[PATCH 2/3] dt-bindings: net: realtek,rtl9301-switch: add port LED controller

[Ross Cawston]

The switch drives the port LEDs, and some boards wire LEDs to it that
have no hardware function and are switched in software, such as PoE
status LEDs. Allow the software LED control block, described by
realtek,rtl9301-port-leds, as a child of the switch like its I2C and
MDIO controllers.

Signed-off-by: Ross Cawston <ross@xxxxxxx>
---
 .../devicetree/bindings/net/realtek,rtl9301-switch.yaml        | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/realtek,rtl9301-switch.yaml b/Documentation/devicetree/bindings/net/realtek,rtl9301-switch.yaml
index 80eabc17066..9529327ee0c 100644
--- a/Documentation/devicetree/bindings/net/realtek,rtl9301-switch.yaml
+++ b/Documentation/devicetree/bindings/net/realtek,rtl9301-switch.yaml
@@ -57,6 +57,9 @@ patternProperties:
   'mdio-controller@[0-9a-f]+$':
     $ref: realtek,rtl9301-mdio.yaml#
 
+  'led-controller@[0-9a-f]+$':
+    $ref: /schemas/leds/realtek,rtl9301-port-leds.yaml#
+
 required:
   - compatible
   - reg
-- 
2.55.0.windows.5