Re: [PATCH v7 3/3] arm64: dts: qcom: Add hamoa Samsung Galaxy Book4 Edge devicetrees

From: Antheas Kapenekakis

Date: Mon Sep 28 2026 - 12:50:03 EST

On Mon, 28 Sept 2026 at 18:44, Antheas Kapenekakis
<kapenekakis@xxxxxxxxx> wrote:
>
> On Sun, 20 Sept 2026 at 20:41, Maxim Storetvedt <mstoretv@xxxxxxx> wrote:
> >
> > Adds devicetrees for the 14-inch and 16-inch hamoa SKUs of the Samsung Galaxy Book4 Edge.
> >
> > These use a common dtsi derived from nodes that were able to work on Linux
> > from the initial Galaxy Book4 Edge DTS by Marcus:
> >
> > Link: https://lore.kernel.org/all/p3mhtj2rp6y2ezuwpd2gu7dwx5cbckfu4s4pazcudi4j2wogtr@4yecb2bkeyms/
> >
> > combined with the patch series the Honor Magicbook Art 14, which shares device similarities:
> >
> > Link: https://lore.kernel.org/all/20260629154812.9066-1-mail@xxxxxxxxxxx/
>
> Links go in the bottom, Based-on-a-patch is not a thing, you may add a
> Coby as noted in a parallel thread.
>
> > as well as a few more adjustments on top of that again to get additional features working.
> > Special thanks to Jesse Ahn for helping expand on what would eventually become this dtsi.
>
> Hi Maxim,
> I tested this series on a kernel with various other backports on two
> european (norwegian market) galaxy book4 edges.
>
> Specifically, the 14in NP940XMA and the 15.6in (not 16) NP750XQB.
> Specifically, the later is an X1Plus variant that came out a year
> later with cheaper components. It does not work properly on either on
> them. I was hoping that at least the 14in model would work as is but
> no.
>
> My test devices have proprietary Samsung battery controllers
> (ENE-KB9058) and type C controllers (Samsung EmuEC). Also the speaker
> amplifiers are different. So the battery reporting, audio, and USB C
> ports do not work at all using your DTs. The TPM does not bind either
> but you do not claim that it does. At least they got me to boot and
> for that I am grateful.
>
> Other stuff also does not work, but I am just listing the main ones.
>
> I suggest you change the -14/-16 suffixes on both models with
> something more specific.
>
> The prior patches in the series look fine to my eyes. I did not A/B
> test them, just pulled them in.

Wrong email again. Sorry. Please reply to my kernel email, best.

> Best,
> Antheas
>
> > Based-on-a-patch-by: Marcus Glocker <marcus@xxxxxxxxx>
> > Based-on-a-patch-by: Kirill A. Korinsky <kirill@xxxxxxxxx>
> > Signed-off-by: Maxim Storetvedt <mstoretv@xxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/Makefile | 2 +
> > .../qcom/x1-samsung-galaxy-book4-edge.dtsi | 1537 +++++++++++++++++
> > .../x1e80100-samsung-galaxy-book4-edge-14.dts | 28 +
> > .../x1e84100-samsung-galaxy-book4-edge-16.dts | 31 +
> > 4 files changed, 1598 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/qcom/x1-samsung-galaxy-book4-edge.dtsi
> > create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-samsung-galaxy-book4-edge-14.dts
> > create mode 100644 arch/arm64/boot/dts/qcom/x1e84100-samsung-galaxy-book4-edge-16.dts
> >
> > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > index 5c19f945c..d8273f86f 100644
> > --- a/arch/arm64/boot/dts/qcom/Makefile
> > +++ b/arch/arm64/boot/dts/qcom/Makefile
> > @@ -498,3 +498,5 @@ x1p64100-microsoft-denali-el2-dtbs := x1p64100-microsoft-denali.dtb x1-el2.dtbo
> > dtb-$(CONFIG_ARCH_QCOM) += x1p64100-microsoft-denali.dtb x1p64100-microsoft-denali-el2.dtb
> > x1p42100-microsoft-sp12in-el2-dtbs := x1p42100-microsoft-sp12in.dtb x1-el2.dtbo
> > dtb-$(CONFIG_ARCH_QCOM) += x1p42100-microsoft-sp12in.dtb x1p42100-microsoft-sp12in-el2.dtb
> > +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-samsung-galaxy-book4-edge-14.dtb
> > +dtb-$(CONFIG_ARCH_QCOM) += x1e84100-samsung-galaxy-book4-edge-16.dtb
> > diff --git a/arch/arm64/boot/dts/qcom/x1-samsung-galaxy-book4-edge.dtsi b/arch/arm64/boot/dts/qcom/x1-samsung-galaxy-book4-edge.dtsi
> > new file mode 100644
> > index 000000000..51ec68bba
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/x1-samsung-galaxy-book4-edge.dtsi
> > @@ -0,0 +1,1537 @@
> > +// SPDX-License-Identifier: BSD-3-Clause
> > +/*
> > + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> > + * Copyright (c) 2025 Kirill A. Korinsky <kirill@xxxxxxxxx>
> > + * Copyright (c) 2025 Valentin Manea <valentin.manea@xxxxxx>
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/gpio-keys.h>
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> > +
> > +#include "hamoa.dtsi"
> > +#include "hamoa-pmics.dtsi"
> > +
> > +/ {
> > + model = "Samsung Galaxy Book4 Edge";
> > + compatible = "samsung,galaxy-book4-edge", "qcom,x1e80100";
> > + chassis-type = "laptop";
> > +
> > + aliases {
> > + serial0 = &uart21;
> > + serial1 = &uart14;
> > + };
> > +
> > + wcd938x: audio-codec {
> > + compatible = "qcom,wcd9385-codec";
> > +
> > + pinctrl-0 = <&wcd_default>;
> > + pinctrl-names = "default";
> > +
> > + qcom,micbias1-microvolt = <1800000>;
> > + qcom,micbias2-microvolt = <1800000>;
> > + qcom,micbias3-microvolt = <1800000>;
> > + qcom,micbias4-microvolt = <1800000>;
> > + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
> > + qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
> > + qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
> > + qcom,rx-device = <&wcd_rx>;
> > + qcom,tx-device = <&wcd_tx>;
> > +
> > + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
> > +
> > + vdd-buck-supply = <&vreg_l15b_1p8>;
> > + vdd-rxtx-supply = <&vreg_l15b_1p8>;
> > + vdd-io-supply = <&vreg_l15b_1p8>;
> > + vdd-mic-bias-supply = <&vreg_bob1>;
> > +
> > + #sound-dai-cells = <1>;
> > + };
> > +
> > + gpio-keys {
> > + compatible = "gpio-keys";
> > +
> > + pinctrl-0 = <&hall_int_n_default>;
> > + pinctrl-names = "default";
> > +
> > + switch-lid {
> > + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
> > + linux,input-type = <EV_SW>;
> > + linux,code = <SW_LID>;
> > + wakeup-source;
> > + wakeup-event-action = <EV_ACT_DEASSERTED>;
> > + };
> > + };
> > +
> > + hdmi-bridge {
> > + compatible = "realtek,rtd2171";
> > +
> > + pinctrl-0 = <&hdmi_hpd_default>;
> > + pinctrl-names = "default";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + hdmi_bridge_dp_in: endpoint {
> > + remote-endpoint = <&usb_1_ss2_qmpphy_out_dp>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + hdmi_bridge_tmds_out: endpoint {
> > + remote-endpoint = <&hdmi_con>;
> > + };
> > + };
> > + };
> > + };
> > +
> > + hdmi-connector {
> > + compatible = "hdmi-connector";
> > + type = "a";
> > +
> > + port {
> > + hdmi_con: endpoint {
> > + remote-endpoint = <&hdmi_bridge_tmds_out>;
> > + };
> > + };
> > + };
> > +
> > + pmic-glink {
> > + compatible = "qcom,x1e80100-pmic-glink",
> > + "qcom,pmic-glink";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
> > + <&tlmm 123 GPIO_ACTIVE_HIGH>;
> > +
> > + /* Left-side rear port */
> > + connector@0 {
> > + compatible = "usb-c-connector";
> > + reg = <0>;
> > + power-role = "dual";
> > + data-role = "dual";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + pmic_glink_ss0_hs_in: endpoint {
> > + remote-endpoint = <&usb_1_ss0_dwc3_hs>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + pmic_glink_ss0_ss_in: endpoint {
> > + remote-endpoint = <&usb_1_ss0_qmpphy_out>;
> > + };
> > + };
> > +
> > + port@2 {
> > + reg = <2>;
> > +
> > + pmic_glink_ss0_sbu: endpoint {
> > + remote-endpoint = <&usb_1_ss0_sbu_mux>;
> > + };
> > + };
> > + };
> > + };
> > +
> > + /* Left-side front port */
> > + connector@1 {
> > + compatible = "usb-c-connector";
> > + reg = <1>;
> > + power-role = "dual";
> > + data-role = "dual";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + pmic_glink_ss1_hs_in: endpoint {
> > + remote-endpoint = <&usb_1_ss1_dwc3_hs>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + pmic_glink_ss1_ss_in: endpoint {
> > + remote-endpoint = <&usb_1_ss1_qmpphy_out>;
> > + };
> > + };
> > +
> > + port@2 {
> > + reg = <2>;
> > +
> > + pmic_glink_ss1_sbu: endpoint {
> > + remote-endpoint = <&usb_1_ss1_sbu_mux>;
> > + };
> > + };
> > + };
> > + };
> > + };
> > +
> > + reserved-memory {
> > + linux,cma {
> > + compatible = "shared-dma-pool";
> > + size = <0x0 0x8000000>;
> > + reusable;
> > + linux,cma-default;
> > + };
> > + };
> > +
> > + sound {
> > + compatible = "qcom,x1e80100-sndcard";
> > + model = "X1E80100-GalaxyBook4Edge";
> > + audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
> > + "TweeterLeft IN", "WSA WSA_SPK2 OUT",
> > + "WooferRight IN", "WSA2 WSA_SPK2 OUT",
> > + "TweeterRight IN", "WSA2 WSA_SPK2 OUT",
> > + "IN1_HPHL", "HPHL_OUT",
> > + "IN2_HPHR", "HPHR_OUT",
> > + "AMIC2", "MIC BIAS2",
> > + "VA DMIC0", "MIC BIAS3",
> > + "VA DMIC1", "MIC BIAS3",
> > + "VA DMIC2", "MIC BIAS1",
> > + "VA DMIC3", "MIC BIAS1",
> > + "TX SWR_INPUT1", "ADC2_OUTPUT";
> > +
> > + wcd-playback-dai-link {
> > + link-name = "WCD Playback";
> > +
> > + codec {
> > + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
> > + };
> > +
> > + cpu {
> > + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
> > + };
> > +
> > + platform {
> > + sound-dai = <&q6apm>;
> > + };
> > + };
> > +
> > + wcd-capture-dai-link {
> > + link-name = "WCD Capture";
> > +
> > + codec {
> > + sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
> > + };
> > +
> > + cpu {
> > + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
> > + };
> > +
> > + platform {
> > + sound-dai = <&q6apm>;
> > + };
> > + };
> > +
> > + wsa-dai-link {
> > + link-name = "WSA Playback";
> > +
> > + codec {
> > + sound-dai = <&left_woofer>, <&left_tweeter>,
> > + <&swr0 0>, <&lpass_wsamacro 0>,
> > + <&right_woofer>, <&right_tweeter>,
> > + <&swr3 0>, <&lpass_wsa2macro 0>;
> > + };
> > +
> > + cpu {
> > + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
> > + };
> > +
> > + platform {
> > + sound-dai = <&q6apm>;
> > + };
> > + };
> > +
> > + va-dai-link {
> > + link-name = "VA Capture";
> > +
> > + codec {
> > + sound-dai = <&lpass_vamacro 0>;
> > + };
> > +
> > + cpu {
> > + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
> > + };
> > +
> > + platform {
> > + sound-dai = <&q6apm>;
> > + };
> > + };
> > + };
> > +
> > + vreg_octa_vdd: regulator-octa-vdd {
> > + compatible = "regulator-fixed";
> > +
> > + regulator-name = "VREG_OCTA_VDD";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > +
> > + gpio = <&tlmm 111 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > +
