[PATCH 0/5] arm64: dts: qcom: clean up PCI function nodes
From: Alex Elder
Date: Fri Aug 07 2026 - 15:59:01 EST
While working on upstream support for the Toshiba TC9564 SoC I
learned that its PCIe endpoint function nodes included the
device_type property, indicating each is a "pci" device. Herve
Codina pointed out that this is not correct; only a PCI device
"that implements a PCI bus" should define that property.
I looked at other upstream devicetree files and I found four other
places with this same mistake. (All are for Qualcomm platforms,
and all are for platforms using a TC956x SoC.)
This series removes the device_type property where it is defined
for a PCI endpoint function.
It also removes the #address-cells, #size-cells, and ranges
properties in these cases, with a plan to restore them only when
they are known to be needed (to implement pci-ep-bus sub-nodes).
-Alex
Alex Elder (5):
arm64: dts: qcom: qcs6490-rb3gen2: clean up PCI function nodes
arm64: dts: qcom: qcs6490-rb3gen2-industrial-mezzanine: clean up PCI
function nodes
arm64: dts: qcom: lemans-evk-ifp-mezzanine: clean up PCI function
nodes
arm64: dts: qcom: monaco-evk: clean up PCI function nodes
arm64: dts: qcom: qcs6490-thundercomm-minipc-g1iot: clean up PCI
function nodes
.../boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso | 8 --------
.../boot/dts/qcom/monaco-evk-ifp-mezzanine.dtso | 8 --------
.../qcs6490-rb3gen2-industrial-mezzanine.dtso | 16 ----------------
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 8 --------
.../qcom/qcs6490-thundercomm-minipc-g1iot.dts | 8 --------
5 files changed, 48 deletions(-)
base-commit: 064935ef6be39d086f4c40766d2b76181b70b3e1
--
2.53.0