Re: [PATCH v3 1/7] ASoC: dt-bindings: ti,pcm1681: Document the optional SCK clock

[Mohammad Rafi Shaik]

On 10/13/2026 12:31 PM, Krzysztof Kozlowski wrote:
> On Fri, Oct 09, 2026 at 06:42:47PM +0530, Mohammad Rafi Shaik wrote:
> > The PCM1681 can use an external system clock supplied on the SCK input
> > pin. Platforms that provide this clock need a way to describe the clock
> > connection in Device Tree.
> >
> > Document the optional 'clocks' and 'clock-names' properties and define
> > the clock name as "sck" to represent the external system clock source.
> >
> > This allows boards using an externally supplied SCK clock to accurately
> > describe the hardware configuration.
> >
> > Reviewed-by: Shawn Guo <shengchao.guo@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@xxxxxxxxxxxxxxxx>
> > ---
> >   Documentation/devicetree/bindings/sound/ti,pcm1681.yaml | 7 +++++++
> >   1 file changed, 7 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/sound/ti,pcm1681.yaml b/Documentation/devicetree/bindings/sound/ti,pcm1681.yaml
> > index 1f0e6787a..1b3803518 100644
> > --- a/Documentation/devicetree/bindings/sound/ti,pcm1681.yaml
> > +++ b/Documentation/devicetree/bindings/sound/ti,pcm1681.yaml
> > @@ -21,6 +21,13 @@ properties:
> >     reg:
> >       maxItems: 1
> >   
> > +  clocks:
> > +    maxItems: 1
> > +    description: System clock (SCK)
> > +
> > +  clock-names:
> > +    const: sck
>
> Drop the names. If they are needed for any reason, then use the same
> name other device uses already, so scki.

Ack,

Yes, the clock name is required as it represents the system clock.

I’ll use scki, consistent with the other implementations.

Best Regards,
Rafi.

> Best regards,
> Krzysztof