> > + pinctrl-0 = <&octa_vdd_en>;
> > + pinctrl-names = "default";
> > +
> > + startup-delay-us = <1000>;
> > + regulator-enable-ramp-delay = <1000>;
> > +
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + vreg_display_vdd: regulator-display-vdd {
> > + compatible = "regulator-fixed";
> > +
> > + regulator-name = "VREG_DISPLAY_VDD";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > +
> > + gpio = <&tlmm 120 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > +
> > + pinctrl-0 = <&display_vdd_en>;
> > + pinctrl-names = "default";
> > +
> > + startup-delay-us = <400000>;
> > + regulator-enable-ramp-delay = <400000>;
> > +
> > + vin-supply = <&vreg_octa_vdd>;
> > +
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + vreg_edp_3p3: regulator-edp-3p3 {
> > + compatible = "regulator-fixed";
> > +
> > + regulator-name = "VREG_EDP_3P3";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > +
> > + gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
> > + enable-active-low;
> > +
> > + pinctrl-0 = <&edp_reg_en>;
> > + pinctrl-names = "default";
> > +
> > + startup-delay-us = <1000>;
> > + regulator-enable-ramp-delay = <1000>;
> > +
> > + vin-supply = <&vreg_display_vdd>;
> > +
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > +
> > + vreg_misc_3p3: regulator-misc-3p3 {
> > + compatible = "regulator-fixed";
> > +
> > + regulator-name = "VREG_MISC_3P3";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > +
> > + gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > +
> > + pinctrl-0 = <&misc_3p3_reg_en>;
> > + pinctrl-names = "default";
> > +
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + vph_pwr: regulator-vph-pwr {
> > + compatible = "regulator-fixed";
> > +
> > + regulator-name = "vph_pwr";
> > + regulator-min-microvolt = <3700000>;
> > + regulator-max-microvolt = <3700000>;
> > +
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + vreg_wcn_3p3: regulator-wcn-3p3 {
> > + compatible = "regulator-fixed";
> > +
> > + regulator-name = "VREG_WCN_3P3";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > +
> > + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > +
> > + pinctrl-0 = <&wcn_sw_en>;
> > + pinctrl-names = "default";
> > +
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + usb-1-ss0-sbu-mux {
> > + compatible = "onnn,fsusb42", "gpio-sbu-mux";
> > +
> > + enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>;
> > + select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>;
> > +
> > + pinctrl-0 = <&usb_1_ss0_sbu_default>;
> > + pinctrl-names = "default";
> > +
> > + mode-switch;
> > + orientation-switch;
> > +
> > + port {
> > + usb_1_ss0_sbu_mux: endpoint {
> > + remote-endpoint = <&pmic_glink_ss0_sbu>;
> > + };
> > + };
> > + };
> > +
> > + usb-1-ss1-sbu-mux {
> > + compatible = "onnn,fsusb42", "gpio-sbu-mux";
> > +
> > + enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
> > + select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
> > +
> > + pinctrl-0 = <&usb_1_ss1_sbu_default>;
> > + pinctrl-names = "default";
> > +
> > + mode-switch;
> > + orientation-switch;
> > +
> > + port {
> > + usb_1_ss1_sbu_mux: endpoint {
> > + remote-endpoint = <&pmic_glink_ss1_sbu>;
> > + };
> > + };
> > + };
> > +
> > + wcn7850-pmu {
> > + compatible = "qcom,wcn7850-pmu";
> > +
> > + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
> > + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
> > +
> > + pinctrl-0 = <&wcn_wlan_bt_en>;
> > + pinctrl-names = "default";
> > +
> > + regulators {
> > + vreg_pmu_rfa_cmn: ldo0 {
> > + regulator-name = "vreg_pmu_rfa_cmn";
> > + };
> > +
> > + vreg_pmu_aon_0p59: ldo1 {
> > + regulator-name = "vreg_pmu_aon_0p59";
> > + };
> > +
> > + vreg_pmu_wlcx_0p8: ldo2 {
> > + regulator-name = "vreg_pmu_wlcx_0p8";
> > + };
> > +
> > + vreg_pmu_wlmx_0p85: ldo3 {
> > + regulator-name = "vreg_pmu_wlmx_0p85";
> > + };
> > +
> > + vreg_pmu_btcmx_0p85: ldo4 {
> > + regulator-name = "vreg_pmu_btcmx_0p85";
> > + };
> > +
> > + vreg_pmu_rfa_0p8: ldo5 {
> > + regulator-name = "vreg_pmu_rfa_0p8";
> > + };
> > +
> > + vreg_pmu_rfa_1p2: ldo6 {
> > + regulator-name = "vreg_pmu_rfa_1p2";
> > + };
> > +
> > + vreg_pmu_rfa_1p8: ldo7 {
> > + regulator-name = "vreg_pmu_rfa_1p8";
> > + };
> > +
> > + vreg_pmu_pcie_0p9: ldo8 {
> > + regulator-name = "vreg_pmu_pcie_0p9";
> > + };
> > +
> > + vreg_pmu_pcie_1p8: ldo9 {
> > + regulator-name = "vreg_pmu_pcie_1p8";
> > + };
> > + };
> > + };
> > +};
> > +
> > +&apps_rsc {
> > + regulators-0 {
> > + compatible = "qcom,pm8550-rpmh-regulators";
> > + qcom,pmic-id = "b";
> > +
> > + vdd-bob1-supply = <&vph_pwr>;
> > + vdd-bob2-supply = <&vph_pwr>;
> > + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
> > + vdd-l2-l13-l14-supply = <&vreg_bob1>;
> > + vdd-l5-l16-supply = <&vreg_bob1>;
> > + vdd-l6-l7-supply = <&vreg_bob2>;
> > + vdd-l8-l9-supply = <&vreg_bob1>;
> > + vdd-l12-supply = <&vreg_s5j_1p2>;
> > + vdd-l15-supply = <&vreg_s4c_1p8>;
> > + vdd-l17-supply = <&vreg_bob2>;
> > +
> > + vreg_bob1: bob1 {
> > + regulator-name = "vreg_bob1";
> > + regulator-min-microvolt = <3008000>;
> > + regulator-max-microvolt = <3960000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_bob2: bob2 {
> > + regulator-name = "vreg_bob2";
