[PATCH] arm64: dts: qcom: shikra: Add EL2 overlay for remoteproc SMMU mappings

[Komal Bajaj]

Shikra boards currently boot Linux under a hypervisor, where the
remote processor firmware IOMMU streams are managed by the hypervisor.
When booting Linux directly at EL2 without the hypervisor, the IOMMU
is instead managed by the consumer of this DeviceTree, so the firmware
streams for each remote processor need to be described explicitly.

Add an EL2-specific DT overlay and apply it to all Shikra EVK variants
devices to produce an -el2.dtb alongside the "normal" dtb.

Co-developed-by: Bibek Kumar Patro <bibek.patro@xxxxxxxxxxxxxxxx>
Signed-off-by: Bibek Kumar Patro <bibek.patro@xxxxxxxxxxxxxxxx>
Signed-off-by: Komal Bajaj <komal.bajaj@xxxxxxxxxxxxxxxx>
---
All existing Shikra EVK board variants boot Linux under a hypervisor,
which means Linux typically runs at EL1. For EL2 boot without the
hypervisor, remote processor firmware IOMMU streams must be described in
the DeviceTree consumed by Linux.

Add a Shikra EL2-specific DT overlay and wire it up in the Makefile to
produce -el2.dtb artifacts for the Shikra EVK variants alongside the
regular dtbs.

Komal Bajaj (1):
  arm64: dts: qcom: shikra: Add EL2 overlay for remoteproc SMMU mappings

 arch/arm64/boot/dts/qcom/Makefile        | 12 ++++++++++++
 arch/arm64/boot/dts/qcom/shikra-el2.dtso | 23 +++++++++++++++++++++++
 2 files changed, 35 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/shikra-el2.dtso
---
 arch/arm64/boot/dts/qcom/Makefile        | 12 ++++++++++++
 arch/arm64/boot/dts/qcom/shikra-el2.dtso | 23 +++++++++++++++++++++++
 2 files changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 5c19f945c785..686d37cab02f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -359,8 +359,20 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdx75-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqm-evk.dtb
+
+shikra-cqm-evk-el2-dtbs	:= shikra-cqm-evk.dtb shikra-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqm-evk-el2.dtb
+
 dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqs-evk.dtb
+
+shikra-cqs-evk-el2-dtbs	:= shikra-cqs-evk.dtb shikra-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqs-evk-el2.dtb
+
 dtb-$(CONFIG_ARCH_QCOM)	+= shikra-iqs-evk.dtb
+
+shikra-iqs-evk-el2-dtbs	:= shikra-iqs-evk.dtb shikra-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= shikra-iqs-evk-el2.dtb
+
 dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm4450-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-fxtec-pro1x.dtb
diff --git a/arch/arm64/boot/dts/qcom/shikra-el2.dtso b/arch/arm64/boot/dts/qcom/shikra-el2.dtso
new file mode 100644
index 000000000000..d2f3186bd47d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/shikra-el2.dtso
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ *
+ * Shikra specific modifications required to boot in EL2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&gpu_zap_shader {
+	status = "disabled";
+};
+
+&remoteproc_cdsp {
+	iommus = <&apps_smmu 0x0200 0x0>;
+};
+
+&remoteproc_lpaicp {
+	iommus = <&apps_smmu 0x0360 0x0005>,
+		 <&apps_smmu 0x0366 0x0000>,
+		 <&apps_smmu 0x00e7 0x0000>;
+};

---
base-commit: e657a464aba873f5eaf3ca821b6e4016674492d6
change-id: 20260918-shikra-el2-ea8969385c3c

Best regards,
-- 
Komal Bajaj <komal.bajaj@xxxxxxxxxxxxxxxx>