[PATCH 3/3] arm64: dts: qcom: glymur: Add EC thermal zones

[Anvesh Jain P]

Add support for back cover, keyboard, and SoC thermal zones through
temperature sensors hosted on the EC for Glymur and Mahua CRDs.

Signed-off-by: Anvesh Jain P <anvesh.p@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 45 +++++++++++++++++++++++++++++++-
 1 file changed, 44 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
index e27c697e3170..571c98124a40 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
@@ -594,10 +594,12 @@ &i2c9 {
 
 	status = "okay";
 
-	embedded-controller@76 {
+	ec: embedded-controller@76 {
 		compatible = "qcom,glymur-crd-ec", "qcom,hamoa-crd-ec";
 		reg = <0x76>;
 
+		#thermal-sensor-cells = <1>;
+
 		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
 
 		pinctrl-0 = <&ec_int_n_default>;
@@ -955,6 +957,47 @@ right_tweeter: speaker@0,1 {
 	};
 };
 
+&thermal_zones {
+	ec-back-cover {
+		polling-delay = <10000>;
+		thermal-sensors = <&ec 2>;
+
+		trips {
+			trip-point0 {
+				temperature = <90000>;
+				hysteresis = <5000>;
+				type = "hot";
+			};
+		};
+	};
+
+	ec-keyboard {
+		polling-delay = <10000>;
+		thermal-sensors = <&ec 1>;
+
+		trips {
+			trip-point0 {
+				temperature = <90000>;
+				hysteresis = <5000>;
+				type = "hot";
+			};
+		};
+	};
+
+	ec-soc {
+		polling-delay = <10000>;
+		thermal-sensors = <&ec 0>;
+
+		trips {
+			trip-point0 {
+				temperature = <90000>;
+				hysteresis = <5000>;
+				type = "hot";
+			};
+		};
+	};
+};
+
 &remoteproc_soccp {
 	firmware-name = "qcom/glymur/soccp.mbn",
 			"qcom/glymur/soccp_dtb.mbn";

-- 
2.34.1