> > + regulator-min-microvolt = <2504000>;
> > + regulator-max-microvolt = <3008000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l1b_1p8: ldo1 {
> > + regulator-name = "vreg_l1b_1p8";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l2b_3p0: ldo2 {
> > + regulator-name = "vreg_l2b_3p0";
> > + regulator-min-microvolt = <3072000>;
> > + regulator-max-microvolt = <3100000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l4b_1p8: ldo4 {
> > + regulator-name = "vreg_l4b_1p8";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l5b_3p0: ldo5 {
> > + regulator-name = "vreg_l5b_3p0";
> > + regulator-min-microvolt = <3000000>;
> > + regulator-max-microvolt = <3000000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l6b_1p8: ldo6 {
> > + regulator-name = "vreg_l6b_1p8";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <2960000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l7b_2p8: ldo7 {
> > + regulator-name = "vreg_l7b_2p8";
> > + regulator-always-on;
> > + regulator-min-microvolt = <2800000>;
> > + regulator-max-microvolt = <2800000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l8b_3p0: ldo8 {
> > + regulator-name = "vreg_l8b_3p0";
> > + regulator-min-microvolt = <3072000>;
> > + regulator-max-microvolt = <3072000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l9b_2p9: ldo9 {
> > + regulator-name = "vreg_l9b_2p9";
> > + regulator-min-microvolt = <2960000>;
> > + regulator-max-microvolt = <2960000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l10b_1p8: ldo10 {
> > + regulator-name = "vreg_l10b_1p8";
> > + regulator-always-on;
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l12b_1p2: ldo12 {
> > + regulator-name = "vreg_l12b_1p2";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + regulator-always-on;
> > + };
> > +
> > + vreg_l13b_3p0: ldo13 {
> > + regulator-name = "vreg_l13b_3p0";
> > + regulator-min-microvolt = <3072000>;
> > + regulator-max-microvolt = <3100000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l14b_3p0: ldo14 {
> > + regulator-name = "vreg_l14b_3p0";
> > + regulator-min-microvolt = <3072000>;
> > + regulator-max-microvolt = <3072000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l15b_1p8: ldo15 {
> > + regulator-name = "vreg_l15b_1p8";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + regulator-always-on;
> > + };
> > +
> > + vreg_l16b_2p9: ldo16 {
> > + regulator-name = "vreg_l16b_2p9";
> > + regulator-min-microvolt = <2912000>;
> > + regulator-max-microvolt = <2912000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l17b_2p5: ldo17 {
> > + regulator-name = "vreg_l17b_2p5";
> > + regulator-min-microvolt = <2504000>;
> > + regulator-max-microvolt = <2504000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > + };
> > +
> > + regulators-1 {
> > + compatible = "qcom,pm8550ve-rpmh-regulators";
> > + qcom,pmic-id = "c";
> > +
> > + vdd-l1-supply = <&vreg_s5j_1p2>;
> > + vdd-l2-supply = <&vreg_s1f_0p7>;
> > + vdd-l3-supply = <&vreg_s1f_0p7>;
> > + vdd-s4-supply = <&vph_pwr>;
> > +
> > + vreg_s4c_1p8: smps4 {
> > + regulator-name = "vreg_s4c_1p8";
> > + regulator-min-microvolt = <1856000>;
> > + regulator-max-microvolt = <2000000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l1c_1p2: ldo1 {
> > + regulator-name = "vreg_l1c_1p2";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l2c_0p8: ldo2 {
> > + regulator-name = "vreg_l2c_0p8";
> > + regulator-min-microvolt = <880000>;
> > + regulator-max-microvolt = <920000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l3c_0p8: ldo3 {
> > + regulator-name = "vreg_l3c_0p8";
> > + regulator-min-microvolt = <880000>;
> > + regulator-max-microvolt = <920000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > + };
> > +
> > + regulators-2 {
> > + compatible = "qcom,pmc8380-rpmh-regulators";
> > + qcom,pmic-id = "d";
> > +
> > + vdd-l1-supply = <&vreg_s1f_0p7>;
> > + vdd-l2-supply = <&vreg_s1f_0p7>;
> > + vdd-l3-supply = <&vreg_s4c_1p8>;
> > + vdd-s1-supply = <&vph_pwr>;
> > +
> > + vreg_l1d_0p8: ldo1 {
> > + regulator-name = "vreg_l1d_0p8";
> > + regulator-min-microvolt = <880000>;
> > + regulator-max-microvolt = <920000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l2d_0p9: ldo2 {
> > + regulator-name = "vreg_l2d_0p9";
> > + regulator-min-microvolt = <912000>;
> > + regulator-max-microvolt = <920000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l3d_1p8: ldo3 {
> > + regulator-name = "vreg_l3d_1p8";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > + };
> > +
> > + regulators-3 {
> > + compatible = "qcom,pmc8380-rpmh-regulators";
> > + qcom,pmic-id = "e";
> > +
> > + vdd-l2-supply = <&vreg_s1f_0p7>;
> > + vdd-l3-supply = <&vreg_s5j_1p2>;
> > +
> > + vreg_l2e_0p8: ldo2 {
> > + regulator-name = "vreg_l2e_0p8";
> > + regulator-min-microvolt = <880000>;
> > + regulator-max-microvolt = <920000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l3e_1p2: ldo3 {
> > + regulator-name = "vreg_l3e_1p2";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > + };
> > +
> > + regulators-4 {
> > + compatible = "qcom,pmc8380-rpmh-regulators";
> > + qcom,pmic-id = "f";
> > +
> > + vdd-l1-supply = <&vreg_s5j_1p2>;
> > + vdd-l2-supply = <&vreg_s5j_1p2>;
