Re: [PATCH v6 09/25] KVM: arm64: iommu: Add memory pool

From: Mostafa Saleh

Date: Mon Jul 13 2026 - 06:35:56 EST


On Fri, Jul 10, 2026 at 05:33:14PM +0100, Vincent Donnefort wrote:
> On Fri, May 01, 2026 at 11:19:11AM +0000, Mostafa Saleh wrote:
> > IOMMU drivers would require to allocate memory for the shadow page
> > table. Similar to the host stage-2 CPU page table, the IOMMU pool
> > is allocated early from the carveout and it's memory is added in
> > a pool which the IOMMU driver can allocate from and reclaim at
> > run time.
> >
> > As this is too early for drivers to use init calls, set the number of
> > page allocated from the kernel command line "kvm-arm.hyp_iommu_pages".
> >
> > Later when the driver registers, it will pass how many pages it
> > needs, and if it was less than what was allocated, it will fail
> > to register.
> >
> > Signed-off-by: Mostafa Saleh <smostafa@xxxxxxxxxx>
> > ---
> > .../admin-guide/kernel-parameters.txt | 4 +++
> > arch/arm64/include/asm/kvm_host.h | 3 +-
> > arch/arm64/kvm/hyp/include/nvhe/iommu.h | 7 +++-
> > arch/arm64/kvm/hyp/nvhe/iommu/iommu.c | 21 +++++++++++-
> > arch/arm64/kvm/hyp/nvhe/setup.c | 12 ++++++-
> > arch/arm64/kvm/iommu.c | 33 ++++++++++++++++++-
> > arch/arm64/kvm/pkvm.c | 1 +
> > 7 files changed, 76 insertions(+), 5 deletions(-)
> >
[...]
> If we expect drivers to use that perhaps we should document a bit better (same
> for kvm_iommu_reclaim_pages()

Will do.

>
> > +void *kvm_iommu_donate_pages(u8 order);
> > +void kvm_iommu_reclaim_pages(void *ptr);
> > +
> > #endif /* __ARM64_KVM_NVHE_IOMMU_H__ */
> > diff --git a/arch/arm64/kvm/hyp/nvhe/iommu/iommu.c b/arch/arm64/kvm/hyp/nvhe/iommu/iommu.c
> > index 1db52bd87c38..53cb5e4b0aac 100644
> > --- a/arch/arm64/kvm/hyp/nvhe/iommu/iommu.c
> > +++ b/arch/arm64/kvm/hyp/nvhe/iommu/iommu.c
>
> Do we really need that subfolder iommu/ ?

Propably not, I will remove it.

>
> > @@ -15,6 +15,7 @@ struct kvm_iommu_ops *kvm_iommu_ops;
> >
> > /* Protected by host_mmu.lock */
> > static bool kvm_idmap_initialized;
> > +static struct hyp_pool iommu_pages_pool;
> >
> > static inline int pkvm_to_iommu_prot(enum kvm_pgtable_prot prot)
> > {
> > @@ -95,7 +96,7 @@ static int kvm_iommu_snapshot_host_stage2(void)
> > return ret;
> > }
> >
> > -int kvm_iommu_init(void)
> > +int kvm_iommu_init(void *pool_base, unsigned int nr_pages)
> > {
> > int ret;
> >
> > @@ -103,6 +104,14 @@ int kvm_iommu_init(void)
> > !kvm_iommu_ops->host_stage2_idmap)
> > return 0;
> >
> > + if (!nr_pages)
> > + return -ENOMEM;
> > +
> > + ret = hyp_pool_init(&iommu_pages_pool, hyp_virt_to_pfn(pool_base),
> > + nr_pages, 0);
> > + if (ret)
> > + return ret;
> > +
> > ret = kvm_iommu_ops->init();
> > if (ret)
> > return ret;
> > @@ -120,3 +129,13 @@ int kvm_iommu_host_stage2_idmap(phys_addr_t start, phys_addr_t end,
> >
> > return kvm_iommu_ops->host_stage2_idmap(start, end, pkvm_to_iommu_prot(prot));
> > }
> > +
> > +void *kvm_iommu_donate_pages(u8 order)
> > +{
> > + return hyp_alloc_pages(&iommu_pages_pool, order);
> > +}
> > +
> > +void kvm_iommu_reclaim_pages(void *ptr)
> > +{
> > + hyp_put_page(&iommu_pages_pool, ptr);
> > +}
> > diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c
> > index 1f6b221db9a0..215014e42c27 100644
> > --- a/arch/arm64/kvm/hyp/nvhe/setup.c
> > +++ b/arch/arm64/kvm/hyp/nvhe/setup.c
> > @@ -23,6 +23,9 @@
> >
> > unsigned long hyp_nr_cpus;
> >
> > +/* See kvm_iommu_pages() */
> > +unsigned int hyp_kvm_iommu_pages;
>
> nit: we tend to use everywhere unsigned long or u64 for nr_pages.

