[PATCH 2/2] drm/panel: simple: Add AUO B101UAN01 panel

[Asif Ikbal]

Add support for the AU Optronics B101UAN01 1920x1200 10.1" WUXGA
MIPI-DSI TFT LCD panel.

The mode is taken from the MIPI interface timing section of the
B101UAN01.7 (H/W 1A) datasheet and gives a 60 Hz refresh rate.

Signed-off-by: Asif Ikbal <asif.ikbal@xxxxxxx>
---
 drivers/gpu/drm/panel/panel-simple.c | 32 ++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index a944c34642dc..46ec17b6c365 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -6389,6 +6389,35 @@ static const struct panel_desc_dsi auo_b080uan01 = {
 	.lanes = 4,
 };
 
+static const struct drm_display_mode auo_b101uan01_mode = {
+	.clock = 148350,
+	.hdisplay = 1920,
+	.hsync_start = 1920 + 40,
+	.hsync_end = 1920 + 40 + 40,
+	.htotal = 1920 + 40 + 40 + 40,
+	.vdisplay = 1200,
+	.vsync_start = 1200 + 4,
+	.vsync_end = 1200 + 4 + 4,
+	.vtotal = 1200 + 4 + 4 + 4,
+	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+static const struct panel_desc_dsi auo_b101uan01 = {
+	.desc = {
+		.modes = &auo_b101uan01_mode,
+		.num_modes = 1,
+		.bpc = 8,
+		.size = {
+			.width = 217,
+			.height = 136,
+		},
+		.connector_type = DRM_MODE_CONNECTOR_DSI,
+	},
+	.flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+	.format = MIPI_DSI_FMT_RGB888,
+	.lanes = 4,
+};
+
 static const struct drm_display_mode boe_tv080wum_nl0_mode = {
 	.clock = 160000,
 	.hdisplay = 1200,
@@ -6572,6 +6601,9 @@ static const struct of_device_id dsi_of_match[] = {
 	{
 		.compatible = "auo,b080uan01",
 		.data = &auo_b080uan01
+	}, {
+		.compatible = "auo,b101uan01",
+		.data = &auo_b101uan01
 	}, {
 		.compatible = "boe,tv080wum-nl0",
 		.data = &boe_tv080wum_nl0
-- 
2.43.0