> > + vdd-l3-supply = <&vreg_s5j_1p2>;
> > + vdd-s1-supply = <&vph_pwr>;
> > +
> > + vreg_s1f_0p7: smps1 {
> > + regulator-name = "vreg_s1f_0p7";
> > + regulator-min-microvolt = <700000>;
> > + regulator-max-microvolt = <1100000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l1f_1p0: ldo1 {
> > + regulator-name = "vreg_l1f_1p0";
> > + regulator-min-microvolt = <1024000>;
> > + regulator-max-microvolt = <1024000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l2f_1p0: ldo2 {
> > + regulator-name = "vreg_l2f_1p0";
> > + regulator-min-microvolt = <1024000>;
> > + regulator-max-microvolt = <1024000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l3f_1p0: ldo3 {
> > + regulator-name = "vreg_l3f_1p0";
> > + regulator-min-microvolt = <1024000>;
> > + regulator-max-microvolt = <1024000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > + };
> > +
> > + regulators-6 {
> > + compatible = "qcom,pm8550ve-rpmh-regulators";
> > + qcom,pmic-id = "i";
> > +
> > + vdd-l1-supply = <&vreg_s4c_1p8>;
> > + vdd-l2-supply = <&vreg_s5j_1p2>;
> > + vdd-l3-supply = <&vreg_s1f_0p7>;
> > + vdd-s1-supply = <&vph_pwr>;
> > + vdd-s2-supply = <&vph_pwr>;
> > +
> > + vreg_s1i_0p9: smps1 {
> > + regulator-name = "vreg_s1i_0p9";
> > + regulator-min-microvolt = <900000>;
> > + regulator-max-microvolt = <920000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_s2i_1p0: smps2 {
> > + regulator-name = "vreg_s2i_1p0";
> > + regulator-min-microvolt = <1000000>;
> > + regulator-max-microvolt = <1100000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l1i_1p8: ldo1 {
> > + regulator-name = "vreg_l1i_1p8";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l2i_1p2: ldo2 {
> > + regulator-name = "vreg_l2i_1p2";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l3i_0p8: ldo3 {
> > + regulator-name = "vreg_l3i_0p8";
> > + regulator-min-microvolt = <880000>;
> > + regulator-max-microvolt = <920000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > + };
> > +
> > + regulators-7 {
> > + compatible = "qcom,pm8550ve-rpmh-regulators";
> > + qcom,pmic-id = "j";
> > +
> > + vdd-l1-supply = <&vreg_s1f_0p7>;
> > + vdd-l2-supply = <&vreg_s5j_1p2>;
> > + vdd-l3-supply = <&vreg_s1f_0p7>;
> > + vdd-s5-supply = <&vph_pwr>;
> > +
> > + vreg_s5j_1p2: smps5 {
> > + regulator-name = "vreg_s5j_1p2";
> > + regulator-min-microvolt = <1256000>;
> > + regulator-max-microvolt = <1304000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l1j_0p8: ldo1 {
> > + regulator-name = "vreg_l1j_0p8";
> > + regulator-min-microvolt = <880000>;
> > + regulator-max-microvolt = <920000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l2j_1p2: ldo2 {
> > + regulator-name = "vreg_l2j_1p2";
> > + regulator-min-microvolt = <1256000>;
> > + regulator-max-microvolt = <1256000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > +
> > + vreg_l3j_0p8: ldo3 {
> > + regulator-name = "vreg_l3j_0p8";
> > + regulator-min-microvolt = <880000>;
> > + regulator-max-microvolt = <920000>;
> > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > + };
> > + };
> > +};
> > +
> > +&camcc {
> > + status = "okay";
> > +};
> > +
> > +&gpu {
> > + status = "okay";
> > +
> > + zap-shader {
> > + firmware-name = "qcom/x1e80100/SAMSUNG/galaxy-book4-edge/qcdxkmsuc8380.mbn";
> > + };
> > +};
> > +
> > +&i2c0 {
> > + clock-frequency = <400000>;
> > +
> > + status = "okay";
> > +
> > + keyboard@5 {
> > + compatible = "hid-over-i2c";
> > + reg = <0x5>;
> > +
> > + hid-descr-addr = <0x20>;
> > + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
> > +
> > + pinctrl-0 = <&kybd_default>;
> > + pinctrl-names = "default";
> > +
> > + wakeup-source;
> > + };
> > +};
> > +
> > +&i2c5 {
> > + clock-frequency = <400000>;
> > +
> > + status = "okay";
> > +
> > + eusb5_repeater: redriver@43 {
> > + compatible = "nxp,ptn3222";
> > + reg = <0x43>;
> > + #phy-cells = <0>;
> > +
> > + vdd3v3-supply = <&vreg_l13b_3p0>;
> > + vdd1v8-supply = <&vreg_l4b_1p8>;
> > +
> > + reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
> > +
> > + pinctrl-0 = <&eusb5_reset_n>;
> > + pinctrl-names = "default";
> > + };
> > +
> > + eusb6_repeater: redriver@4f {
> > + compatible = "nxp,ptn3222";
> > + reg = <0x4f>;
> > + #phy-cells = <0>;
> > +
> > + vdd3v3-supply = <&vreg_l13b_3p0>;
> > + vdd1v8-supply = <&vreg_l4b_1p8>;
> > +
> > + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
> > +
> > + pinctrl-0 = <&eusb6_reset_n>;
> > + pinctrl-names = "default";
> > + };
> > +};
> > +
> > +
> > +&i2c8 {
> > + clock-frequency = <400000>;
> > +
> > + status = "okay";
> > +
> > + touchscreen@5d {
> > + compatible = "hid-over-i2c";
> > + reg = <0x5d>;
> > +
> > + hid-descr-addr = <0x1>;
> > + //interrupts-extended = <&tlmm 34 IRQ_TYPE_LEVEL_LOW>;
> > +
> > + vdd-supply = <&vreg_misc_3p3>;
> > +
> > + //pinctrl-0 = <&ts0_default>;
> > + //pinctrl-names = "default";
> > + };
> > +};
> > +
> > +&i2c13 {
> > + clock-frequency = <400000>;
> > +
> > + status = "okay";
> > +};
> > +
> > +&lpass_tlmm {
> > + spkr_01_sd_n_active: spkr-01-sd-n-active-state {
> > + pins = "gpio12";
> > + function = "gpio";
> > + drive-strength = <16>;
> > + bias-disable;
> > + output-low;
> > + };
> > +
> > + spkr_23_sd_n_active: spkr-23-sd-n-active-state {
