[PATCH v1 05/12] perf vendor events intel: Update grandridge events from 1.12 to 1.13
From: Chun-Tse Shao
Date: Mon Jul 13 2026 - 14:20:51 EST
The updated events were published in:
https://github.com/intel/perfmon/commit/e479bd676826824110a49505b51a92952de91200
Signed-off-by: Chun-Tse Shao <ctshao@xxxxxxxxxx>
---
.../pmu-events/arch/x86/grandridge/cache.json | 25 ++++
.../arch/x86/grandridge/counter.json | 42 ------
.../arch/x86/grandridge/floating-point.json | 56 +++++++
.../arch/x86/grandridge/memory.json | 57 +++++++
.../arch/x86/grandridge/pipeline.json | 140 ++++++++++++++++++
.../arch/x86/grandridge/uncore-memory.json | 2 +-
.../arch/x86/grandridge/virtual-memory.json | 8 +
tools/perf/pmu-events/arch/x86/mapfile.csv | 2 +-
8 files changed, 288 insertions(+), 44 deletions(-)
delete mode 100644 tools/perf/pmu-events/arch/x86/grandridge/counter.json
diff --git a/tools/perf/pmu-events/arch/x86/grandridge/cache.json b/tools/perf/pmu-events/arch/x86/grandridge/cache.json
index 393ce9421c12..4c7727df33e4 100644
--- a/tools/perf/pmu-events/arch/x86/grandridge/cache.json
+++ b/tools/perf/pmu-events/arch/x86/grandridge/cache.json
@@ -1,4 +1,12 @@
[
+ {
+ "BriefDescription": "Counts the number of requests that were not accepted into the L2Q because the L2Q is FULL.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0x31",
+ "EventName": "CORE_REJECT_L2Q.ANY",
+ "PublicDescription": "Counts the number of (demand and L1 prefetchers) core requests rejected by the L2Q due to a full or nearly full w condition which likely indicates back pressure from L2Q. It also counts requests that would have gone directly to the XQ, but are rejected due to a full or nearly full condition, indicating back pressure from the IDI link. The L2Q may also reject transactions from a core to insure fairness between cores, or to delay a cores dirty eviction when the address conflicts incoming external snoops. (Note that L2 prefetcher requests that are dropped are not counted by this event.) Counts on a per core basis.",
+ "SampleAfterValue": "200003"
+ },
{
"BriefDescription": "Counts the number of L1D cacheline (dirty) evictions caused by load misses, stores, and prefetches.",
"Counter": "0,1,2,3,4,5,6,7",
@@ -62,6 +70,14 @@
"SampleAfterValue": "1000003",
"UMask": "0x1"
},
+ {
+ "BriefDescription": "Counts the number of demand and prefetch transactions that the External Queue (XQ) rejects due to a full or near full condition.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0x30",
+ "EventName": "L2_REJECT_XQ.ANY",
+ "PublicDescription": "Counts the number of demand and prefetch transactions that the External Queue (XQ) rejects due to a full or near full condition which likely indicates back pressure from the IDI link. The XQ may reject transactions from the L2Q (non-cacheable requests), BBL (L2 misses) and WOB (L2 write-back victims).",
+ "SampleAfterValue": "200003"
+ },
{
"BriefDescription": "Counts the number of L2 Cache Accesses that resulted in a Hit from a front door request only (does not include rejects or recycles), per core event",
"Counter": "0,1,2,3,4,5,6,7",
@@ -322,6 +338,15 @@
"SampleAfterValue": "20003",
"UMask": "0x1"
},
+ {
+ "BriefDescription": "Counts the number of memory uops retired. A single uop that performs both a load AND a store will be counted as 1, not 2 (e.g. ADD [mem], CONST)",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "Data_LA": "1",
+ "EventCode": "0xd0",
+ "EventName": "MEM_UOPS_RETIRED.ALL",
+ "SampleAfterValue": "200003",
+ "UMask": "0x83"
+ },
{
"BriefDescription": "Counts the number of load ops retired.",
"Counter": "0,1,2,3,4,5,6,7",
diff --git a/tools/perf/pmu-events/arch/x86/grandridge/counter.json b/tools/perf/pmu-events/arch/x86/grandridge/counter.json
deleted file mode 100644
index d9ac3aca5bd5..000000000000
--- a/tools/perf/pmu-events/arch/x86/grandridge/counter.json
+++ /dev/null
@@ -1,42 +0,0 @@
-[
- {
