[PATCH 8/9] arm64: dts: qcom: ipq8074: Flatten usb controller nodes

[George Moussalem via B4 Relay]

From: George Moussalem <george.moussalem@xxxxxxxxxxx>

Flatten usb controller nodes and update to using latest bindings and
flattened driver approach.

In addition, fix indentation of properties in both nodes.

Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 112 ++++++++++++++++------------------
 1 file changed, 52 insertions(+), 60 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 75a5ae30d966..d4a86b3815f2 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -625,104 +625,96 @@ qpic_nand: nand-controller@79b0000 {
 			status = "disabled";
 		};
 
-		usb_0: usb@8af8800 {
-			compatible = "qcom,ipq8074-dwc3", "qcom,dwc3";
-			reg = <0x08af8800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+		usb_0: usb@8a00000 {
+			compatible = "qcom,ipq8074-dwc3", "qcom,snps-dwc3";
+			reg = <0x08a00000 0xfc100>;
 
 			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
-				<&gcc GCC_USB0_MASTER_CLK>,
-				<&gcc GCC_USB0_SLEEP_CLK>,
-				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				 <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			clock-names = "cfg_noc",
-				"core",
-				"sleep",
-				"mock_utmi";
+				      "core",
+				      "sleep",
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
 					  <&gcc GCC_USB0_MASTER_CLK>,
 					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
 			assigned-clock-rates = <133330000>,
-						<133330000>,
-						<19200000>;
+					       <133330000>,
+					       <19200000>;
 
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "qusb2_phy",
 					  "ss_phy_irq";
 
 			power-domains = <&gcc USB0_GDSC>;
 
+			phys = <&qusb_phy_0>, <&ssphy_0>;
+			phy-names = "usb2-phy", "usb3-phy";
+
+			snps,parkmode-disable-ss-quirk;
+			snps,is-utmi-l1-suspend;
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			dr_mode = "host";
+
 			resets = <&gcc GCC_USB0_BCR>;
-			status = "disabled";
 
-			dwc_0: usb@8a00000 {
-				compatible = "snps,dwc3";
-				reg = <0x8a00000 0xcd00>;
-				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&ssphy_0>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,parkmode-disable-ss-quirk;
-				snps,is-utmi-l1-suspend;
-				snps,hird-threshold = /bits/ 8 <0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_u3_susphy_quirk;
-				dr_mode = "host";
-			};
+			status = "disabled";
 		};
 
-		usb_1: usb@8cf8800 {
-			compatible = "qcom,ipq8074-dwc3", "qcom,dwc3";
-			reg = <0x08cf8800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+		usb_1: usb@8c00000 {
+			compatible = "qcom,ipq8074-dwc3", "qcom,snps-dwc3";
+			reg = <0x08c00000 0xfc100>;
 
 			clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
-				<&gcc GCC_USB1_MASTER_CLK>,
-				<&gcc GCC_USB1_SLEEP_CLK>,
-				<&gcc GCC_USB1_MOCK_UTMI_CLK>;
+				 <&gcc GCC_USB1_MASTER_CLK>,
+				 <&gcc GCC_USB1_SLEEP_CLK>,
+				 <&gcc GCC_USB1_MOCK_UTMI_CLK>;
 			clock-names = "cfg_noc",
-				"core",
-				"sleep",
-				"mock_utmi";
+				      "core",
+				      "sleep",
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
 					  <&gcc GCC_USB1_MASTER_CLK>,
 					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
 			assigned-clock-rates = <133330000>,
-						<133330000>,
-						<19200000>;
+					       <133330000>,
+					       <19200000>;
 
-			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "qusb2_phy",
 					  "ss_phy_irq";
 
 			power-domains = <&gcc USB1_GDSC>;
 
+			phys = <&qusb_phy_1>, <&ssphy_1>;
+			phy-names = "usb2-phy", "usb3-phy";
+
+			snps,parkmode-disable-ss-quirk;
+			snps,is-utmi-l1-suspend;
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			dr_mode = "host";
+
 			resets = <&gcc GCC_USB1_BCR>;
-			status = "disabled";
 
-			dwc_1: usb@8c00000 {
-				compatible = "snps,dwc3";
-				reg = <0x8c00000 0xcd00>;
-				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_1>, <&ssphy_1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,parkmode-disable-ss-quirk;
-				snps,is-utmi-l1-suspend;
-				snps,hird-threshold = /bits/ 8 <0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_u3_susphy_quirk;
-				dr_mode = "host";
-			};
+			status = "disabled";
 		};
 
 		intc: interrupt-controller@b000000 {

-- 
2.53.0