> > + pins = "gpio13";
> > + function = "gpio";
> > + drive-strength = <16>;
> > + bias-disable;
> > + output-low;
> > + };
> > +};
> > +
> > +&lpass_vamacro {
> > + pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
> > + pinctrl-names = "default";
> > +
> > + vdd-micb-supply = <&vreg_l1b_1p8>;
> > + qcom,dmic-sample-rate = <4800000>;
> > +};
> > +
> > +&mdss {
> > + status = "okay";
> > +};
> > +
> > +&mdss_dp0 {
> > + status = "okay";
> > +};
> > +
> > +&mdss_dp0_out {
> > + data-lanes = <0 1>;
> > + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
> > +};
> > +
> > +&mdss_dp1 {
> > + status = "okay";
> > +};
> > +
> > +&mdss_dp1_out {
> > + data-lanes = <0 1>;
> > + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
> > +};
> > +
> > +&mdss_dp2 {
> > + status = "okay";
> > +};
> > +
> > +&mdss_dp2_out {
> > + data-lanes = <0 1 2 3>;
> > +};
> > +
> > +&mdss_dp3 {
> > + /delete-property/ #sound-dai-cells;
> > +
> > + pinctrl-0 = <&edp0_hpd_default>;
> > + pinctrl-names = "default";
> > +
> > + status = "okay";
> > +
> > + aux-bus {
> > + panel: panel {
> > + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
> > + power-supply = <&vreg_edp_3p3>;
> > + no-hpd;
> > +
> > + pinctrl-0 = <&edp_bl_en>;
> > + pinctrl-names = "default";
> > +
> > + port {
> > + edp_panel_in: endpoint {
> > + remote-endpoint = <&mdss_dp3_out>;
> > + };
> > + };
> > + };
> > + };
> > +
> > + ports {
> > + port@1 {
> > + reg = <1>;
> > + mdss_dp3_out: endpoint {
> > + data-lanes = <0 1 2 3>;
> > + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
> > +
> > + remote-endpoint = <&edp_panel_in>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +
> > +&mdss_dp3_phy {
> > + vdda-phy-supply = <&vreg_l3j_0p8>;
> > + vdda-pll-supply = <&vreg_l2j_1p2>;
> > +
> > + status = "okay";
> > +};
> > +
> > +&pcie4 {
> > + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
> > + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
> > +
> > + pinctrl-0 = <&pcie4_default>;
> > + pinctrl-names = "default";
> > +
> > + status = "okay";
> > +};
> > +
> > +&pcie4_phy {
> > + vdda-phy-supply = <&vreg_l3i_0p8>;
> > + vdda-pll-supply = <&vreg_l3e_1p2>;
> > +
> > + status = "okay";
> > +};
> > +
> > +&pcie4_port0 {
> > + wifi@0 {
> > + compatible = "pci17cb,1107";
> > + reg = <0x10000 0x0 0x0 0x0 0x0>;
> > +
> > + vddaon-supply = <&vreg_pmu_aon_0p59>;
> > + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> > + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> > + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> > + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> > + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> > + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
> > + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> > + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
> > + };
> > +};
> > +
> > +&pm8550ve_8_gpios {
> > + misc_3p3_reg_en: misc-3p3-reg-en-state {
> > + pins = "gpio6";
> > + function = "normal";
> > + bias-disable;
> > + input-disable;
> > + output-enable;
> > + drive-push-pull;
> > + power-source = <1>; /* 1.8 V */
> > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
> > + };
> > +};
> > +
> > +&pmc8380_3_gpios {
> > + edp_bl_en: edp-bl-en-state {
> > + pins = "gpio4";
> > + function = "normal";
> > + power-source = <1>; /* 1.8V */
> > + input-disable;
> > + output-enable;
> > + };
> > +};
> > +
> > +&qupv3_0 {
> > + status = "okay";
> > +};
> > +
> > +&qupv3_1 {
> > + status = "okay";
> > +};
> > +
> > +&qupv3_2 {
> > + status = "okay";
> > +};
> > +
> > +&remoteproc_adsp {
> > + firmware-name = "qcom/x1e80100/SAMSUNG/galaxy-book4-edge/qcadsp8380.mbn",
> > + "qcom/x1e80100/SAMSUNG/galaxy-book4-edge/adsp_dtbs.elf";
> > +
> > + status = "okay";
> > +};
> > +
> > +&remoteproc_cdsp {
> > + firmware-name = "qcom/x1e80100/SAMSUNG/galaxy-book4-edge/qccdsp8380.mbn",
> > + "qcom/x1e80100/SAMSUNG/galaxy-book4-edge/cdsp_dtbs.elf";
> > +
> > + status = "okay";
> > +};
> > +
> > +&swr0 {
> > + status = "okay";
> > +
> > + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
> > + pinctrl-names = "default";
> > +
> > + /* WSA8845, Left Woofer */
> > + left_woofer: speaker@0,0 {
> > + compatible = "sdw20217020400";
> > + reg = <0 0>;
> > + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
> > + #sound-dai-cells = <0>;
> > + sound-name-prefix = "WooferLeft";
> > + vdd-1p8-supply = <&vreg_l15b_1p8>;
> > + vdd-io-supply = <&vreg_l12b_1p2>;
> > + qcom,port-mapping = <1 2 3 7 10 13>;
> > + };
> > +
> > + /* WSA8845, Left Tweeter */
> > + left_tweeter: speaker@0,1 {
> > + compatible = "sdw20217020400";
> > + reg = <0 1>;
> > + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
> > + #sound-dai-cells = <0>;
> > + sound-name-prefix = "TweeterLeft";
> > + vdd-1p8-supply = <&vreg_l15b_1p8>;
> > + vdd-io-supply = <&vreg_l12b_1p2>;
> > + qcom,port-mapping = <4 5 6 7 11 13>;
> > + };
> > +};
> > +
> > +&swr1 {
> > + status = "okay";
> > +
> > + /* WCD9385 RX */
> > + wcd_rx: codec@0,4 {
> > + compatible = "sdw20217010d00";
> > + reg = <0 4>;
> > + qcom,rx-port-mapping = <1 2 3 4 5>;
> > + };
> > +};
> > +
> > +&swr2 {
> > + status = "okay";
> > +
> > + /* WCD9385 TX */
