[PATCH v3 3/6] dt-bindings: usb: add Altera Agilex5 DWC3 controller

[Adrian Ng Ho Yin]

Add a binding for the Altera Agilex5 SoC integration of the Synopsys DWC3
USB controller (compatible "altr,agilex5-dwc3"), covering clocks, resets,
PHYs, and optional IOMMU support.

Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@xxxxxxxxxx>
---
 .../bindings/usb/altr,agilex5-dwc3.yaml       | 102 ++++++++++++++++++
 1 file changed, 102 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/altr,agilex5-dwc3.yaml

diff --git a/Documentation/devicetree/bindings/usb/altr,agilex5-dwc3.yaml b/Documentation/devicetree/bindings/usb/altr,agilex5-dwc3.yaml
new file mode 100644
index 000000000000..8a815e8a3b7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/altr,agilex5-dwc3.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/altr,agilex5-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Agilex5 DWC3 USB SoC Controller
+
+maintainers:
+  - Adrian Ng Ho Yin <adrian.ho.yin.ng@xxxxxxxxxx>
+
+description:
+  The Altera Agilex5 SoCFPGA integrates a Synopsys DesignWare USB3 (DWC3)
+  controller that supports host, device and DRD modes.
+
+allOf:
+  - $ref: snps,dwc3-common.yaml#
+
+properties:
+  compatible:
+    const: altr,agilex5-dwc3
+
+  reg:
+    description: DWC3 USB3 controller register region.
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Controller reference clock
+      - description: Controller suspend clock
+      - description: Master/Core bus clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: suspend
+      - const: bus_early
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 2
+    maxItems: 2
+
+  phy-names:
+    items:
+      - const: usb2-phy
+      - const: usb3-phy
+
+  iommus:
+    maxItems: 1
+
+  resets:
+    description: Resets for the DWC3 core and its ECC block.
+    items:
+      - description: DWC3 core reset
+      - description: DWC3 ECC reset
+
+  reset-names:
+    items:
+      - const: dwc3
+      - const: dwc3-ecc
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - phys
+  - phy-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/altr,rst-mgr-s10.h>
+    #include <dt-bindings/clock/intel,agilex5-clkmgr.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        usb@11000000 {
+            compatible = "altr,agilex5-dwc3";
+            reg = <0x11000000 0x100000>;
+            interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clkmgr AGILEX5_USB31_REF_CLK>,
+                     <&clkmgr AGILEX5_USB31_SUSPEND_CLK>,
+                     <&clkmgr AGILEX5_USB31_BUS_CLK_EARLY>;
+            clock-names = "ref", "suspend", "bus_early";
+            phys = <&usbphy0>, <&usbphy1>;
+            phy-names = "usb2-phy", "usb3-phy";
+            resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
+            reset-names = "dwc3", "dwc3-ecc";
+            iommus = <&smmu 7>;
+        };
+    };
-- 
2.49.GIT