Re: [PATCH v2 1/3] ARM: dts: marvell: armada: Correct indentation

From: Gregory CLEMENT

Date: Mon Jul 13 2026 - 12:00:07 EST


Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx> writes:

> Correct spaces or mix of tabs+spaces into proper tab-indented lines.
> No functional impact (same DTB).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>
> Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).
> ---
> arch/arm/boot/dts/marvell/armada-370.dtsi | 8 ++++----
> arch/arm/boot/dts/marvell/armada-xp-gp.dts | 14 +++++++-------
> 2 files changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/boot/dts/marvell/armada-370.dtsi b/arch/arm/boot/dts/marvell/armada-370.dtsi
> index 2013a5ccecd3..cf73287501da 100644
> --- a/arch/arm/boot/dts/marvell/armada-370.dtsi
> +++ b/arch/arm/boot/dts/marvell/armada-370.dtsi
> @@ -63,8 +63,8 @@ pcie0: pcie@1,0 {
> interrupt-names = "intx";
> interrupts-extended = <&mpic 58>;
> #interrupt-cells = <1>;
> - ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> - 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> + 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> bus-range = <0x00 0xff>;
> interrupt-map-mask = <0 0 0 7>;
> interrupt-map = <0 0 0 1 &pcie0_intc 0>,
> @@ -91,8 +91,8 @@ pcie2: pcie@2,0 {
> interrupt-names = "intx";
> interrupts-extended = <&mpic 62>;
> #interrupt-cells = <1>;
> - ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> - 0x81000000 0 0 0x81000000 0x2 0 1 0>;
> + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> + 0x81000000 0 0 0x81000000 0x2 0 1 0>;
> bus-range = <0x00 0xff>;
> interrupt-map-mask = <0 0 0 7>;
> interrupt-map = <0 0 0 1 &pcie2_intc 0>,
> diff --git a/arch/arm/boot/dts/marvell/armada-xp-gp.dts b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
> index d1d348b91c0a..65cc0373fe04 100644
> --- a/arch/arm/boot/dts/marvell/armada-xp-gp.dts
> +++ b/arch/arm/boot/dts/marvell/armada-xp-gp.dts
> @@ -34,13 +34,13 @@ chosen {
> memory@0 {
> device_type = "memory";
> /*
> - * 8 GB of plug-in RAM modules by default.The amount
> - * of memory available can be changed by the
> - * bootloader according the size of the module
> - * actually plugged. However, memory between
> - * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
> - * the address range used for I/O (internal registers,
> - * MBus windows).
> + * 8 GB of plug-in RAM modules by default.The amount
> + * of memory available can be changed by the
> + * bootloader according the size of the module
> + * actually plugged. However, memory between
> + * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
> + * the address range used for I/O (internal registers,
> + * MBus windows).
> */
> reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
> <0x00000001 0x00000000 0x00000001 0x00000000>;
> --
> 2.53.0
>

--
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com