> > + wcd_tx: codec@0,3 {
> > + compatible = "sdw20217010d00";
> > + reg = <0 3>;
> > + qcom,tx-port-mapping = <2 2 3 4>;
> > + };
> > +};
> > +
> > +&swr3 {
> > + status = "okay";
> > +
> > + pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
> > + pinctrl-names = "default";
> > +
> > + /* WSA8845, Right Woofer */
> > + right_woofer: speaker@0,0 {
> > + compatible = "sdw20217020400";
> > + reg = <0 0>;
> > + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
> > + #sound-dai-cells = <0>;
> > + sound-name-prefix = "WooferRight";
> > + vdd-1p8-supply = <&vreg_l15b_1p8>;
> > + vdd-io-supply = <&vreg_l12b_1p2>;
> > + qcom,port-mapping = <1 2 3 7 10 13>;
> > + };
> > +
> > + /* WSA8845, Right Tweeter */
> > + right_tweeter: speaker@0,1 {
> > + compatible = "sdw20217020400";
> > + reg = <0 1>;
> > + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
> > + #sound-dai-cells = <0>;
> > + sound-name-prefix = "TweeterRight";
> > + vdd-1p8-supply = <&vreg_l15b_1p8>;
> > + vdd-io-supply = <&vreg_l12b_1p2>;
> > + qcom,port-mapping = <4 5 6 7 11 13>;
> > + };
> > +};
> > +
> > +&tlmm {
> > + gpio-reserved-ranges = <34 2>, /* Unused */
> > + <44 4>; /* SPI (TPM) */
> > +
> > + edp_reg_en: edp-reg-en-state {
> > + pins = "gpio70";
> > + function = "gpio";
> > + drive-strength = <16>;
> > + bias-pull-up;
> > + output-low;
> > + };
> > +
> > + octa_vdd_en: octa-vdd-en-state {
> > + pins = "gpio111";
> > + function = "gpio";
> > + drive-strength = <16>;
> > + bias-pull-up;
> > + output-high;
> > + };
> > +
> > + display_vdd_en: display-vdd-en-state {
> > + pins = "gpio120";
> > + function = "gpio";
> > + drive-strength = <16>;
> > + bias-pull-up;
> > + output-high;
> > + };
> > +
> > + edp0_hpd_default: edp0-hpd-default-state {
> > + pins = "gpio119";
> > + function = "edp0_hot";
> > + bias-pull-down;
> > + input-enable;
> > + drive-strength = <2>;
> > + };
> > +
> > +
> > + hall_int_n_default: hall-int-n-state {
> > + pins = "gpio92";
> > + function = "gpio";
> > + bias-disable;
> > + };
> > +
> > + kybd_default: kybd-default-state {
> > + pins = "gpio67";
> > + function = "gpio";
> > + bias-disable;
> > + };
> > +
> > + hdmi_hpd_default: hdmi-hpd-default-state {
> > + pins = "gpio126";
> > + function = "usb2_dp";
> > + bias-disable;
> > + };
> > +
> > + eusb5_reset_n: eusb5-reset-n-state {
> > + pins = "gpio7";
> > + function = "gpio";
> > + drive-strength = <2>;
> > + bias-disable;
> > + output-low;
> > + };
> > +
> > + eusb6_reset_n: eusb6-reset-n-state {
> > + pins = "gpio184";
> > + function = "gpio";
> > + drive-strength = <2>;
> > + bias-disable;
> > + output-low;
> > + };
> > +
> > + pcie4_default: pcie4-default-state {
> > + clkreq-n-pins {
> > + pins = "gpio147";
> > + function = "pcie4_clk";
> > + drive-strength = <2>;
> > + bias-pull-up;
> > + };
> > +
> > + perst-n-pins {
> > + pins = "gpio146";
> > + function = "gpio";
> > + drive-strength = <2>;
> > + bias-disable;
> > + };
> > +
> > + wake-n-pins {
> > + pins = "gpio148";
> > + function = "gpio";
> > + drive-strength = <2>;
> > + bias-pull-up;
> > + };
> > + };
> > +
> > + tpad_default: tpad-default-state {
> > + pins = "gpio3";
> > + function = "gpio";
> > + bias-disable;
> > + };
> > +
> > + ts0_default: ts0-default-state {
> > + int-n-pins {
> > + pins = "gpio51";
> > + function = "gpio";
> > + bias-disable;
> > + };
> > +
> > + reset-n-pins {
> > + pins = "gpio48";
> > + function = "gpio";
> > + output-high;
> > + drive-strength = <16>;
> > + };
> > + };
> > +
> > + usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
> > + mode-pins {
> > + pins = "gpio166";
> > + function = "gpio";
> > + bias-disable;
> > + drive-strength = <2>;
> > + output-high;
> > + };
> > +
> > + oe-n-pins {
> > + pins = "gpio168";
> > + function = "gpio";
> > + bias-disable;
> > + drive-strength = <2>;
> > + };
> > +
> > + sel-pins {
> > + pins = "gpio167";
> > + function = "gpio";
> > + bias-disable;
> > + drive-strength = <2>;
> > + };
> > +
> > + };
> > +
> > + usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
> > + mode-pins {
> > + pins = "gpio177";
> > + function = "gpio";
> > + bias-disable;
> > + drive-strength = <2>;
> > + output-high;
> > + };
> > +
> > + oe-n-pins {
> > + pins = "gpio179";
> > + function = "gpio";
> > + bias-disable;
> > + drive-strength = <2>;
> > + };
> > +
> > + sel-pins {
> > + pins = "gpio178";
> > + function = "gpio";
> > + bias-disable;
> > + drive-strength = <2>;
> > + };
> > + };
> > +
> > + wcn_sw_en: wcn-sw-en-state {
> > + pins = "gpio214";
> > + function = "gpio";
> > + drive-strength = <2>;
> > + bias-disable;
> > + };
> > +
> > + wcn_wlan_bt_en: wcn-wlan-bt-en-state {
> > + pins = "gpio116", "gpio117";
> > + function = "gpio";
> > + drive-strength = <2>;
> > + bias-disable;
> > + };
> > +
> > + wcd_default: wcd-reset-n-active-state {
> > + pins = "gpio191";
> > + function = "gpio";
> > + drive-strength = <16>;
> > + bias-disable;
> > + output-low;
> > + };
> > +};
> > +
> > +&ufs_mem_hc {
> > + status = "okay";
> > +
> > + reset-gpios = <&tlmm 238 GPIO_ACTIVE_LOW>;
> > + vcc-supply = <&vreg_l17b_2p5>;
> > + vcc-max-microamp = <600000>;
> > +
> > + vccq-supply = <&vreg_l2i_1p2>;