- "Unit": "core",
- "CountersNumFixed": "3",
- "CountersNumGeneric": "8"
- },
- {
- "Unit": "B2CMI",
- "CountersNumFixed": "0",
- "CountersNumGeneric": "4"
- },
- {
- "Unit": "CHA",
- "CountersNumFixed": "0",
- "CountersNumGeneric": "4"
- },
- {
- "Unit": "IMC",
- "CountersNumFixed": "0",
- "CountersNumGeneric": "4"
- },
- {
- "Unit": "IIO",
- "CountersNumFixed": "0",
- "CountersNumGeneric": "4"
- },
- {
- "Unit": "IRP",
- "CountersNumFixed": "0",
- "CountersNumGeneric": "4"
- },
- {
- "Unit": "PCU",
- "CountersNumFixed": "0",
- "CountersNumGeneric": 4
- },
- {
- "Unit": "CHACMS",
- "CountersNumFixed": "0",
- "CountersNumGeneric": "4"
- }
-]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/grandridge/floating-point.json b/tools/perf/pmu-events/arch/x86/grandridge/floating-point.json
index c567f073713c..67d52477aad6 100644
--- a/tools/perf/pmu-events/arch/x86/grandridge/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/grandridge/floating-point.json
@@ -8,6 +8,22 @@
"SampleAfterValue": "1000003",
"UMask": "0x2"
},
+ {
+ "BriefDescription": "Counts the number of active floating point dividers per cycle in the loop stage.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xcd",
+ "EventName": "ARITH.FPDIV_OCCUPANCY",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x2"
+ },
+ {
+ "BriefDescription": "Counts the number of floating point divider uops executed per cycle.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xcd",
+ "EventName": "ARITH.FPDIV_UOPS",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x8"
+ },
{
"BriefDescription": "Counts the number of all types of floating point operations per uop with all default weighting",
"Counter": "0,1,2,3,4,5,6,7",
@@ -90,6 +106,46 @@
"SampleAfterValue": "1000003",
"UMask": "0x2"
},
+ {
+ "BriefDescription": "Counts the number of uops executed on all floating point ports.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb2",
+ "EventName": "FP_VINT_UOPS_EXECUTED.ALL",
+ "SampleAfterValue": "1000003",
+ "UMask": "0xf"
+ },
+ {
+ "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 0.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb2",
+ "EventName": "FP_VINT_UOPS_EXECUTED.P0",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x2"
+ },
+ {
+ "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 1.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb2",
+ "EventName": "FP_VINT_UOPS_EXECUTED.P1",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x4"
+ },
+ {
+ "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 2.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb2",
+ "EventName": "FP_VINT_UOPS_EXECUTED.P2",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x8"
+ },
+ {
+ "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 0, 1, 2.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb2",
+ "EventName": "FP_VINT_UOPS_EXECUTED.PRIMARY",
+ "SampleAfterValue": "1000003",
+ "UMask": "0xe"
+ },
{
"BriefDescription": "Counts the number of uops executed on floating point and vector integer store data port.",
"Counter": "0,1,2,3,4,5,6,7",
diff --git a/tools/perf/pmu-events/arch/x86/grandridge/memory.json b/tools/perf/pmu-events/arch/x86/grandridge/memory.json
index 48b6301e7696..3cbd86976e51 100644
--- a/tools/perf/pmu-events/arch/x86/grandridge/memory.json
+++ b/tools/perf/pmu-events/arch/x86/grandridge/memory.json
@@ -1,4 +1,12 @@
[
+ {
+ "BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer is stalled due to any number of reasons, including an L1 miss, WCB full, pagewalk, store address block or store data block.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0x05",
+ "EventName": "LD_HEAD.ANY",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x7f"
+ },
{
"BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer is stalled due to any number of reasons, including an L1 miss, WCB full, pagewalk, store address block or store data block, on a load that retires.",
