Re: [PATCH v2 1/2] dt-bindings: iio: dac: Add DAC8163

[Lukas]

On Wed, Jul 08, 2026 at 05:37:44PM +0100, Conor Dooley wrote:
> > +  clr-gpios:
> > +    description:
> > +      The device registers are reset when this pin is asserted. The output is
> > +      set to zero (xxx2 devices) or mid-scale (xxx3 devices).
> > +    maxItems: 1
> > +
> 
> Sounds like this should be reset-gpios?
> 

Thanks for pointing this out. The description is actually wrong. The
datasheet says: "On activation of CLR, zero scale (DACxx62) or 
mid-scale (DACxx63) is loaded to all input and DAC registers".
That means other registers are unaffected. I will update the description
but the clr-gpios is correct in this case i guess?

Best regards
Lukas