Initially it was size_t. However, the hyp allocator uses unsigned int
so I was matching its type, I was considering to send a patch upstream
for this but that is not really a problem at the moment as it only
overflows if the system has ~2TB of memory.

>
> > +
> > #define hyp_percpu_size ((unsigned long)__per_cpu_end - \
> > (unsigned long)__per_cpu_start)
> >
> > @@ -34,6 +37,7 @@ static void *selftest_base;
> > static void *ffa_proxy_pages;
> > static struct kvm_pgtable_mm_ops pkvm_pgtable_mm_ops;
> > static struct hyp_pool hpool;
> > +static void *iommu_base;
> >
> > static int divide_memory_pool(void *virt, unsigned long size)
> > {
> > @@ -71,6 +75,12 @@ static int divide_memory_pool(void *virt, unsigned long size)
> > if (!ffa_proxy_pages)
> > return -ENOMEM;
> >
> > + if (hyp_kvm_iommu_pages) {
> > + iommu_base = hyp_early_alloc_contig(hyp_kvm_iommu_pages);
> > + if (!iommu_base)
> > + return -ENOMEM;
> > + }
> > +
> > return 0;
> > }
> >
> > @@ -330,7 +340,7 @@ void __noreturn __pkvm_init_finalise(void)
> > if (ret)
> > goto out;
> >
> > - ret = kvm_iommu_init();
> > + ret = kvm_iommu_init(iommu_base, hyp_kvm_iommu_pages);
> > if (ret)
> > goto out;
> >
> > diff --git a/arch/arm64/kvm/iommu.c b/arch/arm64/kvm/iommu.c
> > index f247384fa193..213429ceb549 100644
> > --- a/arch/arm64/kvm/iommu.c
> > +++ b/arch/arm64/kvm/iommu.c
> > @@ -7,10 +7,11 @@
> > #include <linux/kvm_host.h>
> >
> > extern struct kvm_iommu_ops *kvm_nvhe_sym(kvm_iommu_ops);
> > +extern unsigned int kvm_nvhe_sym(hyp_kvm_iommu_pages);
> >
> > static DEFINE_MUTEX(kvm_iommu_reg_lock);
> >
> > -int kvm_iommu_register_driver(struct kvm_iommu_ops *hyp_ops)
> > +int kvm_iommu_register_driver(struct kvm_iommu_ops *hyp_ops, unsigned int pool_pages)
>
> nit: kvm_iommu_init uses nr_pages.
>
> > {
> > guard(mutex)(&kvm_iommu_reg_lock);
> >
> > @@ -21,6 +22,36 @@ int kvm_iommu_register_driver(struct kvm_iommu_ops *hyp_ops)
> > if (kvm_nvhe_sym(kvm_iommu_ops))
> > return -EBUSY;
> >
> > + /* See kvm_iommu_pages() */
> > + if (pool_pages > kvm_nvhe_sym(hyp_kvm_iommu_pages)) {
> > + kvm_err("Not enough memory for the IOMMU pool, need 0x%x pages, check kvm-arm.hyp_iommu_pages",
> > + pool_pages);
> > + return -ENOMEM;
> > + }
> > +
> > kvm_nvhe_sym(kvm_iommu_ops) = hyp_ops;
> > return 0;
> > }
> > +
> > +unsigned int kvm_iommu_pages(void)
> > +{
> > + /*
> > + * This is used very early during setup_arch() before any initcalls
> > + * or any drivers are registered.
> > + * This value is set by a command line option.
> > + * Later, when the driver is registered, it will pass the number
> > + * pages needed for it's page tables, if it was less that what
> > + * the system has already allocated, the registration will fail.
> > + */
> > + return kvm_nvhe_sym(hyp_kvm_iommu_pages);
> > +}
>
> Could we actually estimate the memory needed, based on the allocation for the
> host stage-2 and an estimation of MMIO coverage? This would allow the whole
> thing to run without setting this value as a best effort and to make it
> optional, which is surely more user-friendly?

Not really, this abstracts the IOMMU, so it does not have to match the
host stage-2, in addition that the SMMUv3 driver requires extra pages
for other in-memory data-structure.

At the moment, this is set from the command line which is not really
best effort as the driver later confirms how much memory it needs.

>
> > +
> > +/* Number of pages to reserve for iommu pool*/
> > +static int __init early_hyp_iommu_pages(char *arg)
> > +{
> > + if (!arg)
> > + return -EINVAL;
> > +
> > + return kstrtouint(arg, 0, &kvm_nvhe_sym(hyp_kvm_iommu_pages));
>
> How about using a memory size here with memparse()? This would be more
> transparent for the commandline which can work on different page-size systems.

Makes sense, will do.

Thanks,
Mostafa