"Counter": "0,1,2,3,4,5,6,7",
@@ -15,6 +23,14 @@
"SampleAfterValue": "1000003",
"UMask": "0xf4"
},
+ {
+ "BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer is stalled due to a DL1 miss.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0x05",
+ "EventName": "LD_HEAD.L1_MISS",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x1"
+ },
{
"BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer and retirement are both stalled due to a DL1 miss.",
"Counter": "0,1,2,3,4,5,6,7",
@@ -23,6 +39,15 @@
"SampleAfterValue": "1000003",
"UMask": "0x81"
},
+ {
+ "BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer is stalled due to other block cases.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0x05",
+ "EventName": "LD_HEAD.OTHER",
+ "PublicDescription": "Counts the number of cycles that the head (oldest load) of the load buffer is stalled due to other block cases such as pipeline conflicts, fences, etc.",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x40"
+ },
{
"BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer and retirement are both stalled due to other block cases.",
"Counter": "0,1,2,3,4,5,6,7",
@@ -32,6 +57,14 @@
"SampleAfterValue": "1000003",
"UMask": "0xc0"
},
+ {
+ "BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer is stalled due to a pagewalk.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0x05",
+ "EventName": "LD_HEAD.PGWALK",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x20"
+ },
{
"BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer and retirement are both stalled due to a pagewalk.",
"Counter": "0,1,2,3,4,5,6,7",
@@ -40,6 +73,14 @@
"SampleAfterValue": "1000003",
"UMask": "0xa0"
},
+ {
+ "BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer is stalled due to a store address match.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0x05",
+ "EventName": "LD_HEAD.ST_ADDR",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x4"
+ },
{
"BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer and retirement are both stalled due to a store address match.",
"Counter": "0,1,2,3,4,5,6,7",
@@ -48,6 +89,22 @@
"SampleAfterValue": "1000003",
"UMask": "0x84"
},
+ {
+ "BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer is stalled due to request buffers full or lock in progress.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0x05",
+ "EventName": "LD_HEAD.WCB_FULL",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x2"
+ },
+ {
+ "BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer and retirement are both stalled due to request buffers full or lock in progress.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0x05",
+ "EventName": "LD_HEAD.WCB_FULL_AT_RET",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x82"
+ },
{
"BriefDescription": "Counts the number of machine clears due to memory ordering caused by a snoop from an external agent. Does not count internally generated machine clears such as those due to memory disambiguation.",
"Counter": "0,1,2,3,4,5,6,7",
diff --git a/tools/perf/pmu-events/arch/x86/grandridge/pipeline.json b/tools/perf/pmu-events/arch/x86/grandridge/pipeline.json
index 0a8f7d327150..01cf2d81757f 100644
--- a/tools/perf/pmu-events/arch/x86/grandridge/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/grandridge/pipeline.json
@@ -8,6 +8,31 @@
"SampleAfterValue": "1000003",
"UMask": "0x3"
},
+ {
+ "BriefDescription": "Counts the number of cycles when any of the integer dividers are active.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "CounterMask": "1",
+ "EventCode": "0xcd",
+ "EventName": "ARITH.IDIV_ACTIVE",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x1"
+ },
+ {
+ "BriefDescription": "Counts the number of active integer dividers per cycle.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xcd",
+ "EventName": "ARITH.IDIV_OCCUPANCY",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x1"
+ },
+ {
