *disp_cc_sm8450_plls[] = {
+	&disp_cc_pll0,
+	&disp_cc_pll1,
+};
+
+static const u32 disp_cc_sm8450_critical_cbcrs[] = {
+	0xe05c, /* DISP_CC_XO_CLK */
+};
+
+static const struct qcom_cc_driver_data disp_cc_sm8450_driver_data = {
+	.alpha_plls = disp_cc_sm8450_plls,
+	.num_alpha_plls = ARRAY_SIZE(disp_cc_sm8450_plls),
+	.clk_cbcrs = disp_cc_sm8450_critical_cbcrs,
+	.num_clk_cbcrs = ARRAY_SIZE(disp_cc_sm8450_critical_cbcrs),
+};
+
 static const struct qcom_cc_desc disp_cc_sm8450_desc = {
 	.config = &disp_cc_sm8450_regmap_config,
 	.clks = disp_cc_sm8450_clocks,
@@ -1786,6 +1802,7 @@ static const struct qcom_cc_desc disp_cc_sm8450_desc = {
 	.num_resets = ARRAY_SIZE(disp_cc_sm8450_resets),
 	.gdscs = disp_cc_sm8450_gdscs,
 	.num_gdscs = ARRAY_SIZE(disp_cc_sm8450_gdscs),
+	.driver_data = &disp_cc_sm8450_driver_data,
 };
 
 static const struct of_device_id disp_cc_sm8450_match_table[] = {
@@ -1823,19 +1840,16 @@ static int disp_cc_sm8450_probe(struct platform_device *pdev)
 		disp_cc_pll1.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE];
 		disp_cc_pll1.clkr.hw.init = &sm8475_disp_cc_pll1_init;
 
-		clk_lucid_ole_pll_configure(&disp_cc_pll0, regmap, &sm8475_disp_cc_pll0_config);
-		clk_lucid_ole_pll_configure(&disp_cc_pll1, regmap, &sm8475_disp_cc_pll1_config);
+		disp_cc_pll0.config = &sm8475_disp_cc_pll0_config;
+		disp_cc_pll1.config = &sm8475_disp_cc_pll1_config;
 	} else {
-		clk_lucid_evo_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
-		clk_lucid_evo_pll_configure(&disp_cc_pll1, regmap, &disp_cc_pll1_config);
+		disp_cc_pll0.config = &disp_cc_pll0_config;
+		disp_cc_pll1.config = &disp_cc_pll1_config;
 	}
 
 	/* Enable clock gating for MDP clocks */
 	regmap_update_bits(regmap, DISP_CC_MISC_CMD, 0x10, 0x10);
 
-	/* Keep some clocks always-on */
-	qcom_branch_set_clk_en(regmap, 0xe05c); /* DISP_CC_XO_CLK */
-
 	ret = qcom_cc_really_probe(&pdev->dev, &disp_cc_sm8450_desc, regmap);
 	if (ret)
 		goto err_put_rpm;

-- 
2.55.0