Re: [PATCH v2 2/3] ARM: dts: marvell: kirkwood: Correct indentation

[Gregory CLEMENT]

Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx> writes:

> Correct spaces or mix of tabs+spaces into proper tab-indented lines.
> No functional impact (same DTB).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>
> Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).
>
> Changes in v2:
> 1. One more fix in arch/arm/boot/dts/marvell/kirkwood-b3.dts
> ---
>  arch/arm/boot/dts/marvell/kirkwood-b3.dts                     | 4 ++--
>  .../arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts | 2 +-
>  arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi            | 2 +-
>  arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts          | 2 +-
>  arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts          | 2 +-
>  arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi                 | 2 +-
>  6 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-b3.dts b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
> index 681343c1357a..9d5cc1689864 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-b3.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
> @@ -94,10 +94,10 @@ i2c@11000 {
>  
>  		serial@12000 {
>  			/* Internal on test pins, 3.3v TTL
> -		 	 * UART0_RX = Testpoint 65
> +			 * UART0_RX = Testpoint 65
>  			 * UART0_TX = Testpoint 66
>  			 * See the Excito Wiki for more details.
> -		 	 */
> +			 */
>  			status = "okay";
>  		};
>  
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
> index cb564c3bcdc4..a9adb777c7a0 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
> @@ -239,7 +239,7 @@ ethernet0-port@0 {
>  };
>  
>  &pciec {
> -        status = "okay";
> +	status = "okay";
>  };
>  
>  &pcie0 {
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
> index d6b615cf6390..121d84609f20 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
> +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
> @@ -83,7 +83,7 @@ &mdio {
>  	status = "okay";
>  
>  	ethphy0: ethernet-phy@X {
> -                /* overwrite reg property in board file */
> +		/* overwrite reg property in board file */
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
> index 20c6290d2037..82ccc6feaf3c 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
> @@ -109,7 +109,7 @@ led-yellow {
>  			label = "obsa6:yellow:stat";
>  			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
>  		};
> -        };
> +	};
>  
>  	gpio_keys {
>  		compatible = "gpio-keys";
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
> index 2bc4b68bd723..ff08b01434bf 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
> @@ -130,7 +130,7 @@ led-yellow {
>  			label = "obsa7:yellow:stat";
>  			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
>  		};
> -        };
> +	};
>  
>  	gpio_keys {
>  		compatible = "gpio-keys";
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
> index f136059607b7..6c15e9257de3 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
> +++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
> @@ -57,7 +57,7 @@ &mdio {
>  
>  	ethphy1: ethernet-phy@1 {
>  		device_type = "ethernet-phy";
> -                /* overwrite reg property in board file */
> +		/* overwrite reg property in board file */
>  	};
>  };
>  
> -- 
> 2.53.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com