+ "BriefDescription": "Counts the number of integer divider uops executed per cycle.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xcd",
+ "EventName": "ARITH.IDIV_UOPS",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x4"
+ },
{
"BriefDescription": "Counts the total number of branch instructions retired for all branch types.",
"Counter": "0,1,2,3,4,5,6,7",
@@ -113,6 +138,14 @@
"SampleAfterValue": "200003",
"UMask": "0xdf"
},
+ {
+ "BriefDescription": "Counts the number of taken branch instructions retired.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xc4",
+ "EventName": "BR_INST_RETIRED.TAKEN",
+ "SampleAfterValue": "200003",
+ "UMask": "0x80"
+ },
{
"BriefDescription": "Counts the total number of mispredicted branch instructions retired for all branch types.",
"Counter": "0,1,2,3,4,5,6,7",
@@ -236,6 +269,80 @@
"EventName": "INST_RETIRED.ANY_P",
"SampleAfterValue": "2000003"
},
+ {
+ "BriefDescription": "Counts the number of uops executed on all Integer ports.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb3",
+ "EventName": "INT_UOPS_EXECUTED.ALL",
+ "SampleAfterValue": "1000003",
+ "UMask": "0xff"
+ },
+ {
+ "BriefDescription": "Counts the number of uops executed on a load port.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb3",
+ "EventName": "INT_UOPS_EXECUTED.LD",
+ "PublicDescription": "Counts the number of uops executed on a load port. This event counts for integer uops even if the destination is FP/vector",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x1"
+ },
+ {
+ "BriefDescription": "Counts the number of uops executed on integer port 0.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb3",
+ "EventName": "INT_UOPS_EXECUTED.P0",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x8"
+ },
+ {
+ "BriefDescription": "Counts the number of uops executed on integer port 1.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb3",
+ "EventName": "INT_UOPS_EXECUTED.P1",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x10"
+ },
+ {
+ "BriefDescription": "Counts the number of uops executed on integer port 2.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb3",
+ "EventName": "INT_UOPS_EXECUTED.P2",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x20"
+ },
+ {
+ "BriefDescription": "Counts the number of uops executed on integer port 3.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb3",
+ "EventName": "INT_UOPS_EXECUTED.P3",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x40"
+ },
+ {
+ "BriefDescription": "Counts the number of uops executed on integer port 0,1, 2, 3.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb3",
+ "EventName": "INT_UOPS_EXECUTED.PRIMARY",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x78"
+ },
+ {
+ "BriefDescription": "Counts the number of uops executed on a Store address port.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb3",
+ "EventName": "INT_UOPS_EXECUTED.STA",
+ "PublicDescription": "Counts the number of uops executed on a Store address port. This event counts integer uops even if the data source is FP/vector",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x2"
+ },
+ {
+ "BriefDescription": "Counts the number of uops executed on an integer store data and jump port.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xb3",
+ "EventName": "INT_UOPS_EXECUTED.STD_JMP",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x4"
+ },
{
"BriefDescription": "Counts the number of retired loads that are blocked because it initially appears to be store forward blocked, but subsequently is shown not to be blocked based on 4K alias check.",
"Counter": "0,1,2,3,4,5,6,7",
@@ -275,6 +382,22 @@
"SampleAfterValue": "20003",
"UMask": "0x8"
},
+ {
+ "BriefDescription": "Counts the number of machine clears that flush the pipeline and restart the machine without the use of microcode.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xc3",
+ "EventName": "MACHINE_CLEARS.FAST",