> > + vccq-max-microamp = <600000>;
> > +};
> > +
> > +&ufs_mem_phy {
> > + status = "okay";
> > +
> > + vdda-phy-supply = <&vreg_l3i_0p8>;
> > + vdda-pll-supply = <&vreg_l3e_1p2>;
> > +};
> > +
> > +&uart14 {
> > + status = "okay";
> > +
> > + bluetooth {
> > + compatible = "qcom,wcn7850-bt";
> > + max-speed = <3200000>;
> > +
> > + vddaon-supply = <&vreg_pmu_aon_0p59>;
> > + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> > + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> > + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> > + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> > + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> > + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
> > + };
> > +};
> > +
> > +&uart21 {
> > + compatible = "qcom,geni-debug-uart";
> > + status = "okay";
> > +};
> > +
> > +&usb_1_ss0 {
> > + status = "okay";
> > +};
> > +
> > +&usb_1_ss0_hsphy {
> > + vdd-supply = <&vreg_l3j_0p8>;
> > + vdda12-supply = <&vreg_l2j_1p2>;
> > +
> > + status = "okay";
> > +};
> > +
> > +&usb_1_ss0_qmpphy {
> > + vdda-phy-supply = <&vreg_l2j_1p2>;
> > + vdda-pll-supply = <&vreg_l1j_0p8>;
> > +
> > + status = "okay";
> > +};
> > +
> > +&usb_1_ss0 {
> > + dr_mode = "host";
> > +};
> > +
> > +&usb_1_ss0_dwc3_hs {
> > + remote-endpoint = <&pmic_glink_ss0_hs_in>;
> > +};
> > +
> > +&usb_1_ss0_qmpphy_out {
> > + remote-endpoint = <&pmic_glink_ss0_ss_in>;
> > +};
> > +
> > +&usb_1_ss1 {
> > + status = "okay";
> > +};
> > +
> > +&usb_1_ss1_hsphy {
> > + vdd-supply = <&vreg_l3j_0p8>;
> > + vdda12-supply = <&vreg_l2j_1p2>;
> > +
> > + status = "okay";
> > +};
> > +
> > +&usb_1_ss1_qmpphy {
> > + vdda-phy-supply = <&vreg_l2j_1p2>;
> > + vdda-pll-supply = <&vreg_l2d_0p9>;
> > +
> > + status = "okay";
> > +};
> > +
> > +&usb_1_ss1 {
> > + dr_mode = "host";
> > +};
> > +
> > +&usb_1_ss1_dwc3_hs {
> > + remote-endpoint = <&pmic_glink_ss1_hs_in>;
> > +};
> > +
> > +&usb_1_ss1_qmpphy_out {
> > + remote-endpoint = <&pmic_glink_ss1_ss_in>;
> > +};
> > +
> > +&usb_1_ss2_qmpphy {
> > + vdda-phy-supply = <&vreg_l2j_1p2>;
> > + vdda-pll-supply = <&vreg_l2d_0p9>;
> > +
> > + /delete-property/ mode-switch;
> > + /delete-property/ orientation-switch;
> > +
> > + status = "okay";
> > +
> > + ports {
> > + port@0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + /delete-node/ endpoint;
> > +
> > + usb_1_ss2_qmpphy_out_dp: endpoint@0 {
> > + reg = <0>;
> > +
> > + data-lanes = <3 2 1 0>;
> > + remote-endpoint = <&hdmi_bridge_dp_in>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +
> > +/* MP0 goes to the USB-A port(USB3) and FPC */
> > +&usb_mp {
> > + status = "okay";
> > +
> > + /* Limit to single port */
> > + phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>;
> > + phy-names = "usb2-0", "usb3-0";
> > +};
> > +
> > +&usb_mp_hsphy0 {
> > + vdd-supply = <&vreg_l2e_0p8>;
> > + vdda12-supply = <&vreg_l3e_1p2>;
> > +
> > + phys = <&eusb6_repeater>;
> > +
> > + status = "okay";
> > +};
> > +
> > +&usb_mp_qmpphy0 {
> > + vdda-phy-supply = <&vreg_l3e_1p2>;
> > + vdda-pll-supply = <&vreg_l3c_0p8>;
> > +
> > + status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-samsung-galaxy-book4-edge-14.dts b/arch/arm64/boot/dts/qcom/x1e80100-samsung-galaxy-book4-edge-14.dts
> > new file mode 100644
> > index 000000000..333a69a8a
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/x1e80100-samsung-galaxy-book4-edge-14.dts
> > @@ -0,0 +1,28 @@
> > +// SPDX-License-Identifier: BSD-3-Clause
> > +
> > +/dts-v1/;
> > +
> > +#include "x1-samsung-galaxy-book4-edge.dtsi"
> > +
> > +/ {
> > + model = "Samsung Galaxy Book4 Edge (14 inch)";
> > + compatible = "samsung,galaxy-book4-edge-14", "samsung,galaxy-book4-edge",
> > + "qcom,x1e80100";
> > +};
> > +
> > +&i2c13 {
> > + touchpad@40 {
> > + compatible = "hid-over-i2c";
> > + reg = <0x40>;
> > +
> > + hid-descr-addr = <0xe>;
> > + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
> > +
> > + pinctrl-0 = <&tpad_default>;
> > + pinctrl-names = "default";
> > + };
> > +};
> > +
> > +&panel {
> > + compatible = "samsung,atna40cu07", "samsung,atna33xc20";
> > +};
> > diff --git a/arch/arm64/boot/dts/qcom/x1e84100-samsung-galaxy-book4-edge-16.dts b/arch/arm64/boot/dts/qcom/x1e84100-samsung-galaxy-book4-edge-16.dts
> > new file mode 100644
> > index 000000000..947eea411
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/x1e84100-samsung-galaxy-book4-edge-16.dts
> > @@ -0,0 +1,31 @@
> > +// SPDX-License-Identifier: BSD-3-Clause
> > +
> > +/dts-v1/;
> > +
> > +#include "x1-samsung-galaxy-book4-edge.dtsi"
> > +
> > +/ {
> > + model = "Samsung Galaxy Book4 Edge (16 inch)";
> > + compatible = "samsung,galaxy-book4-edge-16", "samsung,galaxy-book4-edge",
> > + "qcom,x1e80100";
> > +};
> > +
> > +&i2c13 {
> > + touchpad@50 {
> > + compatible = "hid-over-i2c";
> > + reg = <0x50>;
> > +
> > + hid-descr-addr = <0xd1>;
> > + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
> > +
> > + vdd-supply = <&vreg_misc_3p3>;
> > + vddl-supply = <&vreg_l15b_1p8>;
> > +
> > + pinctrl-0 = <&tpad_default>;
> > + pinctrl-names = "default";
> > + };
> > +};
> > +
> > +&panel {
> > + compatible = "samsung,atna60cl07", "samsung,atna33xc20";
> > +};
> > --
> > 2.43.0
> >