+ "SampleAfterValue": "20003",
+ "UMask": "0x10"
+ },
+ {
+ "BriefDescription": "Counts the number of virtual traps taken.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0xc3",
+ "EventName": "MACHINE_CLEARS.FPC_VIRTUAL_TRAP",
+ "SampleAfterValue": "20003",
+ "UMask": "0x40"
+ },
{
"BriefDescription": "Counts the number of machines clears due to memory renaming.",
"Counter": "0,1,2,3,4,5,6,7",
@@ -356,6 +479,23 @@
"SampleAfterValue": "200003",
"UMask": "0x4"
},
+ {
+ "BriefDescription": "Counts the number of issue slots not consumed due to a color request for an FCW or MXCSR control register when all 4 colors (copies) are already in use.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0x75",
+ "EventName": "SERIALIZATION.COLOR_STALLS",
+ "SampleAfterValue": "200003",
+ "UMask": "0x8"
+ },
+ {
+ "BriefDescription": "Counts the number of issue slots not consumed by the backend due to a micro-sequencer (MS) scoreboard, which stalls the front-end from issuing from the UROM until a specified older uop retires.",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0x75",
+ "EventName": "SERIALIZATION.NON_C01_MS_SCB",
+ "PublicDescription": "Counts the number of issue slots not consumed by the backend due to a micro-sequencer (MS) scoreboard, which stalls the front-end from issuing from the UROM until a specified older uop retires. The most commonly executed instruction with an MS scoreboard is PAUSE.",
+ "SampleAfterValue": "200003",
+ "UMask": "0x2"
+ },
{
"BriefDescription": "Counts the number of issue slots that were not consumed by the backend because allocation is stalled due to a mispredicted jump or a machine clear. [This event is alias to TOPDOWN_BAD_SPECULATION.ALL_P]",
"Counter": "0,1,2,3,4,5,6,7",
diff --git a/tools/perf/pmu-events/arch/x86/grandridge/uncore-memory.json b/tools/perf/pmu-events/arch/x86/grandridge/uncore-memory.json
index 8413391d752c..cec6e0a3147a 100644
--- a/tools/perf/pmu-events/arch/x86/grandridge/uncore-memory.json
+++ b/tools/perf/pmu-events/arch/x86/grandridge/uncore-memory.json
@@ -448,7 +448,7 @@
"Unit": "IMC"
},
{
- "BriefDescription": "DRAM Precharge commands. : Precharge due to (?) : Counts the number of DRAM Precharge commands sent on this channel.",
+ "BriefDescription": "DRAM Precharge commands. : Precharge due to page table : Counts the number of DRAM Precharge commands sent on this channel.",
"Counter": "0,1,2,3",
"EventCode": "0x03",
"EventName": "UNC_M_PRE_COUNT.PGT",
diff --git a/tools/perf/pmu-events/arch/x86/grandridge/virtual-memory.json b/tools/perf/pmu-events/arch/x86/grandridge/virtual-memory.json
index 35cc5b6d41f2..88996fdac15f 100644
--- a/tools/perf/pmu-events/arch/x86/grandridge/virtual-memory.json
+++ b/tools/perf/pmu-events/arch/x86/grandridge/virtual-memory.json
@@ -137,6 +137,14 @@
"SampleAfterValue": "200003",
"UMask": "0x10"
},
+ {
+ "BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer is stalled due to a DTLB miss",
+ "Counter": "0,1,2,3,4,5,6,7",
+ "EventCode": "0x05",
+ "EventName": "LD_HEAD.DTLB_MISS",
+ "SampleAfterValue": "1000003",
+ "UMask": "0x10"
+ },
{
"BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer and retirement are both stalled due to a DTLB miss.",
"Counter": "0,1,2,3,4,5,6,7",
diff --git a/tools/perf/pmu-events/arch/x86/mapfile.csv b/tools/perf/pmu-events/arch/x86/mapfile.csv
index 554ce716d402..d9f45cc906c7 100644
--- a/tools/perf/pmu-events/arch/x86/mapfile.csv
+++ b/tools/perf/pmu-events/arch/x86/mapfile.csv
@@ -12,7 +12,7 @@ GenuineIntel-6-9[6C],v1.05,elkhartlake,core
GenuineIntel-6-CF,v1.24,emeraldrapids,core
GenuineIntel-6-5[CF],v13,goldmont,core
GenuineIntel-6-7A,v1.01,goldmontplus,core
-GenuineIntel-6-B6,v1.12,grandridge,core
+GenuineIntel-6-B6,v1.13,grandridge,core
GenuineIntel-6-A[DE],v1.19,graniterapids,core
GenuineIntel-6-(3C|45|46),v36,haswell,core
GenuineIntel-6-3F,v29,haswellx,core
--
2.55.0.795.g602f6c329a-goog